NETCONF Working Group                                     Mohamad Badra
Internet Draft                                         LIMOS Laboratory
Intended status: Standard Standards Track                         January 1,                      February 15, 2008
Expires: August 2008

                NETCONF over TLS
                       draft-ietf-netconf-tls-00.txt Transport Layer Security (TLS)
                       draft-ietf-netconf-tls-01.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

   This Internet-Draft will expire on July 1, August 15, 2008.

Copyright Notice

   Copyright (C) The IETF Trust (2008).

Abstract

   The NETCONF configuration protocol Network Configuration Protocol (NETCONF) provides mechanisms to
   install, manipulate, and delete the configuration of network devices.
   This document describes how to use TLS the Transport Layer Protocol (TLS)
   to secure NETCONF exchanges.

Table of Contents

   1. Introduction...................................................2
      1.1. Conventions used in this document.........................2
   2. NETCONF over TLS...............................................3
      2.1. Connection Initiation.....................................3
      2.2. Connection Closure........................................3
   3. Endpoint Authentication and Identification.....................4
      3.1. Public Key Based-Certificate Authentication...............4
         3.1.1. Server Identity......................................4
         3.1.2. Client Identity......................................5 Identity...........................................4
      3.2. Client Identity...........................................5
      3.3. Password-Based Authentication for the NETCONF manager (TLS
      client)........................................................5 Authentication.............................5
   4. Security Considerations........................................6 Cipher Suite Requirements......................................7
   5. IANA Considerations............................................6 Security Considerations........................................7
   6. Acknowledgments................................................6 IANA Considerations............................................7
   7. Acknowledgments................................................7
   8. References.....................................................7
      7.1.
      8.1. Normative References......................................7
      7.2. Informative References....................................7
   Author's Addresses................................................8
   Intellectual Property Statement...................................8
   Disclaimer of Validity............................................8 Validity............................................9

1. Introduction

   The NETCONF protocol [NETCONF] [RFC4741] defines a simple mechanism through
   which a network device can be managed.  NETCONF is connection-
   oriented, requiring a persistent connection between peers.  This
   connection must provide reliable, sequenced data delivery, integrity
   and confidentiality and peers authentication.  This document
   describes how to use TLS [TLS] [RFC4346] to secure NETCONF connections.

1.1. Conventions used in

   Throughout this document

   This document uses document, the following terms:

      manager
      It refers terms "client" and "server" are used to
   refer to the end initiating two ends of the NETCONF TLS connection. It issues  The client actively
   opens the TLS connection, and the server passively listens for the
   incoming TLS connection.  The terms "manager" and "agent" are used to
   refer to the two ends of the NETCONF RPC commands. protocol session.  The manager
   issues NETCONF remote procedure call (RPC) commands, and the agent
      It refers
   replies to those commands.  When NETCONF is run over TLS using the end replying to
   mapping defined in this document, the manager's commands during client is always the
      NETCONF connection. manager,
   and the server is always the agent.

1.1. Conventions used in this document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC-2119 [RFC2119].

2. NETCONF over TLS

   Since TLS is application protocol-independent, NETCONF can operate on
   top of the TLS protocol transparently.  This document defines how
   NETCONF can be used within a Transport Layer Security (TLS) session.

2.1. Connection Initiation

   The peer acting as the NETCONF manager MUST also act as the TLS
   client.  It MUST connect to the server that passively listens for the
   incoming TLS connection on the IANA-to-be-assigned TCP port <TBC>. <TBA>.
   It MUST therefore send the TLS ClientHello to begin the TLS
   handshake.  Once the TLS handshake has been finished, the manager client and
   the agent server MAY then send their NETCONF exchanges.  In particular, the manager
   client will send complete XML documents to the server containing
   <rpc> elements, and the agent server will respond with complete XML
   documents containing <rpc-reply> elements.  The client MAY indicate
   interest in receiving event notifications from a NETCONF server by
   creating a subscription to receive event notifications [NETNOT], in
   which the NETCONF server replies to indicate whether the subscription
   request was successful and, if it was successful, begins sending the
   event notifications to the NETCONF client as the events occur within
   the system.  All these elements are encapsulated into TLS records of
   type "application data".  These records are protected using the TLS
   material keys.

   Current NETCONF messages don't include a message's length.  This
   document uses consequently the same delimiter sequence defined in
   [NETSSH]
   [RFC4742] and therefore the special character sequence, ]]>]]>, to
   delimit XML documents.

2.2. Connection Closure

   Either NETCONF peer MAY stop the NETCONF connection at any time and
   therefore notify the other NETCONF peer that no more data on this
   channel will be sent and that any data received after a closure
   request will be ignored.  This MAY happen when no data is received
   from a connection for a long time, where the application decides what
   "long" means.

   TLS has the ability for secure connection closure using the Alert
   protocol.  When the NETCONF peer processes a closure request of the
   NETCONF connection, it MUST send a TLS close_notify alert before
   closing the connection.  Any data received after a closure alert is
   ignored.

   Unless some other fatal alert has been transmitted, each party is
   required to send a close_notify alert before closing the write side
   of the connection.  The other party MUST respond with a close_notify
   alert of its own and close down the connection immediately,
   discarding any pending writes.  It is not required for the initiator
   of the close to wait for the responding close_notify alert before
   closing the read side of the connection.

3. Endpoint Authentication and Identification

   Usually, TLS uses public key based-certificates [TLS], Kerberos
   [TLSKERB], or preshared keys [TLSPSK] for authentication.

3.1. Public Key Based-Certificate Authentication

   When public key is used for authentication, TLS supports three
   authentication modes:

   NETCONF requires that its transport provide mutual authentication of both parties, server
   authentication with an unauthenticated client,
   client and total anonymity.
   For server, so cipher suites that are anonymous or which only
   authenticate the last two modes, a profile server to enable the password-based client
   (manager) MUST NOT be used with NETCONF.
   This document specifies how to use TLS with endpoint authentication is defined
   in TLS can be based on either preshared keys [RFC4279] or public key
   certificates [RFC4346].  Some cipher suites (e.g.
   TLS_RSA_PSK_WITH_AES_128_CBC_SHA) use both.  Section 3.1 describes
   how the client authenticates the server if public key certificates
   are provided by the server, section 3.2.

3.1.1. 3.2 describes how the server
   authenticates the client if public key certificates are provided by
   the client, and section 3.3 describes how the client and server
   mutually authenticate one another using a password.

3.1. Server Identity

   During the TLS negotiation, the client MUST carefully examine the
   certificate presented by the server to determine if it meets their
   expectations.  Particularly, the client MUST check its understanding
   of the server hostname against the server's identity as presented in
   the server Certificate message, in order to prevent man-in-the-middle
   attacks.

   Matching is performed according to these rules [RFC4642]:

      - The client MUST use the server hostname it used to open the
        connection (or the hostname specified in TLS "server_name"
        extension [TLSEXT]) [RFC4366]) as the value to compare against the server
        name as expressed in the server certificate.  The client MUST
        NOT use any form of the server hostname derived from an
        insecure remote source (e.g., insecure DNS lookup).  CNAME
        canonicalization is not done.

      - If a subjectAltName extension of type dNSName is present in the
        certificate, it MUST be used as the source of the server's
        identity.

      - Matching is case-insensitive.

      - A "*" wildcard character MAY be used as the left-most name
        component in the certificate.  For example, *.example.com would
        match a.example.com, foo.example.com, etc., but would not match
        example.com.

      - If the certificate contains multiple names (e.g., more than one
        dNSName field), then a match with any one of the fields is
        considered acceptable.

   If the match fails, the client MUST either ask for explicit user
   confirmation or terminate the connection and indicate the server's
   identity is suspect.

   Additionally, clients MUST verify the binding between the identity of
   the servers to which they connect and the public keys presented by
   those servers.  Clients SHOULD implement the algorithm in Section 6
   of
   [PKICERT] [RFC3280] for general certificate validation, but MAY supplement
   that algorithm with other validation methods that achieve equivalent
   levels of verification (such as comparing the server certificate
   against a local store of already-verified certificates and identity
   bindings).

   If the client has external information as to the expected identity of
   the server, the hostname check MAY be omitted.

3.1.2.

3.2. Client Identity

   Typically, the server has no external knowledge of what the client's
   identity ought to be and so checks (other than that the client has a
   certificate chain rooted in an appropriate CA) are not possible.  If
   a server has such knowledge (typically from some source external to
   NETCONF or TLS) it MUST check the identity as described above.

3.2.

3.3. Password-Based Authentication for the NETCONF manager (TLS client)

   RFC4279

   [RFC4279] supports authentication based on pre-shared keys (PSKs).
   These pre-shared keys are symmetric keys, shared in advance among the
   communicating parties.

   The PSK can be generated in many ways and its length is variable.
   Implementation of this document MAY rely on RFC4279 [RFC4279] to enable
   password based user authentication.  In this case, the hashed version
   of the password is stored is
   used to generate the PSK.  It is RECOMMENDED that implementations
   that allow the administrator to manually configure the password also
   provide functionality for generating a new random password, taking RFC4086
   [RFC4086] into account.

   This document generates the PSK from the password as follow:

    PSK = SHA-1(SHA-1(stored-hash SHA-1(SHA-1(password + psk_identity + "Key Pad for Netconf") +
                psk_identity_hint)

   Where + means concatenation.

   The stored-hash is the hashed version of the password.

   The label "Key Pad for Netconf" is an ASCII string.

   The psk_identity_hint is initially defined in section 5.1 of RFC4279.
   [RFC4279].  The psk_identity_hint can do double duty and also provide
   a form of server authentication in the case where the user has the
   same password on a number of NETCONF agents. servers.  If a hint is provided,
   the psk_identity_hint is encoded in the same way as in [RFC4279] and
   should be a string representation of the name of the server
   recognizable to the administrator or his software.  In the case where
   the user types a server name to connect to, it should be that string.
   If the string the user enters differs from the one returned as
   psk_identity_hint, the software could display the server's name and
   ask the user to confirm.  For automated scripts, the names could be
   expected to match.  It is highly recommended that implementations set
   the psk_identity_hint to the DNS name of the NETCONF agent server (i.e.,
   the TLS server).

   It is RECOMMENDED that users choose different passwords for the
   different servers they manage.

      Note 1: The NETCONF over TLS implementation need not store the
      password in clear text, but rather can store the value of SHA-
      1(SHA-1(password + psk_identity + "Key Pad for Netconf") +
      psk_identity_hint), which could not be used as a password
      equivalent for applications other than NETCONF.  Deriving the PSK
      from a password is not secure.  This construction is used because
      it is anticipated that people will do it anyway.

      Note 2: [RFC4279] defines some conformance requirements for the
      PSK, for the PSK identity encoding and for the identity hint. The
      same requirements apply here as well; in particular on the
      password.  Moreover, the management interface by which the
      password is provided MUST accept ASCII strings of at least 64
      octets and MUST NOT add a null terminator before using them as
      shared secrets.  It MUST also accept a HEX encoding of the
      password.  The management interface MAY accept other encodings if
      the algorithm for translating the encoding to a binary string is
      specified.

4. Cipher Suite Requirements

   A compliant implementation of the protocol specified in this document
   MUST implement the cipher suite TLS_DHE_PSK_WITH_AES_128_CBC_SHA and
   MAY implement any TLS cipher suite that provides mutual
   authentication.

5. Security Considerations

   The security considerations described throughout [TLS] [RFC4346] and [TLSPSK]
   [RFC4279] apply here as well.

5.

   As with all schemes involving shared keys and passwords, special care
   should be taken to protect the shared values and passwords as well as
   to limit their exposure over time.  Alternatively, using certificates
   would provide better protection.

6. IANA Considerations

   IANA is requested to assign a TCP port number that will be the
   default port for NETCONF over TLS sessions as defined in this
   document.

   IANA has assigned port <TBD> <TBA> for this purpose.

6.

7. Acknowledgments

   A significant amount of the text in this document was lifted from
   [RFC4642].

   The author would like to acknowledge David Harrington, Miao Fuyou,
   Eric Rescorla and Rescorla, Juergen Schoenwaelder and the NETCONF mailing list
   members for their detailed reviews of the content of comments on the document.  The author appreciates
   also David Harrington, Miao Fuyou Bert Wijnen and Dan Romascanu for their effort efforts on issues
   resolving discussion, and Charlie Kaufman for his contribution the thorough review of
   this document and for the helpful comments on the password-based
   authentication.

7.

8. References

7.1.

8.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [NETCONF] Enns,

   [RFC3280] Housley, R., "NETCONF Configuration Protocol", Polk, W., Ford, W., and D. Solo, "Internet
             X.509 Public Key Infrastructure Certificate and Certificate
             Revocation List (CRL) Profile", RFC 4741, 3280, April 2002.

   [RFC4086] Eastlake, D., 3rd, Schiller, J., and S. Crocker,
             "Randomness Requirements for Security", BCP 106, RFC 4086,
             June 2005.

   [RFC4279] Eronen, P. and H. Tschofenig., "Pre-Shared Key Ciphersuites
             for Transport Layer Security (TLS)", RFC 4279, December 2006.

   [TLS]
             2005.

   [RFC4346] Dierks, T. and E. Rescorla, "The TLS Transport Layer Security
             (TLS) Protocol Version 1.1", RFC 4346, April 2005.

   [TLSEXT] 2006.

   [RFC4366] Blake-Wilson, S., et. al., Nystrom, M., Hopwood, D., Mikkelsen, J.,
             and T. Wright, "Transport Layer Security (TLS) Extensions",
             RFC 4346, 4366, April 2006.

   [TLSPSK]  Eronen, P., et. al., "Pre-Shared Key Ciphersuites for
             Transport Layer Security (TLS)", RFC 4279, December 2005.

   [RFC4642] Murchison, K., Vinocur, J., Newman, C., "Using Transport
             Layer Security (TLS) with Network News Transfer Protocol
             (NNTP)", RFC 4642, October 2006

   [PKICERT] Housley,

   [RFC4741] Enns, R., Polk, W., Ford, W., and D. Solo, "Internet
             X.509 Public Key Infrastructure Certificate and Certificate
             Revocation List (CRL) Profile", "NETCONF Configuration Protocol", RFC 3280, April 2002.

   [NETSSH] 4741,
             December 2006.

   [RFC4742] Wasserman, M. and T. Goddard, "Using the NETCONF
             Configuration Protocol over Secure Shell (SSH)", RFC 4742,
             December 2006.

   [NETNOT]  Chisholm, S. and H. Trevino, "NETCONF Event Notifications",
             draft-ietf-netconf-notification-11.txt, (work in progress),
             November 2007.

7.2. Informative References

   [TLSKERB] Medvinsky, A. and M. Hur, "Addition of Kerberos Cipher
             Suites to Transport Layer Security (TLS)", RFC 2712,
             October 1999.

Author's Addresses

   Mohamad Badra
   LIMOS Laboratory - UMR6158, CNRS
   France

   Email: badra@isima.fr

Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.