draft-ietf-adslmib-adslext-06.txt   draft-ietf-adslmib-adslext-07.txt 
INTERNET-DRAFT ADSL Line Extension MIB Faye Ly INTERNET-DRAFT ADSL Line Extension MIB Faye Ly
Copper Mountain Networks Salira Optical Systems
Gregory Bathrick Gregory Bathrick
Nokia Nokia
January 14, 2001 April 9, 2001
Definitions of Extension Managed Objects Definitions of Extension Managed Objects
for ADSL Lines for ADSL Lines
January 14, 2001 April 9, 2001
draft-ietf-adslmib-adslext-06.txt draft-ietf-adslmib-adslext-07.txt
1. Status of this Memo 1. Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as ``work in progress.'' material or to cite them other than as ``work in progress.''
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
To view the entire list of current Internet-Drafts, please check the To view the entire list of current Internet-Drafts, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern
Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific
Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast).
2. Abstract 2. Abstract
This document defines a standard SNMP MIB for additional functions This memo defines a portion of the Management Information Base (MIB)
not covered by the ADSL Line MIB [1]. for use with network management protocols in the Internet community.
In particular, it describes additional managed objects used for
managing ADSL interfaces not covered by the ADSL Line MIB [RFC2662].
3. The SNMP Network Management Framework 3. The SNMP Network Management Framework
The SNMP Management Framework presently consists of five major
components:
o An overall architecture, described in RFC 2571 [11].
o Mechanisms for describing and naming objects and events for the The SNMP Management Framework presently consists of five major
purpose of management. The first version of this Structure of components: An overall architecture, described in RFC 2571
Management Information (SMI) is called SMIv1 and described in [RFC2571]. Mechanisms for describing and naming objects and events
STD for the purpose of management. The first version of this Structure
16, RFC 1155 [14], STD 16, RFC 1212 [15] and RFC 1215 [16]. The of Management Information (SMI) is called SMIv1 and described in STD
second version, called SMIv2, is described in STD 58, RFC 2578 16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC 1215
[1], STD 58, RFC 2579 [2] and STD 58, RFC 2580 [17]. [RFC1215]. The second version, called SMIv2, is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
o Message protocols for transferring management information. [RFC2580]. Message protocols for transferring management
The first version of the SNMP message protocol is called information. The first version of the SNMP message protocol is
SNMPv1 and described in RFC 1157 [7]. A second version of called SNMPv1 and described in STD 15, RFC 1157 [RFC1157]. A second
the SNMP message protocol, which is not an Internet standards version of the SNMP message protocol, which is not an Internet
track protocol, is called SNMPv2c and described in RFC 1901 standards track protocol, is called SNMPv2c and described in RFC 1901
[18] and RFC 1906 [19]. The third version of the message [RFC1901] and RFC 1906 [RFC1906]. The third version of the message
protocol is called SNMPv3 and described in RFC 1906 [19], RFC protocol is called SNMPv3 and described in RFC 1906 [RFC1906], RFC
2272 [20] and RFC 2274 [21]. 2572 [RFC2572] and RFC 2574 [RFC2574]. Protocol operations for
accessing management information. The first set of protocol
o Protocol operations for accessing management information. operations and associated PDU formats is described in STD 15, RFC
The first set of protocol operations and associated PDU 1157 [RFC1157]. A second set of protocol operations and associated
formats is described in RFC 1157 [7]. A second set of PDU formats is described in RFC 1905 [RFC1905]. A set of fundamental
protocol operations and associated PDU formats is described applications described in RFC 2573 [RFC2573] and the view-based
in RFC 1905 [8]. access control mechanism described in RFC 2575 [RFC2575].
o A set of fundamental applications described in RFC 2273 [22] A more detailed introduction to the current SNMP Management Framework
and the view-based access control mechanism described in RFC can be found in RFC 2570 [RFC2570].
2275 [23].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are the Management Information Base or MIB. Objects in the MIB are
defined using the mechanisms defined in the SMI. defined using the mechanisms defined in the SMI.
This document specifies a MIB module that is compliant to the SMIv2. This memo specifies a MIB module that is compliant to the SMIv2. A
A MIB conforming to the SMIv1 can be produced through the appropriate MIB conforming to the SMIv1 can be produced through the appropriate
translations. The resulting translated MIB must be semantically translations. The resulting translated MIB must be semantically
equivalent, except where objects or events are omitted because no equivalent, except where objects or events are omitted because no
translation is possible (e.g., use of Counter64). Some machine translation is possible (use of Counter64). Some machine readable
readable information in SMIv2 will be converted into textual information in SMIv2 will be converted into textual descriptions in
descriptions in SMIv1 during the translation process. However, this SMIv1 during the translation process. However, this loss of machine
loss of machine readable information is not considered to change the readable information is not considered to change the semantics of the
semantics of the MIB. MIB.
4. Change Log
This section tracks changes made to the revisions of the Internet
Drafts of this document. It will be deleted when the document is
published as an RFC.
The following changes were made for the version of the document dated
May 10, 2000.
- Fixed the syntax AUGMENT for all tables.
- Corrected typos and added section 10, 11 and 12.
The following changes were made for the version of the document dated
May 10, 2000.
- Renamed adslLineTransAtucCapActual to adslLineTransAtucActual
The following changes were made for the version of the document dated
March 10, 2000.
- Added a new object in the adslLineExtTable describing the
G.lite power state.
The following changes were made for the version of the document dated
October 20, 1999.
- Changed adslLineExtTable to include config ATU-C, ATU-C and
ATU-R actual transmission capabilities.
- renamed adslProfileLineMode to adslProfileLineType to match
rfc2662 adslLineType object.
- Added two objects in the adslLineExtTable: one for
adslLineModeConfig and adslLineModeActual.
- Added a new textual convention for ADSL line mode.
- Corrected the MIB compiled errors and typos.
5. Introduction
The purpose of this memo is to define a supplemental set of 4. Introduction
managed objects that is not covered by ADSL Line MIB as defined in
[10]. This memo addresses the additional objects defined in ITU
G.997.1 [8]. These additional objects specifically address the
management capabilities of ADSL "Lite" as defined by ITU-T G.992.2
[9].
6. Relationship of the ADSL LINE EXTENSION MIB with standard MIBs The purpose of this memo is to define a supplemental set of managed
objects that is not covered by ADSL Line MIB as defined in [RFC2662].
This memo addresses the additional objects defined in ITU G.997.1.
These additional objects specifically address the management
5. Relationship of the ADSL LINE EXTENSION MIB with standard MIBs
This section outlines the relationship of ADSL Line Extension MIB This section outlines the relationship of ADSL Line Extension MIB
with other MIBs described in RFCs and in their various degrees of with other MIBs described in RFCs and in their various degrees
"standardization". ADSL Line Extension MIB obeys the same of "standardization". ADSL Line Extension MIB obeys the same
relationship between ADSL Line MIB to other standard MIBs with one relationship between ADSL Line MIB to other standard MIBs with
exception for the ifOperStatus as defined in RFC 1213 [3]. one exception for the ifOperStatus as defined in RFC 1213.
5.1 ifOperStatus
6.1 ifOperStatus
ifOperStatus is set to down(2) when the ADSL line interface is in ifOperStatus is set to down(2) when the ADSL line interface is in
power state L2, which means no power. ifOperStatus is set to up(1) power state L3, which means no power. ifOperStatus is set to up(1)
if the ADSL line interface is in power state L0 (power on) or L1 if the ADSL line interface is in power state L0 (power on)
(reduced power). or L1 (reduced power).
7. Conventions used in the MIB 6. Conventions used in the MIB
7.1 Structure 6.1 Structure
The MIB is organized to follow the same structure of the ADSL Line The MIB is organized to follow the same structure of the ADSL Line
MIB [1]. MIB [RFC2662].
7.2 Additional Managed Objects 6.2 Additional Managed Objects
A few objects are added to cover the ADSL "Lite" management and they A few objects are added to cover the ADSL "Lite" management and they are:
are:
- ATU-C Transmission System and Line Mode - ATU-C Transmission System and Line Mode
- Power Management - Power Management
- Counters for Fast Retrains and Failed Fast Retrains - Counters for Fast Retrains and Failed Fast Retrains
- Counters for Severe Error Second-line and Unavailable Second - Counters for Severe Error Second-line and Unavailable Second
- Alternative profile configuration for the Dual line mode - Alternative profile configuration for the Dual line mode interface
interface
Besides the management of ADSL "Lite", another object has been Besides the management of ADSL "Lite", another object has been added
added to the ADSL Line MIB [10] in order to manage the ADSL line to the ADSL Line MIB [RFC2662] in order to manage the ADSL line profile.
profile. The object is the line mode configuration. The object is the line mode configuration.
The MIB definitions are attached. The MIB will be branched from The MIB definitions are attached. The MIB will be branched from the
the ADSL Line MIB [10]. ADSL Line MIB [RFC2662].
7.2.1 ATU-C ADSL Transmission System Parameters and Line Mode 6.2.1 ATU-C ADSL Transmission System Parameters and Line Mode
The adslLineConfigTable needs to be extended to cover control of The adslLineConfigTable needs to be extended to cover control of the
the ATU-C ADSL Transmission system. Three objects are defined to ATU-C ADSL Transmission system. Three objects are defined to monitor
monitor and configure the transmission mode as well as the actual and configure the transmission mode as well as the actual line mode:
line mode:
- Capability - Capability
- Configuration - Configuration
- Actual Status - Actual Status
Transmission modes can further determine the line mode of the ADSL
interface. For example, if g9921PotsNonOverlapped(2) is the actual
value of the ADSL interface, the interface is operating in Full rate
ADSL. If the interface is set to g9922PotsOverlapped(9), the interface
is operating in G.lite mode.
Transmission modes can further determine the line mode of the The transmssion mode and the corresponding line mode are defined as:
ADSL interface. For example, if g9921PotsNonOverlapped(2) is the
actual value of the ADSL interface, the interface is operating in
Full rate ADSL. If the interface is set to g9922PotsOverlapped(9),
the interface is operating in G.lite mode.
The transmssion mode and the corresponding line mode are defined
as:
Transmission mode Line Mode Transmission mode Line Mode
---------------------------------------------------------- ----------------------------------------------------------
Regional Std. (ANSI T1.413) Full Regional Std. (ANSI T1.413) Full
Regional Std. (ETSI DTS/TM06006) Full Regional Std. (ETSI DTS/TM06006) Full
G.992.1 POTS non-overlapped Full G.992.1 POTS non-overlapped Full
G.992.1 POTS overlapped Full G.992.1 POTS overlapped Full
G.992.1 ISDN non-overlapped Full G.992.1 ISDN non-overlapped Full
G.992.1 ISDN overlapped Full G.992.1 ISDN overlapped Full
G.992.1 TCM-ISDN non-overlapped Full G.992.1 TCM-ISDN non-overlapped Full
G.992.1 TCM-ISDN overlapped Full G.992.1 TCM-ISDN overlapped Full
G.992.2 POTS non-overlapped Lite G.992.2 POTS non-overlapped Lite
G.992.2 POTS overlapped Lite G.992.2 POTS overlapped Lite
G.992.2 with TCM-ISDN non-overlapped Lite G.992.2 with TCM-ISDN non-overlapped Lite
G.992.2 with TCM-ISDN overlapped Lite G.992.2 with TCM-ISDN overlapped Lite
G.992.1 TCM-ISDN symmetric Full G.992.1 TCM-ISDN symmetric Full
Table 1: Transmission Mode and Line Mode Table 1: Transmission Mode and Line Mode
In case more than one bit is configured for an ADSL interface In case more than one bit is configured for an ADSL interface and
and both Full and Lite modes are selected, the interface is said to both Full and Lite modes are selected, the interface is said to
configure in the dual mode. Only one bit can be set in the Actual configure in the dual mode. Only one bit can be set in the Actual
object that reflects the actual mode of transmission as well as the object that reflects the actual mode of transmission as well as the
line mode. line mode.
7.2.2 Power Management 6.2.2 Power Management
There are three power states for each managed ADSL interface
operating in the G.lite mode. L0 is power on, L1 is power on but
reduced and L2 is power off. Power state cannot be configured by an
operator but it can be viewed via the ifOperStatus object for the
managed ADSL interface. The value of the object ifOperStatus is set
to down(2) if the ADSL interface is in power state L2 and is set to
up(1) if the ADSL line interface is in power state L0 or L1.
An ADSL line power state, if the interface is operating in the There are three power states for each managed ADSL interface operating
G.lite mode, can also be monitored by the adslLineGlitePowerState in the G.lite mode. L0 is power on, L1 is power on but reduced and L3
object defined in the ADSL Line Extension table. The value of the is power off. Power state cannot be configured by an operator but it
object enumerates the three power states attainable by the managed can be viewed via the ifOperStatus object for the managed ADSL interface.
interface. The value of the object ifOperStatus is set to down(2) if the ADSL
interface is in power state L3 and is set to up(1) if the ADSL line
interface is in power state L0 or L1.
7.2.3 Fast Retrain Parameters An ADSL line power state, if the interface is operating in the G.lite
mode, can also be monitored by the adslLineGlitePowerState object
defined in the ADSL Line Extension table. The value of the object
enumerates the three power states attainable by the managed interface.
Section 7.4.15 of ITU G.997.1 specifies fast retrain parameters. 6.2.3 Fast Retrain Parameters
Fast retrain parameters include two counters: fast retrain count and Section 7.4.15 of ITU G.997.1 specifies fast retrain parameters. Fast
failed fast retrain count. These two counters have been added to all retrain parameters include two counters: fast retrain count and failed
fast retrain count. These two counters have been added to all
performance tables. performance tables.
7.2.4 Counters for Severe Error Second-line and Unavailable Second 6.2.4 Counters for Severe Error Second-line and Unavailable Second
Section 7.2.1.1.7 and section 7.2.1.1.9 specify two counters Section 6.2.1.1.7 and section 6.2.1.1.9 specify two counters that are
that are not covered by the ADSL Line MIB [10]. These two counters not covered by the ADSL Line MIB [RFC2662]. These two counters
(severe error seconds-line and unavailable seconds) are added to all (severe error seconds-line and unavailable seconds) are added
the performance tables. to all the performance tables.
Unavailable seconds counts cumulative number of seconds in which Unavailable seconds counts cumulative number of seconds in which the
the interface was unavailable during the measured period. This interface was unavailable during the measured period. This counter
counter does not include the seconds in which unavailability was does not include the seconds in which unavailability was caused solely
caused solely by fast retrains and failed fast retrins. Fast by fast retrains and failed fast retrins. Fast retrains and failed
retrains and failed fast retrains are considered to be part of the fast retrains are considered to be part of the normal network operation
normal network operation and thus are not counted as unavailable and thus are not counted as unavailable errors.
errors.
7.2.5 Alternative profile configuration for the Dual line mode 6.2.5 Alternative profile configuration for the Dual line mode interface
interface
This object is used only when the interface (for the ADSL line This object is used only when the interface (for the ADSL line or
or channel) is configured as dual mode, that is, the object channel) is configured as dual mode, that is, the object
adslLineTransAtucConfig is configued with one or more full-rate modes adslLineTransAtucConfig is configued with one or more full-rate
and one or more Lite modes. modes and one or more Lite modes.
The object adslLineConfProfile defined in ADSL-MIB [10] is used The object adslLineConfProfile defined in ADSL-MIB [RFC2662] is used as
as the primary full-rate profile. The newly added object in this MIB the primary full-rate profile. The newly added object in this MIB
module, adslLineConfProfileDualLite is used to describe or configure module, adslLineConfProfileDualLite is used to describe or configure
the Lite profile. Note that if one or more full-rate modes are the Lite profile. Note that if one or more full-rate modes are
configured, or only lite modes are configured, only the original configured, or only lite modes are configured, only the original
full-rate profile is needed. The dual-mode profile object is only full-rate profile is needed. The dual-mode profile object is only
needed when both full-rate and lite profiles are needed. needed when both full-rate and lite profiles are needed.
If the static profile is used, the profile name is the ifIndex If the static profile is used, the profile name is the ifIndex ASCII
ASCII string plus the differentiator string appended to the end of string plus the differentiator string appended to the end of the
the static profile name. For example, for interface 100, the object static profile name. For example, for interface 100, the object
adslLineConfProfile is set by the agent to be "100Full" and the adslLineConfProfile is set by the agent to be "100Full" and the
object adslLineConfProfileDualLite is set to be "100Lite". object adslLineConfProfileDualLite is set to be "100Lite".
8. Conformance and Compliance 7. Conformance and Compliance
See the conformance and compliance statements within the information See the conformance and compliance statements within the information
module. module.
9. Definitions 8. Definitions
ADSL-LINE-EXT-MIB DEFINITIONS ::= BEGIN ADSL-LINE-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
Counter32, Counter32,
Unsigned32, Unsigned32,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
MODULE-IDENTITY, Gauge32, MODULE-IDENTITY, Gauge32,
OBJECT-TYPE, mib-2 FROM SNMPv2-SMI OBJECT-TYPE, mib-2 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC TEXTUAL-CONVENTION FROM SNMPv2-TC
PerfCurrentCount, PerfCurrentCount,
skipping to change at page 7, line 21 skipping to change at page 6, line 23
NOTIFICATION-GROUP FROM SNMPv2-CONF NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC TEXTUAL-CONVENTION FROM SNMPv2-TC
PerfCurrentCount, PerfCurrentCount,
PerfIntervalCount FROM PerfHist-TC-MIB PerfIntervalCount FROM PerfHist-TC-MIB
AdslPerfCurrDayCount, AdslPerfCurrDayCount,
AdslPerfPrevDayCount, AdslPerfPrevDayCount,
AdslPerfTimeElapsed, AdslPerfTimeElapsed,
AdslLineCodingType FROM ADSL-TC-MIB AdslLineCodingType FROM ADSL-TC-MIB
ifIndex FROM IF-MIB ifIndex FROM IF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB
adslLineConfProfileName, adslLineAlarmConfProfileEntry,
adslAtucIntervalNumber, adslLineConfProfileEntry,
adslAturIntervalNumber, adslAturIntervalEntry,
adslLineAlarmConfProfileName, adslAturPerfDataEntry,
adslAtucIntervalEntry,
adslAtucPerfDataEntry,
adslLineEntry,
adslMIB FROM ADSL-LINE-MIB adslMIB FROM ADSL-LINE-MIB
; ;
adslExtMIB MODULE-IDENTITY adslExtMIB MODULE-IDENTITY
LAST-UPDATED "0101141200Z" LAST-UPDATED "200104090000Z"
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
" "
Faye Ly Faye Ly
Copper Mountain Networks Salira Optical Systems
Norcal Office 2698 Orchard Parkway
2470 Embarcadero Way San Jose, CA 95134
Palo Alto, CA 94303 Tel: +1 408-382-0088
Tel: +1 650-687-3323 Fax: +1 408-382-1688
Fax: +1 650-687-3372 E-Mail: faye@salira.com
E-Mail: faye@coppermountain.com
Gregory Bathrick Gregory Bathrick
NOKIA High Speed Access Nodes NOKIA High Speed Access Nodes
1310 Redwood Way, 1310 Redwood Way,
Petaluma, CA 94954, USA Petaluma, CA 94954, USA
Tel: +1 707-793-7030 Tel: +1 707-793-7030
Fax: +1 707-792-0850 Fax: +1 707-792-0850
E-Mail: greg.bathrick@nokia.com" E-Mail: greg.bathrick@nokia.com
IETF ADSL MIB Working Group (XDSLMIB@LISTSERV.ECIRALEIGH.COM>
"
DESCRIPTION DESCRIPTION
"This MIB Module is a supplement to the ADSL-LINE-MIB [1]." "This MIB Module is a supplement to the ADSL-LINE-MIB
[RFC2662]."
::= { adslMIB 3 } ::= { adslMIB 3 }
adslExtMibObjects OBJECT IDENTIFIER ::= { adslExtMIB 1 } adslExtMibObjects OBJECT IDENTIFIER ::= { adslExtMIB 1 }
AdslTransmissionModeType ::= TEXTUAL-CONVENTION AdslTransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A set of ADSL line transmission modes, with one bit "A set of ADSL line transmission modes, with one bit
per mode. The notes (F) and (L) denote Full-Rate per mode. The notes (F) and (L) denote Full-Rate
and Lite respectively: and Lite respectively:
skipping to change at page 9, line 4 skipping to change at page 8, line 12
q9922tcmIsdnOverlapped(11), q9922tcmIsdnOverlapped(11),
q9921tcmIsdnSymmetric(12) q9921tcmIsdnSymmetric(12)
} }
adslLineExtTable OBJECT-TYPE adslLineExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslLineExtEntry SYNTAX SEQUENCE OF AdslLineExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL line configuration and "This table contains ADSL line configuration and
monitoring monitoring information not defined in the
information not defined in the adslLineTable from adslLineTable from the ADSL-LINE-MIB [RFC2662].
the This includes the capabilities and actual ADSL
ADSL-LINE-MIB [1]. This includes the capabilities transmission system."
and
actual ADSL transmission system."
::= { adslExtMibObjects 17 } ::= { adslExtMibObjects 17 }
adslLineExtEntry OBJECT-TYPE adslLineExtEntry OBJECT-TYPE
SYNTAX AdslLineExtEntry SYNTAX AdslLineExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineEntry defined in [1]. "An entry extends the adslLineEntry defined in
Each [RFC2662]. Each entry corresponds to an ADSL
entry corresponds to an ADSL line." line."
INDEX { ifIndex } AUGMENTS { adslLineEntry }
::= { adslLineExtTable 1 } ::= { adslLineExtTable 1 }
AdslLineExtEntry ::= AdslLineExtEntry ::=
SEQUENCE { SEQUENCE {
adslLineTransAtucCap AdslTransmissionModeType, adslLineTransAtucCap AdslTransmissionModeType,
adslLineTransAtucConfig AdslTransmissionModeType, adslLineTransAtucConfig AdslTransmissionModeType,
adslLineTransAtucActual AdslTransmissionModeType, adslLineTransAtucActual AdslTransmissionModeType,
adslLineGlitePowerState INTEGER, adslLineGlitePowerState INTEGER,
adslLineConfProfileDualLite SnmpAdminString adslLineConfProfileDualLite SnmpAdminString
} }
adslLineTransAtucCap OBJECT-TYPE adslLineTransAtucCap OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The transmission modes that the ATU-C is capable "The transmission modes that the ATU-C is capable
of supporting. The modes available are limited of supporting. The modes available are limited
by the design of the equipment." by the design of the equipment."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1"
::= { adslLineExtEntry 1 } ::= { adslLineExtEntry 1 }
adslLineTransAtucConfig OBJECT-TYPE adslLineTransAtucConfig OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The transmission modes that the ATU-C must enable "The transmission modes that the ATU-C must enable
for the line. The ATU-C's enable modes must be for the line. The ATU-C's enable modes must be
a subset of its capable modes." a subset of its capable modes."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1"
::= { adslLineExtEntry 2 } ::= { adslLineExtEntry 2 }
adslLineTransAtucActual OBJECT-TYPE adslLineTransAtucActual OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The transmission mode of the ATU-C. This object "The transmission mode of the ATU-C. This object
returns 0 (i.e BITS with no mode bit set) if there returns 0 (i.e BITS with no mode bit set) if there
is no mode currently known. The initialization is no mode currently known. The initialization
with the ATU-R will determine the mode used with the ATU-R will determine the mode used
and the result must be a one-mode subset of the and the result must be a one-mode subset of the
'Enable' modes. After an initialization has 'Enable' modes. After an initialization has
occurred, occurred, its mode is saved as the 'Current' mode
its mode is saved as the 'Current' mode and it and it should persist even if the link goes down
should persist even if the link goes down
subsequently. This leaves a hint on what may be subsequently. This leaves a hint on what may be
used next time." used next time."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1 "
::= { adslLineExtEntry 3 } ::= { adslLineExtEntry 3 }
adslLineGlitePowerState OBJECT-TYPE adslLineGlitePowerState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
none(1), none(1),
l0(2), -- L0 Power on l0(2), -- L0 Power on
l1(3), -- L1 Power on but reduced l1(3), -- L1 Power on but reduced
l2(4) -- L2 Power off l3(4) -- L3 Power off
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object specifies the power state "The value of this object specifies the power state
this interface is in. If the object this interface is in. If the object adslLineModeActual
adslLineModeActual is set to glite, the value of this object can be either
is set to glite, the value of this object can be one of the power state from L0 to L3. If the object
either adslLineTransAtucActual is set to other than G.lite,
one of the power state from L0 to L2. If the
object
adslLineTransAtucActual is set to other than
G.lite,
the value of this object is always set to none(1)." the value of this object is always set to none(1)."
::= { adslLineExtEntry 4 } ::= { adslLineExtEntry 4 }
adslLineConfProfileDualLite OBJECT-TYPE adslLineConfProfileDualLite OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row "The value of this object identifies the row
in the ADSL Line Configuration Profile Table, in the ADSL Line Configuration Profile Table,
(adslLineConfProfileTable), which applies for this (adslLineConfProfileTable), which applies for this
ADSL line, and channels if applicable, when the mode ADSL line, and channels if applicable, when the
after initialization is any G.992.2 (G.lite) mode mode after initialization is any G.992.2 (G.lite)
AND adslLineTransAtucConfig has enabled dual-mode. mode AND adslLineTransAtucConfig has enabled
Dual-mode in this case means one or more Full-Rate dual-mode. Dual-mode in this case means one or more
modes AND one or more Lite modes enabled. Full-Rate modes AND one or more Lite modes enabled.
If dual-mode has not been enabled by this MIB or if If dual-mode has not been enabled by this MIB or if
the ATU-C does not support this extension MIB, then the ATU-C does not support this extension MIB, then
the previously existing adslLineConfProfile is used the previously existing adslLineConfProfile is used
even if the ATU-C mode is one of the G.992.2 modes." even if the ATU-C mode is one of the G.992.2 modes."
::= { adslLineExtEntry 5 } ::= { adslLineExtEntry 5 }
adslAtucPerfDataExtTable OBJECT-TYPE adslAtucPerfDataExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAtucPerfDataExtEntry SYNTAX SEQUENCE OF AdslAtucPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL physical line counters "This table contains ADSL physical line counters
information not defined in the adslAtucPerfDataTable from the ADSL- information not defined in the adslAtucPerfDataTable
LINE-MIB [10]." from the ADSL-LINE-MIB [RFC2662]."
::= { adslExtMibObjects 18 } ::= { adslExtMibObjects 18 }
adslAtucPerfDataExtEntry OBJECT-TYPE adslAtucPerfDataExtEntry OBJECT-TYPE
SYNTAX AdslAtucPerfDataExtEntry SYNTAX AdslAtucPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslAtucPerfDataEntry defined "An entry extends the adslAtucPerfDataEntry defined
in [10]. Each entry corresponds to an ADSL line." in [RFC2662]. Each entry corresponds to an ADSL line."
INDEX { ifIndex } AUGMENTS { adslAtucPerfDataEntry }
::= { adslAtucPerfDataExtTable 1 } ::= { adslAtucPerfDataExtTable 1 }
AdslAtucPerfDataExtEntry ::= AdslAtucPerfDataExtEntry ::=
SEQUENCE { SEQUENCE {
adslAtucPerfStatFastR Counter32, adslAtucPerfStatFastR Counter32,
adslAtucPerfStatFailedFastR Counter32, adslAtucPerfStatFailedFastR Counter32,
adslAtucPerfStatSesL Counter32, adslAtucPerfStatSesL Counter32,
adslAtucPerfStatUasL Counter32, adslAtucPerfStatUasL Counter32,
adslAtucPerfCurr15MinFastR PerfCurrentCount, adslAtucPerfCurr15MinFastR PerfCurrentCount,
adslAtucPerfCurr15MinFailedFastR PerfCurrentCount, adslAtucPerfCurr15MinFailedFastR PerfCurrentCount,
skipping to change at page 12, line 18 skipping to change at page 11, line 19
adslAtucPerfPrev1DayUasL AdslPerfPrevDayCount adslAtucPerfPrev1DayUasL AdslPerfPrevDayCount
} }
adslAtucPerfStatFastR OBJECT-TYPE adslAtucPerfStatFastR OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
fast retrains." fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 "
::= { adslAtucPerfDataExtEntry 1 } ::= { adslAtucPerfDataExtEntry 1 }
adslAtucPerfStatFailedFastR OBJECT-TYPE adslAtucPerfStatFailedFastR OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
failed fast retrains." failed fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 "
::= { adslAtucPerfDataExtEntry 2 } ::= { adslAtucPerfDataExtEntry 2 }
adslAtucPerfStatSesL OBJECT-TYPE adslAtucPerfStatSesL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
severely errored second-line." severely errored second-line."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
::= { adslAtucPerfDataExtEntry 3 } ::= { adslAtucPerfDataExtEntry 3 }
adslAtucPerfStatUasL OBJECT-TYPE adslAtucPerfStatUasL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
unavailable second." unavailable second."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
::= { adslAtucPerfDataExtEntry 4 } ::= { adslAtucPerfDataExtEntry 4 }
adslAtucPerfCurr15MinFastR OBJECT-TYPE adslAtucPerfCurr15MinFastR OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was fast retrains." when there was fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 "
::= { adslAtucPerfDataExtEntry 5 } ::= { adslAtucPerfDataExtEntry 5 }
adslAtucPerfCurr15MinFailedFastR OBJECT-TYPE adslAtucPerfCurr15MinFailedFastR OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was failed fast retrains." when there was failed fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 "
::= { adslAtucPerfDataExtEntry 6 } ::= { adslAtucPerfDataExtEntry 6 }
adslAtucPerfCurr15MinSesL OBJECT-TYPE adslAtucPerfCurr15MinSesL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was fast retrains." when there was fast retrains."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
::= { adslAtucPerfDataExtEntry 7 } ::= { adslAtucPerfDataExtEntry 7 }
adslAtucPerfCurr15MinUasL OBJECT-TYPE adslAtucPerfCurr15MinUasL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was count for unavailable errored when there was count for unavailable errored seconds."
seconds." REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataExtEntry 8 } ::= { adslAtucPerfDataExtEntry 8 }
adslAtucPerfCurr1DayFastR OBJECT-TYPE adslAtucPerfCurr1DayFastR OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was fast "Count of the number of seconds when there was fast
retrains during the current day as measured by retrains during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 "
::= { adslAtucPerfDataExtEntry 9 } ::= { adslAtucPerfDataExtEntry 9 }
adslAtucPerfCurr1DayFailedFastR OBJECT-TYPE adslAtucPerfCurr1DayFailedFastR OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was failed
failed
fast retrains during the current day as measured by fast retrains during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 "
::= { adslAtucPerfDataExtEntry 10 } ::= { adslAtucPerfDataExtEntry 10 }
adslAtucPerfCurr1DaySesL OBJECT-TYPE adslAtucPerfCurr1DaySesL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was Severe
Severe Errored Seconds during the current day as measured by
Errored Seconds during the current day as measured
by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
::= { adslAtucPerfDataExtEntry 11 } ::= { adslAtucPerfDataExtEntry 11 }
adslAtucPerfCurr1DayUasL OBJECT-TYPE adslAtucPerfCurr1DayUasL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Unavailable Unavailable Errored Seconds during the current
Errored Seconds during the current day as measured day as measured by adslAtucPerfCurr1DayTimeElapsed."
by REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataExtEntry 12 } ::= { adslAtucPerfDataExtEntry 12 }
adslAtucPerfPrev1DayFastR OBJECT-TYPE adslAtucPerfPrev1DayFastR OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
fast retrains within the most recent previous fast retrains within the most recent previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 "
::= { adslAtucPerfDataExtEntry 13 } ::= { adslAtucPerfDataExtEntry 13 }
adslAtucPerfPrev1DayFailedFastR OBJECT-TYPE adslAtucPerfPrev1DayFailedFastR OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
failed fast retrains within the most recent previous failed fast retrains within the most recent previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 "
::= { adslAtucPerfDataExtEntry 14 } ::= { adslAtucPerfDataExtEntry 14 }
adslAtucPerfPrev1DaySesL OBJECT-TYPE adslAtucPerfPrev1DaySesL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
severed errored seconds within the most recent severed errored seconds within the most recent previous
previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
::= { adslAtucPerfDataExtEntry 15 } ::= { adslAtucPerfDataExtEntry 15 }
adslAtucPerfPrev1DayUasL OBJECT-TYPE adslAtucPerfPrev1DayUasL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unavailable errored seconds within the most recent unavailable errored seconds within the most recent
previous previous 1-day period."
1-day period." REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataExtEntry 16 } ::= { adslAtucPerfDataExtEntry 16 }
adslAtucIntervalExtTable OBJECT-TYPE adslAtucIntervalExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAtucIntervalExtEntry SYNTAX SEQUENCE OF AdslAtucIntervalExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides one row for each ATUC "This table provides one row for each ATUC
performance data collection interval. performance data collection interval.
ADSL physical interfaces are ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)." those ifEntries where ifType is equal to adsl(94)."
::= { adslExtMibObjects 19 } ::= { adslExtMibObjects 19 }
adslAtucIntervalExtEntry OBJECT-TYPE adslAtucIntervalExtEntry OBJECT-TYPE
SYNTAX AdslAtucIntervalExtEntry SYNTAX AdslAtucIntervalExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION "An entry in the DESCRIPTION "An entry in the adslAtucIntervalExtTable."
adslAtucIntervalExtTable." AUGMENTS { adslAtucIntervalEntry }
INDEX { ifIndex, adslAtucIntervalNumber }
::= { adslAtucIntervalExtTable 1 } ::= { adslAtucIntervalExtTable 1 }
AdslAtucIntervalExtEntry ::= AdslAtucIntervalExtEntry ::=
SEQUENCE { SEQUENCE {
adslAtucIntervalFastR PerfIntervalCount, adslAtucIntervalFastR PerfIntervalCount,
adslAtucIntervalFailedFastR PerfIntervalCount, adslAtucIntervalFailedFastR PerfIntervalCount,
adslAtucIntervalSesL PerfIntervalCount, adslAtucIntervalSesL PerfIntervalCount,
adslAtucIntervalUasL PerfIntervalCount adslAtucIntervalUasL PerfIntervalCount
} }
adslAtucIntervalFastR OBJECT-TYPE adslAtucIntervalFastR OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was Fast
Fast
Retrains." Retrains."
::= { adslAtucIntervalExtEntry 1 } ::= { adslAtucIntervalExtEntry 1 }
adslAtucIntervalFailedFastR OBJECT-TYPE adslAtucIntervalFailedFastR OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was Failed
Failed
Fast Retrains." Fast Retrains."
::= { adslAtucIntervalExtEntry 2 } ::= { adslAtucIntervalExtEntry 2 }
adslAtucIntervalSesL OBJECT-TYPE adslAtucIntervalSesL OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
skipping to change at page 17, line 36 skipping to change at page 16, line 27
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unavailable errors." unavailable errors."
::= { adslAtucIntervalExtEntry 4 } ::= { adslAtucIntervalExtEntry 4 }
adslAturPerfDataExtTable OBJECT-TYPE adslAturPerfDataExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAturPerfDataExtEntry SYNTAX SEQUENCE OF AdslAturPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL physical line counters "This table contains ADSL physical line counters
information not defined in the adslAturPerfDataTable from the ADSL- information not defined in the adslAturPerfDataTable
LINE-MIB [10]." from the ADSL-LINE-MIB [RFC2662]."
::= { adslExtMibObjects 20 } ::= { adslExtMibObjects 20 }
adslAturPerfDataExtEntry OBJECT-TYPE adslAturPerfDataExtEntry OBJECT-TYPE
SYNTAX AdslAturPerfDataExtEntry SYNTAX AdslAturPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslAturPerfDataEntry defined "An entry extends the adslAturPerfDataEntry defined
in [10]. Each entry corresponds to an ADSL line." in [RFC2662]. Each entry corresponds to an ADSL line."
INDEX { ifIndex } AUGMENTS { adslAturPerfDataEntry }
::= { adslAturPerfDataExtTable 1 } ::= { adslAturPerfDataExtTable 1 }
AdslAturPerfDataExtEntry ::= AdslAturPerfDataExtEntry ::=
SEQUENCE { SEQUENCE {
adslAturPerfStatSesL Counter32, adslAturPerfStatSesL Counter32,
adslAturPerfStatUasL Counter32, adslAturPerfStatUasL Counter32,
adslAturPerfCurr15MinSesL PerfCurrentCount, adslAturPerfCurr15MinSesL PerfCurrentCount,
adslAturPerfCurr15MinUasL PerfCurrentCount, adslAturPerfCurr15MinUasL PerfCurrentCount,
adslAturPerfCurr1DaySesL AdslPerfCurrDayCount, adslAturPerfCurr1DaySesL AdslPerfCurrDayCount,
adslAturPerfCurr1DayUasL AdslPerfCurrDayCount, adslAturPerfCurr1DayUasL AdslPerfCurrDayCount,
skipping to change at page 18, line 13 skipping to change at page 17, line 4
SEQUENCE { SEQUENCE {
adslAturPerfStatSesL Counter32, adslAturPerfStatSesL Counter32,
adslAturPerfStatUasL Counter32, adslAturPerfStatUasL Counter32,
adslAturPerfCurr15MinSesL PerfCurrentCount, adslAturPerfCurr15MinSesL PerfCurrentCount,
adslAturPerfCurr15MinUasL PerfCurrentCount, adslAturPerfCurr15MinUasL PerfCurrentCount,
adslAturPerfCurr1DaySesL AdslPerfCurrDayCount, adslAturPerfCurr1DaySesL AdslPerfCurrDayCount,
adslAturPerfCurr1DayUasL AdslPerfCurrDayCount, adslAturPerfCurr1DayUasL AdslPerfCurrDayCount,
adslAturPerfPrev1DaySesL AdslPerfPrevDayCount, adslAturPerfPrev1DaySesL AdslPerfPrevDayCount,
adslAturPerfPrev1DayUasL AdslPerfPrevDayCount adslAturPerfPrev1DayUasL AdslPerfPrevDayCount
} }
adslAturPerfStatSesL OBJECT-TYPE adslAturPerfStatSesL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
severely errored second-line." severely errored second-line."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
::= { adslAturPerfDataExtEntry 1 } ::= { adslAturPerfDataExtEntry 1 }
adslAturPerfStatUasL OBJECT-TYPE adslAturPerfStatUasL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
unavailable second." unavailable second."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
::= { adslAturPerfDataExtEntry 2 } ::= { adslAturPerfDataExtEntry 2 }
adslAturPerfCurr15MinSesL OBJECT-TYPE adslAturPerfCurr15MinSesL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was Severe Errored Seconds-Line." when there was Severe Errored Seconds-Line."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
::= { adslAturPerfDataExtEntry 3 } ::= { adslAturPerfDataExtEntry 3 }
adslAturPerfCurr15MinUasL OBJECT-TYPE adslAturPerfCurr15MinUasL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was Unavailable Errored Seconds." when there was Unavailable Errored Seconds."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
::= { adslAturPerfDataExtEntry 4 } ::= { adslAturPerfDataExtEntry 4 }
adslAturPerfCurr1DaySesL OBJECT-TYPE adslAturPerfCurr1DaySesL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was Severe
Severe Errored Seconds during the current day as measured by
Errored Seconds during the current day as measured
by
adslAturPerfCurr1DayTimeElapsed." adslAturPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
::= { adslAturPerfDataExtEntry 5 } ::= { adslAturPerfDataExtEntry 5 }
adslAturPerfCurr1DayUasL OBJECT-TYPE adslAturPerfCurr1DayUasL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Unavailable Unavailable Errored Seconds during the current
Errored Seconds during the current day as measured day as measured by adslAturPerfCurr1DayTimeElapsed."
by REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
adslAturPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataExtEntry 6 } ::= { adslAturPerfDataExtEntry 6 }
adslAturPerfPrev1DaySesL OBJECT-TYPE adslAturPerfPrev1DaySesL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
severed errored second within the most recent severed errored second within the most recent previous
previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
::= { adslAturPerfDataExtEntry 7 } ::= { adslAturPerfDataExtEntry 7 }
adslAturPerfPrev1DayUasL OBJECT-TYPE adslAturPerfPrev1DayUasL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unavailable errored second within the most recent unavailable errored second within the most recent
previous previous 1-day period."
1-day period." REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataExtEntry 8 } ::= { adslAturPerfDataExtEntry 8 }
adslAturIntervalExtTable OBJECT-TYPE adslAturIntervalExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAturIntervalExtEntry SYNTAX SEQUENCE OF AdslAturIntervalExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides one row for each ATUC "This table provides one row for each ATUC
performance data collection interval. performance data collection interval.
ADSL physical interfaces are ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)." those ifEntries where ifType is equal to adsl(94)."
::= { adslExtMibObjects 21 } ::= { adslExtMibObjects 21 }
adslAturIntervalExtEntry OBJECT-TYPE adslAturIntervalExtEntry OBJECT-TYPE
SYNTAX AdslAturIntervalExtEntry SYNTAX AdslAturIntervalExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION "An entry in the DESCRIPTION "An entry in the adslAturIntervalExtTable."
adslAturIntervalExtTable." AUGMENTS { adslAturIntervalEntry }
INDEX { ifIndex, adslAturIntervalNumber }
::= { adslAturIntervalExtTable 1 } ::= { adslAturIntervalExtTable 1 }
AdslAturIntervalExtEntry ::= AdslAturIntervalExtEntry ::=
SEQUENCE { SEQUENCE {
adslAturIntervalSesL PerfIntervalCount, adslAturIntervalSesL PerfIntervalCount,
adslAturIntervalUasL PerfIntervalCount adslAturIntervalUasL PerfIntervalCount
} }
adslAturIntervalSesL OBJECT-TYPE adslAturIntervalSesL OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
skipping to change at page 21, line 20 skipping to change at page 20, line 4
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unavailable errors." unavailable errors."
::= { adslAturIntervalExtEntry 2 } ::= { adslAturIntervalExtEntry 2 }
adslConfProfileExtTable OBJECT-TYPE adslConfProfileExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslConfProfileExtEntry SYNTAX SEQUENCE OF AdslConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL line profile configuration "This table contains ADSL line profile configuration
information not defined in the information not defined in the adslLineConfProfileTable
adslLineConfProfileTable from the ADSL-LINE-MIB [RFC2662]. This includes the line
from the ADSL-LINE-MIB [1]. This includes the line
mode." mode."
::= { adslExtMibObjects 22 } ::= { adslExtMibObjects 22 }
adslConfProfileExtEntry OBJECT-TYPE adslConfProfileExtEntry OBJECT-TYPE
SYNTAX AdslConfProfileExtEntry SYNTAX AdslConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineConfProfileEntry "An entry extends the adslLineConfProfileEntry defined
defined in [1]. in [RFC2662]. Each entry corresponds to an ADSL line
Each entry corresponds to an ADSL line profile." profile."
INDEX { IMPLIED adslLineConfProfileName} AUGMENTS { adslLineConfProfileEntry }
::= { adslConfProfileExtTable 1 } ::= { adslConfProfileExtTable 1 }
AdslConfProfileExtEntry ::= AdslConfProfileExtEntry ::=
SEQUENCE { SEQUENCE {
adslConfProfileLineType INTEGER adslConfProfileLineType INTEGER
} }
adslConfProfileLineType OBJECT-TYPE adslConfProfileLineType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
noChannel (1), -- no channels exist noChannel (1), -- no channels exist
skipping to change at page 22, line 10 skipping to change at page 20, line 41
fastOrInterleaved (4),-- either fast or interleaved fastOrInterleaved (4),-- either fast or interleaved
-- channels can exist, but -- channels can exist, but
-- only one at any time -- only one at any time
fastAndInterleaved (5)-- both fast or interleaved fastAndInterleaved (5)-- both fast or interleaved
-- channels exist -- channels exist
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" "
This object is used to configure the ADSL physical This object is used to configure the ADSL physical line
line
mode. " mode. "
::= { adslConfProfileExtEntry 1 } ::= { adslConfProfileExtEntry 1 }
adslAlarmConfProfileExtTable OBJECT-TYPE adslAlarmConfProfileExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAlarmConfProfileExtEntry SYNTAX SEQUENCE OF AdslAlarmConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table extends the "This table extends the adslLineAlarmConfProfileTable
adslLineAlarmConfProfileTable and and provides threshold parameters for all the counters
provides threshold parameters for all the counters defined in this MIB module."
defined
in this MIB module."
::= { adslExtMibObjects 23 } ::= { adslExtMibObjects 23 }
adslAlarmConfProfileExtEntry OBJECT-TYPE adslAlarmConfProfileExtEntry OBJECT-TYPE
SYNTAX AdslAlarmConfProfileExtEntry SYNTAX AdslAlarmConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineAlarmConfProfileTable "An entry extends the adslLineAlarmConfProfileTable
defined in [10]. Each entry corresponds to an ADSL alarm profile." defined in [RFC2662]. Each entry corresponds to
INDEX { IMPLIED adslLineAlarmConfProfileName} an ADSL alarm profile."
AUGMENTS { adslLineAlarmConfProfileEntry }
::= { adslAlarmConfProfileExtTable 1 } ::= { adslAlarmConfProfileExtTable 1 }
AdslAlarmConfProfileExtEntry ::= AdslAlarmConfProfileExtEntry ::=
SEQUENCE { SEQUENCE {
adslAtucThreshold15MinFailedFastR Unsigned32, adslAtucThreshold15MinFailedFastR Unsigned32,
adslAtucThreshold15MinSesL Unsigned32, adslAtucThreshold15MinSesL Unsigned32,
adslAtucThreshold15MinUasL Unsigned32 adslAtucThreshold15MinUasL Unsigned32
} }
adslAtucThreshold15MinFailedFastR OBJECT-TYPE adslAtucThreshold15MinFailedFastR OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of failed retrains encountered by an "The number of failed retrains encountered by an
ADSL interface within any giving 15 minutes ADSL interface within any giving 15 minutes performance
performance
data collection period, which cause the SNMP agent data collection period, which cause the SNMP agent
to send an adslAtucFailedFastRTrap. One trap will to send an adslAtucFailedFastRTrap. One trap will be
be
sent per interval per interface. A value '0' will sent per interval per interface. A value '0' will
disable the trap." disable the trap."
::= { adslAlarmConfProfileExtEntry 1 } ::= { adslAlarmConfProfileExtEntry 1 }
adslAtucThreshold15MinSesL OBJECT-TYPE adslAtucThreshold15MinSesL OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Severe errored seconds encountered by "The number of Severe errored seconds encountered by an
an ADSL interface withing any giving 15 minutes performance
ADSL interface withing any giving 15 minutes
performance
data collection period, which cause the SNMP agent data collection period, which cause the SNMP agent
to send an adslAtucSesLTrap. One trap will be to send an adslAtucSesLTrap. One trap will be
sent per interval per interface. A value '0' will sent per interval per interface. A value '0' will
disable the trap." disable the trap."
::= { adslAlarmConfProfileExtEntry 2 } ::= { adslAlarmConfProfileExtEntry 2 }
adslAtucThreshold15MinUasL OBJECT-TYPE adslAtucThreshold15MinUasL OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unavailable errored seconds "The number of unavailable errored seconds encountered
encountered by an by an ADSL interface withing any giving 15 minutes
ADSL interface withing any giving 15 minutes performance data collection period, which cause the
performance SNMP agent to send an adslAtucUasLThreshTrap.
data collection period, which cause the SNMP agent One trap will be sent per interval per interface.
to send an adslAtucUasLThreshTrap. One trap will A value '0' will disable the trap."
be
sent per interval per interface. A value '0' will
disable the trap."
::= { adslAlarmConfProfileExtEntry 3 } ::= { adslAlarmConfProfileExtEntry 3 }
-- trap definitions -- trap definitions
adslExtTraps OBJECT IDENTIFIER ::= { adslExtMibObjects 24 } adslExtTraps OBJECT IDENTIFIER ::= { adslExtMibObjects 24 }
adslExtAtucTraps OBJECT IDENTIFIER ::= { adslExtTraps 1 } adslExtAtucTraps OBJECT IDENTIFIER ::= { adslExtTraps 1 }
adslAtucFailedFastRThreshTrap NOTIFICATION-TYPE adslAtucFailedFastRThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15MinFailedFastR } OBJECTS { adslAtucPerfCurr15MinFailedFastR }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Failed Fast Retrains 15 minutes threshold reached." "Failed Fast Retrains 15 minutes threshold reached."
::= { adslExtAtucTraps 0 1 } ::= { adslExtAtucTraps 0 1 }
adslAtucSesLThreshTrap NOTIFICATION-TYPE adslAtucSesLThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15MinSesL } OBJECTS { adslAtucPerfCurr15MinSesL }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Severe errored seconds 15 minutes threshold "Severe errored seconds 15 minutes threshold reached."
reached."
::= { adslExtAtucTraps 0 2 } ::= { adslExtAtucTraps 0 2 }
adslAtucUasLThreshTrap NOTIFICATION-TYPE adslAtucUasLThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15MinUasL } OBJECTS { adslAtucPerfCurr15MinUasL }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Unavailable seconds 15 minutes threshold reached." "Unavailable seconds 15 minutes threshold reached."
::= { adslExtAtucTraps 0 3 } ::= { adslExtAtucTraps 0 3 }
-- conformance information -- conformance information
skipping to change at page 26, line 4 skipping to change at page 24, line 24
adslLineTransAtucCap, adslLineTransAtucCap,
adslLineTransAtucConfig, adslLineTransAtucConfig,
adslLineTransAtucActual, adslLineTransAtucActual,
adslLineGlitePowerState adslLineGlitePowerState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing configuration "A collection of objects providing configuration
information about an ADSL Line." information about an ADSL Line."
::= { adslExtGroups 1 } ::= { adslExtGroups 1 }
adslExtAtucPhysPerfRawCounterGroup OBJECT-GROUP adslExtAtucPhysPerfRawCounterGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslAtucPerfStatFastR, adslAtucPerfStatFailedFastR, adslAtucPerfStatFastR,
adslAtucPerfStatFailedFastR,
adslAtucPerfCurr15MinFastR, adslAtucPerfCurr15MinFastR,
adslAtucPerfCurr15MinFailedFastR, adslAtucPerfCurr15MinFailedFastR,
adslAtucPerfCurr1DayFastR, adslAtucPerfCurr1DayFastR,
adslAtucPerfCurr1DayFailedFastR, adslAtucPerfCurr1DayFailedFastR,
adslAtucPerfPrev1DayFastR, adslAtucPerfPrev1DayFastR,
adslAtucPerfPrev1DayFailedFastR, adslAtucPerfPrev1DayFailedFastR,
adslAtucPerfStatSesL, adslAtucPerfStatUasL, adslAtucPerfStatSesL,
adslAtucPerfStatUasL,
adslAtucPerfCurr15MinSesL, adslAtucPerfCurr15MinSesL,
adslAtucPerfCurr15MinUasL, adslAtucPerfCurr15MinUasL,
adslAtucPerfCurr1DaySesL, adslAtucPerfCurr1DayUasL, adslAtucPerfCurr1DaySesL,
adslAtucPerfPrev1DaySesL, adslAtucPerfPrev1DayUasL, adslAtucPerfCurr1DayUasL,
adslAtucIntervalFastR, adslAtucIntervalFailedFastR, adslAtucPerfPrev1DaySesL,
adslAtucIntervalSesL, adslAtucIntervalUasL adslAtucPerfPrev1DayUasL,
adslAtucIntervalFastR,
adslAtucIntervalFailedFastR,
adslAtucIntervalSesL,
adslAtucIntervalUasL
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing raw performance "A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end)." counts on an ADSL Line (ATU-C end)."
::= { adslExtGroups 2 } ::= { adslExtGroups 2 }
adslExtAturPhysPerfRawCounterGroup OBJECT-GROUP adslExtAturPhysPerfRawCounterGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslAturPerfStatSesL, adslAturPerfStatSesL,
skipping to change at page 27, line 38 skipping to change at page 26, line 17
::= { adslExtGroups 6 } ::= { adslExtGroups 6 }
END END
9. Acknowledgments 9. Acknowledgments
This document is a product of the ADSL MIB Working Group. This document is a product of the ADSL MIB Working Group.
10. References 10. References
[1] B. Wijnen, D. Harrington, R. Presuhn, "Structure of [RFC2571] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture
Management Information Version 2 (SMIv2)" RFC 2578, for Describing SNMP Management Frameworks", RFC 2571, April
April 1999. 1999.
[2] K. McCloghrie, D. Perkins, J. Schoenwaelder,
"Textual Conventions for SMIv2", RFC 2579, April 1999.
[3] McCloghrie, K., and M. Rose, Editors, "Management
Information Base for Network Management of TCP/IP-based
internets: MIB-II", STD 17, RFC 1213, Hughes LAN Systems,
Performance Systems International, March 1991.
[4] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB using SMIv2", RFC 2233, Cisco Systems, FTP Software,
November 1997.
[5] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M.,
and S. Waldbusser, "Management Information Base for
version 2 of the Simple Network Management Protocol
(SNMPv2)", RFC 1907, January 1996.
[6] Case, J., Fedor, M., Schoffstall, M., and J. Davin. " A
Simple
Network Management Protocol (SNMP)", STD 15, RFC 1157, SNMP
Research, Performance Systems International, MIT Lab for
Computer Science, May 1990.
[7] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Protocol Operations for Version 2 of the
Simple
Network Management Protocol (SNMPv2)", RFC 1905, January
1996.
[8] ITU Draft Recommendation G.997.1 "Physical Layer Management
for
Digital Subscriber Line (DSL) Transceivers.", January 1999
[9] Chris Hansen, ITU "White Paper submission of Recommendation [RFC1155] Rose, M., and K. McCloghrie, "Structure and Identification
G.992.2" of Management Information for TCP/IP-based Internets", STD
June/July 1999. 16, RFC 1155, May 1990.
[10] G. Bathrick, F. Ly "Definitions of Managed Objects for the [RFC1155] Rose, M., and K. McCloghrie, "Structure and Identification
ADSL of Management Information for TCP/IP-based Internets", STD
Lines", May 14, 1999. 16, RFC 1155, May 1990.
[11] D. Harrington, R. Presuhn, B. Wijnen, "An architecture for [RFC1215] M. Rose, "A Convention for Defining Traps for use with the
Describing SNMP Management Frameworks", RFC 2571, April 1999. SNMP", RFC 1215, March 1991.
[14] Rose, M. and K. McCloghrie, "Structure and Identification of [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Management Information for TCP/IP-based Internets", STD 16, Rose, M., and S. Waldbusser, "Structure of Management
RFC Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1155, May 1990. 1999.
[15] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
16, Rose, M., and S. Waldbusser, "Textual Conventions for
RFC 1212, March 1991. SMIv2", STD 58, RFC 2579, April 1999.
[16] Rose, M., "A Convention for Defining Traps for use with the [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
SNMP", RFC 1215, March 1991. Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[17] McCloghrie K., Perkins D. and J. Schoenwaelder, "Conformance [RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Statements for SMIv2", RFC 2580, April 1999. Network Management Protocol", STD 15, RFC 1157, May 1990.
[18] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, [RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, January "Introduction to Community-based SNMPv2", RFC 1901, January
1996. 1996.
[19] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, [RFC1906] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network "Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996. Management Protocol (SNMPv2)", RFC 1906, January 1996.
[20] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message [RFC2572] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message
Processing and Dispatching for the Simple Network Management Processing and Dispatching for the Simple Network Management
Protocol (SNMP)", RFC 2572, April 1999. Protocol (SNMP)", RFC 2572, April 1999.
[21] Blumenthal, U. and B. Wijnen, "User-based Security Model [RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) (USM) for version 3 of the Simple Network Management
for version 3 of the Simple Network Management Protocol Protocol (SNMPv3)", RFC 2574, April 1999.
(SNMPv3)", RFC 2574, April 1999.
[22] Levi, D., Meyer, P. and B. Stewart, "SNMP Applications", RFC [RFC1905] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
2573, April 1999. "Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[23] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based [RFC2573] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications",
Access RFC 2573, April 1999.
Control Model (VACM) for the Simple Network Management
Protocol
(SNMP)", RFC 2575, April 1999.
10. Security Considerations [RFC2575] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999.
[RFC2570] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction to Version 3 of the Internet-standard Network
Management Framework", RFC 2570, April 1999.
[RFC1213] McCloghrie, K. and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets - MIB-II",
STD 17, RFC 1213, March 1991.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB",
RFC 2863, June 2000.
[RFC2662] G. Bathrick, F. Ly "Definitions of Managed Objects for the
ADSL Lines", May 14, 1999.
11. Security Considerations
1) Blocking unauthorized access to the ADSL MIB via the element 1) Blocking unauthorized access to the ADSL MIB via the element
management system is outside the scope of this document. It should management system is outside the scope of this document. It should be
be
noted that access to the MIB permits the unauthorized entity to noted that access to the MIB permits the unauthorized entity to
modify the profiles (sect 6.4) such that both subscriber service modify the profiles (sect 6.4) such that both subscriber service and
and network operations can be interfered with. Subscriber service can be
network operations can be interfered with. Subscriber service can altered by modifying any of a number of service characteristics such
be
altered by modifying any of a number of service characteristics
such
as rate partitioning and maximum transmission rates. Network as rate partitioning and maximum transmission rates. Network
operations can be impacted by modification of trap thresholds such operations can be impacted by modification of trap thresholds such as
as
SNR margins. SNR margins.
2) There are a number of managed objects in this MIB that may be 2) There are a number of managed objects in this MIB that may be
considered to contain sensitive information. In particular, the considered to contain sensitive information. In particular, the
certain objects may be considered sensitive in many environments, certain objects may be considered sensitive in many environments,
since it would allow an intruder to obtain information about which since it would allow an intruder to obtain information about which
vendor's equipment is in use on the network. Therefore, it may be vendor's equipment is in use on the network. Therefore, it may be
important in some environments to control read access to these important in some environments to control read access to these
objects and possibly to even encrypt the values of these object objects and possibly to even encrypt the values of these object when
when
sending them over the network via SNMP. Not all versions of SNMP sending them over the network via SNMP. Not all versions of SNMP
provide features for such a secure environment. provide features for such a secure environment.
SNMPv1 by itself is such an insecure environment. Even if the SNMPv1 by itself is such an insecure environment. Even if the
network itself is secure (for example by using IPSec), even then, network itself is secure (for example by using IPSec), even then,
there is no control as to who on the secure network is allowed to there is no control as to who on the secure network is allowed to
access and GET (read) the objects in this MIB. It is recommended access and GET (read) the objects in this MIB. It is recommended
that the implementors consider the security features as provided that the implementors consider the security features as provided by
by
the SNMPv3 framework. Specifically, the use of the User-based the SNMPv3 framework. Specifically, the use of the User-based
Security Model RFC 2574 [21] and the View-based Access Control Security Model RFC 2574 [21] and the View-based Access Control Model
Model
RFC 2575 [23] is recommended. RFC 2575 [23] is recommended.
It is then a customer/user responsibility to ensure that the SNMP It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly entity giving access to an instance of this MIB, is properly
configured to give access to those objects only to those configured to give access to those objects only to those principals
principals
(users) that have legitimate rights to access them. (users) that have legitimate rights to access them.
3) ADSL layer connectivity from the ATU-R will permit the 3) ADSL layer connectivity from the ATU-R will permit the subscriber
subscriber
to manipulate both the ADSL link directly and the AOC/EOC channels to manipulate both the ADSL link directly and the AOC/EOC channels
for their own loop. For example, unchecked or unfiltered for their own loop. For example, unchecked or unfiltered
fluctuations initiated by the subscriber could generate sufficient fluctuations initiated by the subscriber could generate sufficient
traps to potentially overwhelm either the management interface to traps to potentially overwhelm either the management interface to the
the
network or the element manager. Other attacks affecting the ATU-R network or the element manager. Other attacks affecting the ATU-R
portions of the MIB may also be possible. portions of the MIB may also be possible.
11. Intellectual Property Notice 11. Intellectual Property Notice
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described pertain to the implementation or use of the technology described in
in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on has made any effort to identify any such rights. Information on the
the
IETF's procedures with respect to rights in standards-track and IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances claims of rights made available for publication and any assurances of
of
licenses to be made available, or the result of an attempt made to licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such obtain a general license or permission for the use of such
proprietary rights by implementers or users of this specification proprietary rights by implementers or users of this specification can
can
be obtained from the IETF Secretariat." be obtained from the IETF Secretariat."
The IETF invites any interested party to bring to its attention The IETF invites any interested party to bring to its attention any
any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF this standard. Please address the information to the IETF Executive
Executive
Director. Director.
12. Authors' Addresses 12. Authors' Addresses
Faye Ly Faye Ly
Copper Mountain Networks Salira Optical Systems
Norcal Office 2698 Orchard Parkway
2470 Embarcadero Way San Jose, CA 95134
Palo Alto, CA 94303
Phone: +1 650-687-3323 Phone: +1 408-382-0088
Fax: +1 650-687-3372 Fax: +1 408-382-1688
EMail: faye@coppermountain.com EMail: faye@salira.com
Gregory Bathrick Gregory Bathrick
NOKIA High Speed Access Nodes NOKIA High Speed Access Nodes
1310 Redwood Way, 1310 Redwood Way,
Petaluma, CA 94954, USA Petaluma, CA 94954, USA
Phone: +1 707-793-7030 Phone: +1 707-793-7030
Fax: +1 707-792-0850 Fax: +1 707-792-0850
EMail: greg.bathrick@nokia.com EMail: greg.bathrick@nokia.com
13. Full Copyright Statement 13. Full Copyright Statement
Copyright (C) The Internet Society (1999). All Rights Reserved. Copyright (C) The Internet Society (2001). All Rights Reserved.
This document and translations of it may be copied and furnished This document and translations of it may be copied and furnished to
to others, and derivative works that comment on or otherwise explain it
others, and derivative works that comment on or otherwise explain
it
or assist in its implementation may be prepared, copied, published or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph kind, provided that the above copyright notice and this paragraph are
are
included on all such copies and derivative works. However, this included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by document itself may not be modified in any way, such as by removing
removing the copyright notice or references to the Internet Society or other
the copyright notice or references to the Internet Society or
other
Internet organizations, except as needed for the purpose of Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than followed, or as required to translate it into languages other than
English. English.
The limited permissions granted above are perpetual and will not The limited permissions granted above are perpetual and will not be
be
revoked by the Internet Society or its successors or assigns. revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on This document and the information contained herein is provided on an
an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement Acknowledgement
Funding for the RFC Editor function is currently provided by the Funding for the RFC Editor function is currently provided by the
Internet Society. Internet Society.
Table of Contents
1. Status of this Memo ..................................... 1
2. Abstract ............................................... 1
3. The SNMP Network Management Framework ................... 1
4. Introduction ............................................ 2
5. Relationship of the ADSL LINE EXTENSION MIB with standard MIBs
............................................ 3
6. Conventions used in the MIB ............................. 3
7. Conformance and Compliance .............................. 5
8. Definitions ............................................. 5
9. Acknowledgments ......................................... 25
10. References ............................................. 26
11. Security Considerations ................................ 27
12. Authors' Addresses ..................................... 28
13. Full Copyright Satement ................................ 29
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/