draft-ietf-adslmib-gbond-eth-mib-01.txt   draft-ietf-adslmib-gbond-eth-mib-02.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track M. Morgenstern Intended status: Standards Track M. Morgenstern
Expires: May 22, 2008 ECI Telecom Expires: May 12, 2011 ECI Telecom
November 19, 2007 November 08, 2010
Ethernet-based xDSL multi-pair bonding (G.Bond/Ethernet) MIB Ethernet-based xDSL multi-pair bonding (G.Bond/Ethernet) MIB
draft-ietf-adslmib-gbond-eth-mib-01.txt draft-ietf-adslmib-gbond-eth-mib-02.txt
Abstract
This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP based internets.
This document proposes an extension to the GBOND-MIB module with a
set of objects for managing Ethernet-based multi-pair bonded xDSL
interfaces, defined in ITU-T recommendation G.998.2.
Status of This Memo Status of This Memo
By submitting this Internet-Draft, each author represents that any This Internet-Draft is submitted in full conformance with the
applicable patent or other IPR claims of which he or she is aware provisions of BCP 78 and BCP 79.
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF). Note that other groups may also distribute
other groups may also distribute working documents as Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at This Internet-Draft will expire on May 12, 2011.
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 22, 2008.
Copyright Notice Copyright Notice
Copyright (C) The IETF Trust (2007). Copyright (c) 2010 IETF Trust and the persons identified as the
document authors. All rights reserved.
Abstract
This document defines Management Information Base (MIB) module for This document is subject to BCP 78 and the IETF Trust's Legal
use with network management protocols in TCP/IP based internets. Provisions Relating to IETF Documents
This document proposes an extension to the G.Bond MIB module with a (http://trustee.ietf.org/license-info) in effect on the date of
set of objects for managing Ethernet-based multi-pair bonded xDSL publication of this document. Please review these documents
interfaces, defined in ITU-T recommendation G.998.2. carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. The Internet-Standard Management Framework . . . . . . . . . . 3 2. The Internet-Standard Management Framework . . . . . . . . . . 3
3. The DSL Forum Management Framework for xDSL Bonding . . . . . 3 3. The Broadband Forum Management Framework for xDSL Bonding . . 3
4. Relation to other MIB modules . . . . . . . . . . . . . . . . 3 4. Relation to other MIB modules . . . . . . . . . . . . . . . . 3
4.1. Relationship to Interfaces Group MIB module . . . . . . . 4 4.1. Relationship to Interfaces Group MIB module . . . . . . . 4
4.2. Relationship to G.Bond MIB module . . . . . . . . . . . . 4 4.2. Relationship to G.Bond MIB module . . . . . . . . . . . . 4
4.3. Relationship to EFM Copper MIB module . . . . . . . . . . 4 4.2.1. BACP-based Discovery . . . . . . . . . . . . . . . . . 4
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 4 4.3. Relationship to EFM Copper MIB module . . . . . . . . . . 6
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4 5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 7
5.1.1. TODO/Open Issues . . . . . . . . . . . . . . . . . . . 4 5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.2. Mapping of IEEE 802.3 Managed Objects . . . . . . . . . . 5 5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 7
5.3. Mapping of DSL Forum WT-159 Managed Objects . . . . . . . 5 5.3. Mapping of Broadband Forum TR-159 Managed Objects . . . . 7
6. G.Bond/Ethernet MIB Definitions . . . . . . . . . . . . . . . 6 6. G.Bond/Ethernet MIB Definitions . . . . . . . . . . . . . . . 9
7. Security Considerations . . . . . . . . . . . . . . . . . . . 19 7. Security Considerations . . . . . . . . . . . . . . . . . . . 47
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 20 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 48
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 48
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 48
10.1. Normative References . . . . . . . . . . . . . . . . . . . 20 10.1. Normative References . . . . . . . . . . . . . . . . . . . 48
10.2. Informative References . . . . . . . . . . . . . . . . . . 21 10.2. Informative References . . . . . . . . . . . . . . . . . . 49
1. Introduction 1. Introduction
The Ethernet-based xDSL Multi-Pair Bonding, a.k.a. G.Bond/Ethernet, The Ethernet-based xDSL Multi-Pair Bonding, a.k.a. G.Bond/Ethernet,
is specified in ITU-T G.998.2 recommendation [G.998.2], which defines is specified in ITU-T G.998.2 recommendation [G.998.2], which defines
a method for bonding (or aggregating) of multiple xDSL lines into a a method for bonding (or aggregating) of multiple xDSL lines (or
single bi-directional logical link, carrying an Ethernet traffic. individual bearer channels in multiple xDSL lines) into a single bi-
directional logical link, carrying an Ethernet traffic.
The MIB module, defined in this document, provides G.Bond/Ethernet The MIB module, defined in this document, provides G.Bond/Ethernet
specific objects for the management of G.998.2 bonded interfaces, specific objects for the management of G.998.2 bonded interfaces,
extending the common bonding objects specified in GBOND-MIB extending the common bonding objects specified in GBOND-MIB
[I-D.ietf-adslmib-gbond-mib] module. [I-D.ietf-adslmib-gbond-mib] module.
2. The Internet-Standard Management Framework 2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
skipping to change at page 3, line 36 skipping to change at page 3, line 37
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58, module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]. [RFC2580].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119]. document are to be interpreted as described in RFC 2119 [RFC2119].
3. The DSL Forum Management Framework for xDSL Bonding 3. The Broadband Forum Management Framework for xDSL Bonding
This document makes use of the DSL Forum technical report Management This document makes use of the Broadband Forum technical report
Framework for xDSL Bonding [WT-159], defining a management model and Management Framework for xDSL Bonding [TR-159], defining a management
a hierarchy of management objects for the bonded xDSL interfaces. model and a hierarchy of management objects for the bonded xDSL
interfaces.
4. Relation to other MIB modules 4. Relation to other MIB modules
This section outlines the relationship of the MIB modules defined in This section outlines the relationship of the MIB modules defined in
this document with other MIB modules described in the relevant RFCs. this document with other MIB modules described in the relevant RFCs.
Specifically, the following MIB modules are discussed: Interfaces Specifically, the following MIB modules are discussed: Interfaces
Group MIB (IF-MIB), G.Bond MIB (GBOND-MIB), and EFM Copper MIB (EFM- Group MIB (IF-MIB), G.Bond MIB (GBOND-MIB), and EFM Copper MIB (EFM-
CU-MIB). CU-MIB).
4.1. Relationship to Interfaces Group MIB module 4.1. Relationship to Interfaces Group MIB module
A G.Bond/Ethernet port is a private case of a Bonded multi-pair xDSL A G.Bond/Ethernet port is a private case of a Bonded multi-pair xDSL
interface and as such is managed using generic interface management interface and as such is managed using generic interface management
objects defined in the IF-MIB [RFC2863]. In particular, an interface objects defined in the IF-MIB [RFC2863]. In particular, an interface
index (ifIndex) is used to index instances of G.Bond/Ethernet ports index (ifIndex) is used to index instances of G.Bond/Ethernet ports,
and channels in a managed system. as well as xDSL lines/channels, in a managed system.
4.2. Relationship to G.Bond MIB module 4.2. Relationship to G.Bond MIB module
GBOND-MIB [I-D.ietf-adslmib-gbond-mib] module defines management GBOND-MIB [I-D.ietf-adslmib-gbond-mib] module defines management
objects common for all Bonded multi-pair xDSL interfaces. In objects common for all Bonded multi-pair xDSL interfaces. In
particular it describes the bonding management, port and channel particular it describes the bonding management, bonded port and
configuration, initialization sequence etc. channel configuration, G.994.1 handshake-based discovery,
initialization sequence etc.
Both GBOND-MIB and GBOND-ETH-MIB modules are REQUIRED to manage a Both GBOND-MIB and GBOND-ETH-MIB modules are REQUIRED to manage a
G.Bond/Ethernet port. G.Bond/Ethernet port.
4.2.1. BACP-based Discovery
All G.998 protocols share a G.handshake-based remote Bonding Channel
Entity (BCE) discovery. The GBOND-MIB module provides and example of
an automatic BCE connection to the corresponding GPS ports of a
generic G.998 multi-port Central Office (CO) device, using the
G.handshake-based discovery. Ammendment 2 to the ITU-T G.998.2
specification [G.998.2-Amd2], provides an alternative optional
Bonding Aggregation Control Protocol (BACP) for in-service discovery,
aggregation and pair management.
The following pseudo-code gives the same example of the Discovery and
automatic BCE assignment for a multi-GBS G.Bond/Eth CO device, using
BACP objects defined in this MIB module, IF-CAP-STACK-MIB and IF-MIB
modules [Note that automatic BCE assignment is only shown here for
the purposes of the example. Fixed BCE pre-assignment, manual
assignment or auto-assignment using an alternative internal algorithm
may be chosen by a particular implementation]:
// Go over all GBS ports in the CO device
FOREACH gbs[i] IN CO_device
{ // Perform discovery and auto-assignment on GBS ports
// with room for more Channels
IF ( gbs[i].NumBCEs < gbs[i].BondCapacity )
{ IF ( gbs[i].gBondEthOperCp == cpBACP )
{ // Using BACP
// Get Eligible Group ID and Remote Group ID
// from a connected BCE (during BACP
// initialization each BCE is connected to its own GBS)
gid = ifStackTable[gbs[i]].bce[0].gBondEthBceEligibleGroupID;
rgid =
ifStackTable[gbs[i]].bce[0].gBondEthBcePeerEligibleGroupID;
// Go over all disconnected Channels, which can
// pottentially be connected to the GBS
FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND
NOT IN ifStackTable[gbs[i]] // not connected
{ // Read the Remote Group ID for the selected BCE
// and compare if with the Remote Group ID of the connected
// BCE.
r = bce[j].gBondEthBcePeerEligibleGroupID;
IF ( r == rgid AND gbs[i].NumBCEs < gbs[i].BondCapacity)
{ // Remote RT_device connected via BCE[j] is a peer
// for GBS[i] and there room for another BCE in the
// GBS[i] aggregation group (max. Bonding capacity is
// not reached yet).
// Connect this BCE to the GBS (via ifStackTable,
// ifInvStackTable being inverse of ifStackTable is
// updated automatically, i.e., gbs[i] is auto-added
// to ifInvStackTable[bce[j]])
ADD bce[j] TO ifStackTable[gbs[i]];
gbs[i].NumBCEs = gbs[i].NumBCEs + 1;
}
}
// At this point we have discovered all local BCEs which
// are physically connected to the same remote RT_device
// and connected them to GBS[i]. Go to the next GBS.
BREAK;
}
ELSE
{ // Use default G.HS discovery protocol
...
}
}
}
An SNMP Agent for a G.Bond device builds ifCapStackTable and its
inverse ifInvCapStackTable on device initialiation, according to the
cross-connect capabilities of the device. When BACP is used, the
gBondEthBceEligibleGroupID object identifying bonding eligibility
MUST be automatically updated, whenever the ifCapStackTable/
ifInvCapStackTable are changed.
4.3. Relationship to EFM Copper MIB module 4.3. Relationship to EFM Copper MIB module
EFM-CU-MIB [RFC5066] module defines objects for managing Ethernet in EFM-CU-MIB [RFC5066] module defines objects for managing Ethernet in
the First Mile Copper (EFMCu) interfaces 10PASS-TS and 2BASE-TL, the First Mile Copper (EFMCu) interfaces 10PASS-TS and 2BASE-TL,
defined in IEEE Std 802.3-2005 [802.3]. These interfaces are based defined in IEEE Std 802.3-2005 [802.3]. These interfaces are based
on Single-pair High-speed Digital Subscriber Line (SHDSL) [G.991.2] on Single-pair High-speed Digital Subscriber Line (SHDSL) [G.991.2]
and Very High speed Digital Subscriber Line (VDSL) [G.993.1] and Very High speed Digital Subscriber Line (VDSL) [G.993.1]
technology respectively, and can be optionally aggregated (bonded). technology respectively, and can be optionally aggregated (bonded).
ITU-T G.998.2 specification extends the IEEE 802.3 Clause 61 bonding ITU-T G.998.2 specification extends the IEEE 802.3 Clause 61 bonding
to work over any xDSL technology, providing the ability to bond to work over any xDSL technology, providing the ability to bond
individual channels as well as physical lines. individual channels as well as physical lines. It also allows the
use of alternative HDLC encapsulation instead of the default 64/
65-octet encapsulation and adds a new optional Bonding Aggregation
Control Protocol (BACP) for in-service discovery, aggregation and
pair management instead of the default G.handshake-based bonding
protocol, which can not be used in-service, while the link is up.
EFM-CU-MIB can be used to manage all aspects of the EFMCu interfaces, EFM-CU-MIB can be used to manage all aspects of the EFMCu physical
including the management of SHDSL/VDSL lines. GBOND-MIB and GBOND- interfaces (PHYs), including a complete (within the scope of the
ETH-MIB modules provide management objects only for the bonding part, 802.3 standard) management of the SHDSL/VDSL lines. GBOND-MIB and
leaving the management of the individual xDSL interfaces (lines/ GBOND-ETH-MIB modules on the other hand, provide management objects
channels) to the respective xDSL MIB modules. only for the bonding part, leaving the management of the individual
xDSL interfaces (lines/channels) to the respective xDSL-LINE-MIB
modules.
Therefore an IEEE 802.3 2BASE-TL/10PASS-TS interface can be managed
by either combination of the following MIB modules:
IF-MIB + IF-CAP-STACK-MIB + EtherLike-MIB + MAU-MIB + EFM-CU-MIB
IF-MIB + IF-CAP-STACK-MIB + GBOND-MIB + GBOND-ETH-MIB + HDSL2-
SHDSL-LINE-MIB/VDSL-LINE-MIB
Finally, EFM-CU-MIB does not include historical Performance
Monitoring (PM), while GBOND-MIB/GBOND-MIB-ETH/xDSL-LINE-MIB
combination provides full PM functionality for a bonded link and
individual xDSL lines.
5. MIB Structure 5. MIB Structure
5.1. Overview 5.1. Overview
_EdNote: TBC... _ The main management objects defined in the GBOND-ETH-MIB module are
split into 2 groups, structured as recommended by RFC 4181 [RFC4181]:
5.1.1. TODO/Open Issues o gBondEthPort - containing objects for configuration, capabilities,
status and PM of G.Bond/Eth ports. Note that the rest of the
objects for the Generic Bonded Sub-layer (GBS) port configuration,
capabilities, status, notifications and PM, is located in the
GBOND-MIB module.
o Add Peformance Monitoring counters - reuse HC-PerfHist-TC-MIB o gBondEthBce - containing objects representing OPTIONAl status
[RFC3705] information and BACP configuration for each Bonding Channel Entity
(BCE). Note that the rest of the objects for the BCE
configuration, capabilities, status and notifications, is located
in relevant xDSL line MIB modules as well as in the GBOND-MIB
module.
o Add support for ITU-T draft BACP (frame-based discovery and pair 5.2. Performance Monitoring
management)
5.2. Mapping of IEEE 802.3 Managed Objects The OPTIONAL performance monitoring counters, thresholds and history
buckets (interval-counters), similar to those defined in [TR-159] are
implemented using the textual conventions defined in the HC-PerfHist-
TC-MIB [RFC3705]. The HC-PerfHist-TC-MIB defines 64-bit versions of
the textual conventions found in PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen
minute boundary of a wall clock. Likewise, the beginning of each one
day intervals SHOULD be aligned with the start of a day.
Counters are not reset when a GBS is reinitialized, but rather only
when the agent is reset or reinitialized (or under specific request
outside the scope of this MIB module).
5.3. Mapping of Broadband Forum TR-159 Managed Objects
This section contains the mapping between relevant managed objects This section contains the mapping between relevant managed objects
(attributes) defined in [802.3] and managed objects defined in this (attributes) defined in [TR-159] and managed objects defined in this
document. document.
+----------------------+---------------------------+ +----------------------------------+--------------------------------+
| 802.3 Managed Object | Corresponding SNMP Object | | TR-159 Managed Object | Corresponding SNMP Object |
+----------------------+---------------------------+ +----------------------------------+--------------------------------+
| oGroup | | | oBondEth - Basic Package | |
+----------------------+---------------------------+ | (Mandatory) | |
+----------------------+---------------------------+ +----------------------------------+--------------------------------+
| TBC... | TBC... | | aEthBACPSupported | gBondEthBacpSupported |
+----------------------+---------------------------+ +----------------------------------+--------------------------------+
| aEthTcAdminType | gBondEthTcAdminType |
+----------------------------------+--------------------------------+
| aEthTcOperType | gBondEthTcOperType |
+----------------------------------+--------------------------------+
| aEthTcTypesSupported | gBondEthTcTypesSupported |
+----------------------------------+--------------------------------+
| aEthRxErrors | gBondEthRxErrors |
+----------------------------------+--------------------------------+
| aEthRxSmallFragments | gBondEthRxSmallFragments |
+----------------------------------+--------------------------------+
| aEthRxLargeFragments | gBondEthRxLargeFragments |
+----------------------------------+--------------------------------+
| aEthRxBadFragments | gBondEthRxBadFragments |
+----------------------------------+--------------------------------+
| aEthRxLostFragments | gBondEthRxLostFragments |
+----------------------------------+--------------------------------+
| aEthRxLostStarts | gBondEthRxLostStarts |
+----------------------------------+--------------------------------+
| aEthRxLostEnds | gBondEthRxLostEnds |
+----------------------------------+--------------------------------+
| aEthRxOverflows | gBondEthRxOverflows |
+----------------------------------+--------------------------------+
| oBondEth - BACP Package | |
| (Optional) | |
+----------------------------------+--------------------------------+
| aEthAdminCP | gBondEthAdminCp |
+----------------------------------+--------------------------------+
| aEthOperCP | gBondEthOperCp |
+----------------------------------+--------------------------------+
| oChannel - BACP package | |
| (Optional) | |
+----------------------------------+--------------------------------+
| aChannelEligibleGroupID | gBondEthBceEligibleGroupID |
+----------------------------------+--------------------------------+
| aChannelEligibleStreamID | gBondEthBcePeerEligibleGroupID |
+----------------------------------+--------------------------------+
| oChannel - PM package (Optional) | |
+----------------------------------+--------------------------------+
| aChannelPtmTcRxCodingViolations | gBondEthBceTcInCodingErrors |
+----------------------------------+--------------------------------+
+----------------------------------+--------------------------------+
| aChannelPtmTcRxCrcErrors | gBondEthBceTcInCrcErrors |
+----------------------------------+--------------------------------+
Table 1: Mapping of 802.3 Managed Objects Table 1: Mapping of TR-159 Managed Objects
_EdNote: Finish the table and remove TBC... _ 6. G.Bond/Ethernet MIB Definitions
5.3. Mapping of DSL Forum WT-159 Managed Objects GBOND-ETH-MIB DEFINITIONS ::= BEGIN
This section contains the mapping between relevant managed objects IMPORTS
(attributes) defined in [WT-159] and managed objects defined in this MODULE-IDENTITY,
document. OBJECT-TYPE,
Counter32,
mib-2,
Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION,
TruthValue,
PhysAddress
FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
ifIndex
FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705]
;
------------------------------------------------------------------------
gBondEthMIB MODULE-IDENTITY
LAST-UPDATED "201011030000Z" -- Nov 03, 2010
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html
+---------------------------------+-----------------------------+ Mailing Lists:
| WT-159 Managed Object | Corresponding SNMP Object | General Discussion: adslmib@ietf.org
+---------------------------------+-----------------------------+ To Subscribe: adslmib-request@ietf.org
| oBondEth | | In Body: subscribe your_email_address
+---------------------------------+-----------------------------+
| aEthTcAdminType | gBondEthTcAdminType |
+---------------------------------+-----------------------------+
| aEthTcOperType | gBondEthTcOperType |
+---------------------------------+-----------------------------+
| aEthTcTypesSupported | gBondEthTcTypesSupported |
+---------------------------------+-----------------------------+
| aEthRxErrors | gBondEthInErrors |
+---------------------------------+-----------------------------+
| aEthRxSmallFragments | gBondEthInSmallFragments |
+---------------------------------+-----------------------------+
| aEthRxLargeFragments | gBondEthInLargeFragments |
+---------------------------------+-----------------------------+
| aEthRxBadFragments | gBondEthInBadFragments |
+---------------------------------+-----------------------------+
| aEthRxLostFragments | gBondEthInLostFragments |
| aEthRxLostStarts | gBondEthInLostStarts |
+---------------------------------+-----------------------------+
| aEthRxLostEnds | gBondEthInLostEnds |
+---------------------------------+-----------------------------+
| aEthRxOverflows | gBondEthInOverflows |
+---------------------------------+-----------------------------+
| oChannel | |
+---------------------------------+-----------------------------+
| aChannelPtmTcRxCodingViolations | gBondEthBceTcInCodingErrors |
+---------------------------------+-----------------------------+
| aChannelPtmTcRxCrcErrors | gBondEthBceTcInCrcErrors |
+---------------------------------+-----------------------------+
Table 2: Mapping of WT-159 Managed Objects Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.,
Petach-Tikva 49517
Israel
Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com
6. G.Bond/Ethernet MIB Definitions Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 10173
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com
GBOND-ETH-MIB DEFINITIONS ::= BEGIN Editor: Moti Morgenstern
Postal: ECI Telecom
30 Hasivim St.
Petach-Tikva 49517
Israel
Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com"
IMPORTS DESCRIPTION
MODULE-IDENTITY, OBJECT-TYPE, Counter32 "The objects in this MIB module are used to manage the
FROM SNMPv2-SMI -- [RFC2578] Ethernet-based multi-pair bonded xDSL Interfaces, defined in
TEXTUAL-CONVENTION ITU-T recommendation G.998.2 (G.Bond/Ethernet).
FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
ifIndex
FROM IF-MIB -- [RFC2863]
-- gBondMIB
-- FROM GBOND-MIB -- [RFCXXXX]
-- EdNote: Replace XXXX with the actual RFC number &
-- remove this note
;
gBondEthMIB MODULE-IDENTITY This MIB module MUST be used in conjunction with GBOND-MIB
LAST-UPDATED "200711190000Z" -- November 19, 2007 module, common to all G.Bond technologies.
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: The following references are used throughout this MIB module:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge [G.998.2] refers to:
Postal: ECI Telecom, Ltd. ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005.
30 Hasivim St., [G.998.2-Amd2] refers to:
Petach-Tikva 49517 ITU-T G.998.2 Amendment 2, December 2007
Israel
Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com
Editor: Edward Beili [802.3] refers to:
Postal: Actelis Networks, Inc. IEEE Std 802.3-2005: 'IEEE Standard for Information
25 Bazel St., P.O.B. 10173 technology - Telecommunications and information exchange
Petach-Tikva 10173 between systems - Local and metropolitan area networks -
Israel Specific requirements -
Phone: +972-3-924-3491 Part 3: Carrier Sense Multiple Access with Collision
EMail: edward.beili@actelis.com Detection (CSMA/CD) Access Method and Physical Layer
Specifications', December 2005.
Editor: Moti Morgenstern [TR-159] refers to:
Postal: ECI Telecom
30 Hasivim St.
Petach-Tikva 49517
Israel
Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com"
DESCRIPTION Broadband Forum Technical Report: 'Management Framework for
"The objects in this MIB module are used to manage the xDSL Bonding', December 2008.
Ethernet-based multi-pair bonded xDSL Interfaces, defined in
ITU-T recommendation G.998.2 (G.Bond/Ethernet).
This MIB module MUST be used in conjunction with GBOND-MIB Naming Conventions:
module, common to all G.Bond technologies. BACP - Bonding Aggregation Control Protocol
BCE - Bonding Channel Entity
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer
HDLC - High-level Data Link Control
PTM-TC - Packet Transfer Mode Transmission Convergence
(sub-layer)
SNR - Signal to Noise Ratio
TC - Transmission Convergence (sub-layer)
UAS - Unavailable Seconds
The following references are used throughout this MIB module: Copyright (C) The IETF Trust (2010).
This version of this MIB module is part of RFC YYYY;
see the RFC itself for full legal notices."
[G.998.2] refers to: REVISION "201011030000Z" -- Nov 03, 2010
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair DESCRIPTION "Initial version, published as RFC YYYY."
bonding', January 2005.
[802.3] refers to: -- EdNote: Replace YYYY with the actual RFC number &
IEEE Std 802.3-2005: 'IEEE Standard for Information -- remove this note.
technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Physical Layer
Specifications', December 2005.
[WT-159] refers to: ::= { mib-2 ZZZ }
DSL Forum Technical Report: 'Management Framework for xDSL
Bonding', May 2007.
Naming Conventions: -- EdNote: Replace ZZZ with a real OID once it is
BCE - Bonding Channel Entity -- allocated & remove this note.
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer
HDLC - High-level Data Link Control
PTM-TC - Packet Transfer Mode Transmission Convergence
(sub-layer)
SNR - Signal to Noise Ratio
TC - Transmission Convergence (sub-layer)
Copyright (C) The Internet Society (2007). This version of this -- Sections of the module
MIB module is part of RFC XXXX; see the RFC itself for full -- Structured as recommended by [RFC4181], Appendix D
legal notices."
REVISION "200711190000Z" -- November 19, 2007 gBondEthObjects OBJECT IDENTIFIER ::= { gBondEthMIB 1 }
DESCRIPTION "Initial version, published as RFC YYYY."
-- EdNote: Replace YYYY with the actual RFC number & gBondEthConformance OBJECT IDENTIFIER ::= { gBondEthMIB 2 }
-- remove this note
::= { mib-2 ZZZ } -- Groups in the module
-- EdNote: Replace ZZZ with a real OID once it is gBondEthPort OBJECT IDENTIFIER ::= { gBondEthObjects 1 }
-- allocated & remove this note.
-- Sections of the module gBondEthBce OBJECT IDENTIFIER ::= { gBondEthObjects 2 }
-- Structured as recommended by [RFC4181], Appendix D
gBondEthObjects OBJECT IDENTIFIER ::= { gBondEthMIB 1 } -------------------------------
-- Textual Conventions
-------------------------------
GBondEthPtmTcType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention represents possible PTM-TC types in
G.bond/Eth ports. The following values are defined:
tc6465 - 64/65-octet encapsulation, as defined in
[802.3] Clause 61.3.3
tcHDLC - HDLC encapsulation, as defined in [G.998.2]
Annex B"
SYNTAX INTEGER {
tc6465(1),
tcHDLC(2)
}
gBondEthConformance OBJECT IDENTIFIER ::= { gBondEthMIB 2 } GBondEthCpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention represents possible Control Protocol
types in G.bond/Eth ports. The following values are defined:
unknown - the Control Protocol cannot be determined.
cpHS - G.handshake-based discovery and aggregation,
as specified in [G.998.2]
cpBACP - Bonding Aggregation Control Protocol (BACP) -
a frame-based discovery, aggregation and link
management protocol, as specified in
[G.998.2-Amd2] Annex C."
SYNTAX INTEGER {
unknown(0),
cpHS(1),
cpBACP(2)
}
-- Groups in the module -------------------------------
-- GBS Notifications group
-------------------------------
gBondEthPort OBJECT IDENTIFIER ::= { gBondEthObjects 1 } -- empty --
gBondEthBce OBJECT IDENTIFIER ::= { gBondEthObjects 2 } -------------------------------
-- GBS group
-------------------------------
-- Textual Conventions gBondEthPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Configuration of G.Bond/Eth GBS ports. Entries in
this table MUST be maintained in a persistent manner"
::= { gBondEthPort 1 }
GBondEthPtmTcType ::= TEXTUAL-CONVENTION gBondEthPortConfEntry OBJECT-TYPE
STATUS current SYNTAX GBondEthPortConfEntry
DESCRIPTION MAX-ACCESS not-accessible
"This textual convention represents possible PTM-TC types in STATUS current
G.bond/Eth ports. The following values are defined: DESCRIPTION
tc6465 - 64/65-octet encapsulation, as defined in "An entry in the G.Bond/Eth Port Configuration table.
[802.3] Clause 61.3.3 Each entry represents an G.Bond Ethernet port indexed by the
ifIndex.
Note that an G.Bond/Eth GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortConfTable 1 }
tcHDLC - HDLC encapsulation, as defined in [G.998.2] GBondEthPortConfEntry ::=
Annex B" SEQUENCE {
SYNTAX INTEGER { gBondEthTcAdminType GBondEthPtmTcType,
tc6465(1), gBondEthAdminCp GBondEthCpType
tcHDLC(2) }
}
-- GBS Notifications group gBondEthTcAdminType OBJECT-TYPE
-- empty -- SYNTAX GBondEthPtmTcType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative (desired) PTM-TC encapsulation type of
G.Bond/Eth port (GBS).
Possible values are:
tc6465(1) - 64/65-octet encapsulation
tcHDLC(2) - HDLC encapsulation
Attempts to set a port to a non-supported PTM-TC encapsulation
type (see gBondEthTcTypesSupported) SHALL be rejected.
-- GBS group Changing gBondEthTcAdminType is a traffic disruptive
operation and as such SHALL be done when the link is Down.
Attempts to cange this object SHALL be rejected if the link
is Up or Initializing.
gBondEthPortConfTable OBJECT-TYPE This object MUST be maintained in a persistent manner.
SYNTAX SEQUENCE OF GBondEthPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Configuration of G.Bond/Eth GBS ports. Entries in
this table MUST be maintained in a persistent manner"
::= { gBondEthPort 1 }
gBondEthPortConfEntry OBJECT-TYPE This object maps to the TR-159 attribute aEthTcAdminType."
SYNTAX GBondEthPortConfEntry REFERENCE
MAX-ACCESS not-accessible "[TR-159] 5.5.3.4"
STATUS current ::= { gBondEthPortConfEntry 1 }
DESCRIPTION
"An entry in the G.Bond/Eth Port Configuration table.
Each entry represents an G.Bond Ethernet port indexed by the
ifIndex.
Note that an G.Bond/Eth GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortConfTable 1 }
GBondEthPortConfEntry ::= gBondEthAdminCp OBJECT-TYPE
SEQUENCE { SYNTAX GBondEthCpType
gBondEthTcAdminType GBondEthPtmTcType MAX-ACCESS read-write
} STATUS current
DESCRIPTION
"Administrative (desired) bonding control protocol of
G.Bond/Eth port (GBS). Possible values are:
cpHS(1) - use G.hs-based protocol (default)
cpBACP(2) - use frame-based BACP
Note G.hs-based protocol support is mandatory, according to
[G.998.2]. Attempts to set a port to a non-supported bonding
control protocol (e.g. BACP if the value of
gBondEthBacpSupported is false) SHALL be rejected.
gBondEthTcAdminType OBJECT-TYPE Changing gBondEthAdminCp is a traffic disruptive operation and
SYNTAX GBondEthPtmTcType as such SHALL be done when the link is Down.
MAX-ACCESS read-write Attempts to cange this object SHALL be rejected if the link
STATUS current is Up or Initializing.
DESCRIPTION
"Administrative (desired) PTM-TC encapsulation type of
G.Bond/Eth port (GBS).
Possible values are:
tc6465(1) - 64/65-octet encapsulation
tcHDLC(2) - HDLC encapsulation
Attempts to set a port to a non-supported PTM-TC encapsulation
type (see gBondEthTcTypesSupported) SHALL be rejected.
Changing gBondEthTcAdminType is a traffic disruptive This object MUST be maintained in a persistent manner.
operation and as such SHALL be done when the link is Down.
Attempts to cange this object SHALL be rejected if the link
is Up or Initializing.
This object maps to the WT-159 attribute aEthTcAdminType. This object maps to the TR-159 attribute aEthAdminCP."
REFERENCE
"[TR-159] 5.5.3.2"
DEFVAL { 1 }
::= { gBondEthPortConfEntry 2 }
This object MUST be maintained in a persistent manner." gBondEthPortCapabilityTable OBJECT-TYPE
REFERENCE SYNTAX SEQUENCE OF GBondEthPortCapabilityEntry
"[WT-159] 5.5.3.1" MAX-ACCESS not-accessible
::= { gBondEthPortConfEntry 1 } STATUS current
DESCRIPTION
"Table for Capabilities of G.Bond/Eth Ports. Entries in this
table MUST be maintained in a persistent manner"
::= { gBondEthPort 2 }
gBondEthPortCapabilityTable OBJECT-TYPE gBondEthPortCapabilityEntry OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthPortCapabilityEntry SYNTAX GBondEthPortCapabilityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for Capabilities of G.Bond/Eth Ports. Entries in this "An entry in the G.Bond/Eth Port Capability table.
table MUST be maintained in a persistent manner" Each entry represents an G.Bond port indexed by the ifIndex.
::= { gBondEthPort 2 } Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortCapabilityTable 1 }
gBondEthPortCapabilityEntry OBJECT-TYPE GBondEthPortCapabilityEntry ::=
SYNTAX GBondEthPortCapabilityEntry SEQUENCE {
MAX-ACCESS not-accessible gBondEthTcTypesSupported BITS,
STATUS current gBondEthBacpSupported TruthValue
DESCRIPTION }
"An entry in the G.Bond/Eth Port Capability table.
Each entry represents an G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortCapabilityTable 1 }
GBondEthPortCapabilityEntry ::= gBondEthTcTypesSupported OBJECT-TYPE
SEQUENCE { SYNTAX BITS {
gBondEthTcTypesSupported BITS tc6465(0),
} tcHDLC(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTM-TC Encapsulation types supported by the G.Bond/Eth port.
This is a bitmap of possible encapsulation types. The various
bit positions are:
tc6465 - GBS is capable of 64/65-octet encapsulation
tcHDLC - GBS is capable of HDLC encapsulation
gBondEthTcTypesSupported OBJECT-TYPE A desired encapsulation is determined by
SYNTAX BITS { gBondEthTcAdminType, while gBondEthTcOperType reflects the
tc6465(0), current operating mode.
tcHDLC(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTM-TC Encapsulation types supported by the G.Bond/Eth port.
This is a bitmap of possible encapsulation types. The various
bit positions are:
tc6465 - GBS is capable of 64/65-octet encapsulation
tcHDLC - GBS is capable of HDLC encapsulation
A desired encapsulation is determined by This object maps to the TR-159 attribute
gBondEthTcAdminType, while gBondEthTcOperType reflects the aEthTcTypesSupported."
current operating mode. REFERENCE
"[TR-159] 5.5.3.6"
::= { gBondEthPortCapabilityEntry 1 }
This object maps to the WT-159 attribute gBondEthBacpSupported OBJECT-TYPE
aEthTcTypesSupported." SYNTAX TruthValue
REFERENCE MAX-ACCESS read-only
"[WT-159] 5.5.3.3" STATUS current
::= { gBondEthPortCapabilityEntry 1 } DESCRIPTION
"Indicates whether Bonding Aggregation Control Protocol
(BACP) - frame-based discovery, aggregation and link management
protocol specified in [G.998.2-Amd2]) is supported by the
G.Bond/Ethernet port.
A value of true(1) indicates that the BACP is supported.
A value of false(2) indicates that the BACP is unsupported.
gBondEthPortStatusTable OBJECT-TYPE The BACP functionality, if supported, can be enabled or
SYNTAX SEQUENCE OF GBondEthPortStatusEntry disabled via gBondEthAdminCP, while gBondEthOperCP
MAX-ACCESS not-accessible reflects the current BACP operating mode.
STATUS current
DESCRIPTION
"This table provides overall status information of G.Bond
ports, complementing the generic status information from the
ifTable of IF-MIB. Additional status information about
connected BCEs is available from the relevant line MIBs
This table contains live data from the equipment. As such, This object maps to the TR-159 attribute aEthBACPSupported."
it is NOT persistent." REFERENCE
::= { gBondEthPort 3 } "[TR-159] 5.5.3.1, [G.998.2-Amd2] Annex C"
::= { gBondEthPortCapabilityEntry 2 }
gBondEthPortStatusEntry OBJECT-TYPE gBondEthPortStatusTable OBJECT-TYPE
SYNTAX GBondEthPortStatusEntry SYNTAX SEQUENCE OF GBondEthPortStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/Eth Port Status table. "This table provides overall status information of G.Bond
Each entry represents an G.Bond/Eth port indexed by the ports, complementing the generic status information from the
ifIndex. ifTable of IF-MIB. Additional status information about
Note that an G.Bond GBS port runs on top of a single connected BCEs is available from the relevant line MIBs
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortStatusTable 1 }
GBondEthPortStatusEntry ::= This table contains live data from the equipment. As such,
SEQUENCE { it is NOT persistent."
gBondEthTcOperType GBondEthPtmTcType, ::= { gBondEthPort 3 }
gBondEthInErrors Counter32,
gBondEthInSmallFragments Counter32,
gBondEthInLargeFragments Counter32,
gBondEthInBadFragments Counter32,
gBondEthInLostFragments Counter32,
gBondEthInLostStarts Counter32,
gBondEthInLostEnds Counter32,
gBondEthInOverflows Counter32
}
gBondEthTcOperType OBJECT-TYPE gBondEthPortStatusEntry OBJECT-TYPE
SYNTAX GBondEthPtmTcType SYNTAX GBondEthPortStatusEntry
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current operational encapsulation type of the G.Bond/Eth "An entry in the G.Bond/Eth Port Status table.
port. Each entry represents an G.Bond/Eth port indexed by the
Possible values are: ifIndex.
tc6465(1) - GBS uses 64/65-octet encapsulation Note that an G.Bond GBS port runs on top of a single
tcHDLC(2) - GBS uses HDLC encapsulation or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthPortStatusTable 1 }
The operational PTM-TC encapsulation type can be configured GBondEthPortStatusEntry ::=
via gBondEthTcAdminType variable. SEQUENCE {
gBondEthTcOperType GBondEthPtmTcType,
gBondEthOperCp GBondEthCpType,
gBondEthRxErrors Counter32,
gBondEthRxSmallFragments Counter32,
gBondEthRxLargeFragments Counter32,
gBondEthRxBadFragments Counter32,
gBondEthRxLostFragments Counter32,
gBondEthRxLostStarts Counter32,
gBondEthRxLostEnds Counter32,
gBondEthRxOverflows Counter32
}
This objects maps to the WT-159 aEthTcOperType." gBondEthTcOperType OBJECT-TYPE
REFERENCE SYNTAX GBondEthPtmTcType
"[WT-159] 5.5.3.2" MAX-ACCESS read-only
::= { gBondEthPortStatusEntry 1 } STATUS current
DESCRIPTION
"Current operational encapsulation type of the G.Bond/Eth
port.
Possible values are:
tc6465(1) - GBS uses 64/65-octet encapsulation
tcHDLC(2) - GBS uses HDLC encapsulation
gBondEthInErrors OBJECT-TYPE The operational PTM-TC encapsulation type can be configured
SYNTAX Counter32 via gBondEthTcAdminType.
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of fragments that have been received across the
gamma interface and discarded.
This object maps to the WT-159 attribute aEthRxErrors. This objects maps to the TR-159 attribute aEthTcOperType."
REFERENCE
"[TR-159] 5.5.3.5"
::= { gBondEthPortStatusEntry 1 }
Discontinuities in the value of this counter can occur at gBondEthOperCp OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX GBondEthCpType
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.4" "Current operational bonding discovery and aggregation control
::= { gBondEthPortStatusEntry 2 } protocol of the G.Bond/Eth port.
Possible values are:
unknown(0) - the protocol cannot be determined, e.g. when
the GBS is down
cpHS(1) - GBS uses G.hs-based protocol
cpBACP(2) - GBS uses frame-based BACP
gBondEthInSmallFragments OBJECT-TYPE The operational discovery and aggregation control protocol can
SYNTAX Counter32 be configured via gBondEthAdminCp variable.
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of fragments smaller than minFragmentSize
(64 Bytes), that have been received across the gamma
interface and discarded.
This object maps to the WT-159 attribute aEthRxSmallFragments. This objects maps to the TR-159 attribute aEthOperCP."
REFERENCE
"[TR-159] 5.5.3.3"
::= { gBondEthPortStatusEntry 2 }
Discontinuities in the value of this counter can occur at gBondEthRxErrors OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.5" "A number of fragments that have been received across the
::= { gBondEthPortStatusEntry 3 } gamma interface and discarded.
gBondEthInLargeFragments OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of fragments larger than maxFragmentSize
(512 Bytes), which have been received across the gamma
interface and discarded.
This object maps to the WT-159 attribute aEthRxLargeFragments. This object maps to the TR-159 attribute aEthRxErrors."
REFERENCE
"[TR-159] 5.5.3.7"
::= { gBondEthPortStatusEntry 3 }
Discontinuities in the value of this counter can occur at gBondEthRxSmallFragments OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.6" "A number of fragments smaller than minFragmentSize
::= { gBondEthPortStatusEntry 4 } (64 Bytes), that have been received across the gamma
interface and discarded.
gBondEthInBadFragments OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of fragments which do not fit into the sequence
expected by the frame assembly function, that have been
received across the gamma interface and discarded (the
frame buffer is flushed to the next valid frame start).
This object maps to the WT-159 attribute aEthRxBadFragments. This object maps to the TR-159 attribute aEthRxSmallFragments."
REFERENCE
"[TR-159] 5.5.3.8"
::= { gBondEthPortStatusEntry 4 }
Discontinuities in the value of this counter can occur at gBondEthRxLargeFragments OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.7" "A number of fragments larger than maxFragmentSize
::= { gBondEthPortStatusEntry 5 } (512 Bytes), which have been received across the gamma
interface and discarded.
gBondEthInLostFragments OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of gaps in the sequence of fragments, which have
been received across the gamma interface (the frame buffer is
flushed to the next valid frame start, when fragment/fragments
expected by the frame assembly function is/are not received).
This object maps to the WT-159 attribute aEthRxLostFragments. This object maps to the TR-159 attribute aEthRxLargeFragments."
REFERENCE
"[TR-159] 5.5.3.9"
::= { gBondEthPortStatusEntry 5 }
Discontinuities in the value of this counter can occur at gBondEthRxBadFragments OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.8" "A number of fragments which do not fit into the sequence
::= { gBondEthPortStatusEntry 6 } expected by the frame assembly function, that have been
received across the gamma interface and discarded (the
frame buffer is flushed to the next valid frame start).
gBondEthInLostStarts OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of missing StartOfPacket indicators expected by the
frame assembly function.
This object maps to the WT-159 attribute aEthRxLostStarts. This object maps to the TR-159 attribute aEthRxBadFragments."
REFERENCE
"[TR-159] 5.5.3.10"
::= { gBondEthPortStatusEntry 6 }
Discontinuities in the value of this counter can occur at gBondEthRxLostFragments OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.9" "A number of gaps in the sequence of fragments, which have
::= { gBondEthPortStatusEntry 7 } been received across the gamma interface (the frame buffer is
flushed to the next valid frame start, when fragment/fragments
expected by the frame assembly function is/are not received).
gBondEthInLostEnds OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of missing EndOfPacket indicators expected by the
frame assembly function.
This object maps to the WT-159 attribute aEthRxLostEnds. This object maps to the TR-159 attribute aEthRxLostFragments."
REFERENCE
"[TR-159] 5.5.3.11"
::= { gBondEthPortStatusEntry 7 }
Discontinuities in the value of this counter can occur at gBondEthRxLostStarts OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.10" "A number of missing StartOfPacket indicators expected by the
::= { gBondEthPortStatusEntry 8 } frame assembly function.
gBondEthInOverflows OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX Counter32 re-initialization of the management system, and at other times
MAX-ACCESS read-only as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"A number of fragments, received across the gamma interface
and discarded, which would have caused the frame assembly
buffer to overflow.
This object maps to the WT-159 attribute aEthRxOverflows. This object maps to the TR-159 attribute aEthRxLostStarts."
REFERENCE
"[TR-159] 5.5.3.12"
::= { gBondEthPortStatusEntry 8 }
Discontinuities in the value of this counter can occur at gBondEthRxLostEnds OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX Counter32
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS read-only
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.3.11" "A number of missing EndOfPacket indicators expected by the
::= { gBondEthPortStatusEntry 9 } frame assembly function.
-- BCE group Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
gBondEthBceStatusTable OBJECT-TYPE This object maps to the TR-159 attribute aEthRxLostEnds."
SYNTAX SEQUENCE OF GBondEthBceStatusEntry REFERENCE
MAX-ACCESS not-accessible "[TR-159] 5.5.3.13"
STATUS current ::= { gBondEthPortStatusEntry 9 }
DESCRIPTION
"This table provides common status information of G.Bond/Eth
BCE ports.
This table contains live data from the equipment. As such, gBondEthRxOverflows OBJECT-TYPE
it is NOT persistent." SYNTAX Counter32
::= { gBondEthBce 1 } MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of fragments, received across the gamma interface
and discarded, which would have caused the frame assembly
buffer to overflow.
gBondEthBceStatusEntry OBJECT-TYPE Discontinuities in the value of this counter can occur at
SYNTAX GBondEthBceStatusEntry re-initialization of the management system, and at other times
MAX-ACCESS not-accessible as indicated by the value of ifCounterDiscontinuityTime,
STATUS current defined in IF-MIB.
DESCRIPTION
"An entry in the G.Bond/Eth BCE Status table.
Each entry represents common aspects of a G.Bond/Eth BCE port
indexed by the ifIndex. Note that a BCE port can be stacked
below a single GBS port, also indexed by ifIndex,
possibly together with other BCE ports."
INDEX { ifIndex }
::= { gBondEthBceStatusTable 1 }
GBondEthBceStatusEntry ::= This object maps to the TR-159 attribute aEthRxOverflows."
SEQUENCE { REFERENCE
gBondEthBceTcInCodingErrors Counter32, "[TR-159] 5.5.3.14"
gBondEthBceTcInCrcErrors Counter32 ::= { gBondEthPortStatusEntry 10 }
}
gBondEthBceTcInCodingErrors OBJECT-TYPE -------------------------------
SYNTAX Counter32 -- GBS Performance Monitoring group
MAX-ACCESS read-only -------------------------------
STATUS current gBondEthPM OBJECT IDENTIFIER ::= { gBondEthPort 4 }
DESCRIPTION
"A number of PTM-TC encapsulation errors. This counter is
incremented for each encapsulation error detected by the
PTM-TC receive function.
This object maps to WT-159 attribute gBondEthPortPerfCurrTable OBJECT-TYPE
aChannelPtmTcRxCodingViolations. SYNTAX SEQUENCE OF GBondEthPortPerfCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for a G.Bond/ETth port. This table contains live data from the
equipment and as such is NOT persistent."
::= { gBondEthPM 1 }
Discontinuities in the value of this counter can occur at gBondEthPortPerfCurrEntry OBJECT-TYPE
re-initialization of the management system, and at other times SYNTAX GBondEthPortPerfCurrEntry
as indicated by the value of ifCounterDiscontinuityTime, MAX-ACCESS not-accessible
defined in IF-MIB." STATUS current
REFERENCE DESCRIPTION
"[WT-159] 5.5.7.5" "An entry in the G.Bond/Eth Port PM table.
::= { gBondEthBceStatusEntry 1 } Each entry represents an G.Bond/Eth port indexed by the
ifIndex."
INDEX { ifIndex }
::= { gBondEthPortPerfCurrTable 1 }
gBondEthBceTcInCrcErrors OBJECT-TYPE GBondEthPortPerfCurrEntry ::=
SYNTAX Counter32 SEQUENCE {
MAX-ACCESS read-only gBondEthPortPerf15MinValidIntervals HCPerfValidIntervals,
STATUS current gBondEthPortPerf15MinInvalidIntervals HCPerfInvalidIntervals,
DESCRIPTION gBondEthPortPerfCurr15MinTimeElapsed HCPerfTimeElapsed,
"A number of PTM-TC CRC errors. This counter is incremented gBondEthPortPerfCurr15MinRxErrors HCPerfCurrentCount,
for each CRC error detected by the PTM-TC receive function. gBondEthPortPerfCurr15MinRxSmallFragments HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxLargeFragments HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxBadFragments HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxLostFragments HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxLostStarts HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxLostEnds HCPerfCurrentCount,
gBondEthPortPerfCurr15MinRxOverflows HCPerfCurrentCount,
gBondEthPortPerf1DayValidIntervals Unsigned32,
gBondEthPortPerf1DayInvalidIntervals Unsigned32,
gBondEthPortPerfCurr1DayTimeElapsed HCPerfTimeElapsed,
gBondEthPortPerfCurr1DayRxErrors HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxSmallFragments HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxLargeFragments HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxBadFragments HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxLostFragments HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxLostStarts HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxLostEnds HCPerfCurrentCount,
gBondEthPortPerfCurr1DayRxOverflows HCPerfCurrentCount
}
This object maps to WT-159 attribute aChannelPtmTcRxCrcErrors. gBondEthPortPerf15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation unless the measurement was
(re-)started recently, in which case the value will be the
number of complete 15 minutes intervals for which there are at
least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
Discontinuities in the value of this counter can occur at This object partially maps to the TR-159 attribute
re-initialization of the management system, and at other times aGroupPerf15MinValidIntervals."
as indicated by the value of ifCounterDiscontinuityTime, REFERENCE
defined in IF-MIB." "[TR-159] 5.5.1.32"
REFERENCE ::= { gBondEthPortPerfCurrEntry 1 }
"[WT-159] 5.5.7.6"
::= { gBondEthBceStatusEntry 2 }
-- gBondEthPortPerf15MinInvalidIntervals OBJECT-TYPE
-- Conformance Statements SYNTAX HCPerfInvalidIntervals
-- MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero except in cases where the data for some
intervals are not available.
gBondEthGroups OBJECT IDENTIFIER This object partially maps to the TR-159 attribute
::= { gBondEthConformance 1 } aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159] 5.5.1.33"
::= { gBondEthPortPerfCurrEntry 2 }
gBondEthCompliances OBJECT IDENTIFIER gBondEthPortPerfCurr15MinTimeElapsed OBJECT-TYPE
::= { gBondEthConformance 2 } SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance history interval.
-- Object Groups This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
gBondEthBasicGroup OBJECT-GROUP REFERENCE
OBJECTS { "[TR-159] 5.5.1.34"
gBondEthTcTypesSupported, ::= { gBondEthPortPerfCurrEntry 3 }
gBondEthTcAdminType,
gBondEthTcOperType,
gBondEthInErrors,
gBondEthInSmallFragments,
gBondEthInLargeFragments,
gBondEthInBadFragments,
gBondEthInLostFragments,
gBondEthInLostStarts,
gBondEthInLostEnds,
gBondEthInOverflows,
gBondEthBceTcInCodingErrors,
gBondEthBceTcInCrcErrors
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/Eth GBS ports."
::= { gBondEthGroups 1 }
gBondEthBceGroup OBJECT-GROUP gBondEthPortPerfCurr15MinRxErrors OBJECT-TYPE
OBJECTS { SYNTAX HCPerfCurrentCount
gBondEthBceTcInCodingErrors, MAX-ACCESS read-only
gBondEthBceTcInCrcErrors STATUS current
} DESCRIPTION
STATUS current "A read-only count of errored fragments received and discarded
DESCRIPTION by a G.Bond/Eth port, during the current 15-minute performance
"A collection of objects representing OPTIONAL management history interval.
information for G.Bond/Eth BCE ports."
::= { gBondEthGroups 2 }
-- Compliance Statements Note that the total number of errored fragments is indicated by
the gBondEthRxErrors object.
gBondEthCompliance MODULE-COMPLIANCE This object is inhibited during Unavailable Seconds (UAS)."
STATUS current REFERENCE
DESCRIPTION "[TR-159] 5.5.3.7"
"The compliance statement for G.Bond Ethernet interfaces. ::= { gBondEthPortPerfCurrEntry 4}
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement gBondEthPortPerfCurr15MinRxSmallFragments OBJECT-TYPE
---------- -------------------- SYNTAX HCPerfCurrentCount
IF-MIB ifCompliance3 MAX-ACCESS read-only
GBOND-MIB gBondCompliance" STATUS current
DESCRIPTION
"A read-only count of fragments smaller than minFragmentSize
(64 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the current 15-minute performance
history interval.
MODULE -- this module Note that the total number of small fragments is indicated by
MANDATORY-GROUPS { the gBondEthRxSmallFragments object.
gBondEthBasicGroup
}
GROUP gBondEthBceGroup This object is inhibited during Unavailable Seconds (UAS)."
DESCRIPTION REFERENCE
"Support for this group is OPTIONAL" "[TR-159] 5.5.3.8"
::= { gBondEthPortPerfCurrEntry 5}
OBJECT gBondEthTcTypesSupported gBondEthPortPerfCurr15MinRxLargeFragments OBJECT-TYPE
SYNTAX BITS { SYNTAX HCPerfCurrentCount
tc6465(0), MAX-ACCESS read-only
tcHDLC(1) STATUS current
} DESCRIPTION
DESCRIPTION "A read-only count of fragments larger than maxFragmentSize
"Support for all TC types is not required. However at least (512 Bytes), that have been received and discarded by a
one value SHALL be supported" G.Bond/Eth port, during the current 15-minute performance
history interval.
OBJECT gBondEthTcAdminType Note that the total number of large fragments is indicated by
MIN-ACCESS read-only the gBondEthRxLargeFragments object.
DESCRIPTION
"Write access is not required (needed only for GBS
supporting more than a single TC encapsulation type, i.e.
tc6465 and tcHDLC"
::= { gBondEthCompliances 1 } This object is inhibited during Unavailable Seconds (UAS)."
END REFERENCE
"[TR-159] 5.5.3.9"
::= { gBondEthPortPerfCurrEntry 6}
gBondEthPortPerfCurr15MinRxBadFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments which do not fit into the
sequence expected by the frame assembly function, that have been
receivedand discarded by a G.Bond/Eth port, during the current
15-minute performance history interval.
Note that the total number of small fragments is indicated by
the gBondEthRxBadFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.10"
::= { gBondEthPortPerfCurrEntry 7}
gBondEthPortPerfCurr15MinRxLostFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of gaps in the sequence of fragments,
expected by the frame assembly function of a G.Bond/Eth port,
during the current 15-minute performance history interval.
Note that the total number of the lost fragments is indicated by
the gBondEthRxLostFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.11"
::= { gBondEthPortPerfCurrEntry 8}
gBondEthPortPerfCurr15MinRxLostStarts OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing StartOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
current 15-minute performance history interval.
Note that the total number of missing StartOfPacket indicators
is indicated by the gBondEthRxLostStarts object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.12"
::= { gBondEthPortPerfCurrEntry 9}
gBondEthPortPerfCurr15MinRxLostEnds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing EndOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
current 15-minute performance history interval.
Note that the total number of missing EndOfPacket indicators
is indicated by the gBondEthRxLostEnds object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.13"
::= { gBondEthPortPerfCurrEntry 10}
gBondEthPortPerfCurr15MinRxOverflows OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments that have been received and
discarded by a G.Bond/Eth port, which would have caused the
frame assembly buffer to overflow, during the current 15-minute
performance history interval.
Note that the total number of fragments which would have caused
the frame assembly buffer to overflow is indicated by the
gBondEthRxOverflows object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.14"
::= { gBondEthPortPerfCurrEntry 11}
gBondEthPortPerf1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation unless the measurement was (re-)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159] 5.5.1.45"
::= { gBondEthPortPerfCurrEntry 12 }
gBondEthPortPerf1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero except in
cases where the data for some intervals are not available."
REFERENCE
"[TR-159] 5.5.1.46"
::= { gBondEthPortPerfCurrEntry 13 }
gBondEthPortPerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance history interval."
REFERENCE
"[TR-159] 5.5.1.47"
::= { gBondEthPortPerfCurrEntry 14 }
gBondEthPortPerfCurr1DayRxErrors OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of errored fragments received and discarded
by a G.Bond/Eth port, during the current 1-day performance
history interval.
Note that the total number of errored fragments is indicated by
the gBondEthRxErrors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.7"
::= { gBondEthPortPerfCurrEntry 15 }
gBondEthPortPerfCurr1DayRxSmallFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments smaller than minFragmentSize
(64 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the current 1-day performance history
interval.
Note that the total number of small fragments is indicated by
the gBondEthRxSmallFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.8"
::= { gBondEthPortPerfCurrEntry 16}
gBondEthPortPerfCurr1DayRxLargeFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments larger than maxFragmentSize
(512 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the current 1-day performance history
interval.
Note that the total number of large fragments is indicated by
the gBondEthRxLargeFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.9"
::= { gBondEthPortPerfCurrEntry 17}
gBondEthPortPerfCurr1DayRxBadFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments which do not fit into the
sequence expected by the frame assembly function, that have been
receivedand discarded by a G.Bond/Eth port, during the current
1-day performance history interval.
Note that the total number of small fragments is indicated by
the gBondEthRxBadFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.10"
::= { gBondEthPortPerfCurrEntry 18}
gBondEthPortPerfCurr1DayRxLostFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of gaps in the sequence of fragments,
expected by the frame assembly function of a G.Bond/Eth port,
during the current 1-day performance history interval.
Note that the total number of the lost fragments is indicated by
the gBondEthRxLostFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.11"
::= { gBondEthPortPerfCurrEntry 19}
gBondEthPortPerfCurr1DayRxLostStarts OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing StartOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
current 1-day performance history interval.
Note that the total number of missing StartOfPacket indicators
is indicated by the gBondEthRxLostStarts object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.12"
::= { gBondEthPortPerfCurrEntry 20}
gBondEthPortPerfCurr1DayRxLostEnds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing EndOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
current 1-day performance history interval.
Note that the total number of missing EndOfPacket indicators
is indicated by the gBondEthRxLostEnds object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.13"
::= { gBondEthPortPerfCurrEntry 21}
gBondEthPortPerfCurr1DayRxOverflows OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments that have been received and
discarded by a G.Bond/Eth port, which would have caused the
frame assembly buffer to overflow, during the current 1-day
performance history interval.
Note that the total number of fragments which would have caused
the frame assembly buffer to overflow is indicated by the
gBondEthRxOverflows object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.14"
::= { gBondEthPortPerfCurrEntry 22}
-- Port PM history: 15-min buckets
gBondEthPortPerf15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthPortPerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/Eth port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondEthPM 2 }
gBondEthPortPerf15MinEntry OBJECT-TYPE
SYNTAX GBondEthPortPerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/Eth Port historical 15-minute PM table.
Each entry represents performance monitoring data for a
G.Bond/Eth port, indexed by ifIndex, collected during a
particular 15-minute interval, indexed by
gBondEthPortPerf15MinIntervalIndex."
INDEX { ifIndex, gBondEthPortPerf15MinIntervalIndex }
::= { gBondEthPortPerf15MinTable 1 }
GBondEthPortPerf15MinEntry ::=
SEQUENCE {
gBondEthPortPerf15MinIntervalIndex Unsigned32,
gBondEthPortPerf15MinIntervalMoniTime HCPerfTimeElapsed,
gBondEthPortPerf15MinIntervalRxErrors HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxSmallFragments HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxLargeFragments HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxBadFragments HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxLostFragments HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxLostStarts HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxLostEnds HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalRxOverflows HCPerfCurrentCount,
gBondEthPortPerf15MinIntervalValid TruthValue
}
gBondEthPortPerf15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.57"
::= { gBondEthPortPerf15MinEntry 1 }
gBondEthPortPerf15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { gBondEthPortPerf15MinEntry 2 }
gBondEthPortPerf15MinIntervalRxErrors OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of errored fragments received and discarded
by a G.Bond/Eth port, during the 15-minute performance history
interval.
Note that the total number of errored fragments is indicated by
the gBondEthRxErrors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.7"
::= { gBondEthPortPerf15MinEntry 3}
gBondEthPortPerf15MinIntervalRxSmallFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments smaller than minFragmentSize
(64 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the 15-minute performance history
interval.
Note that the total number of small fragments is indicated by
the gBondEthRxSmallFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.8"
::= { gBondEthPortPerf15MinEntry 4}
gBondEthPortPerf15MinIntervalRxLargeFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments larger than maxFragmentSize
(512 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the 15-minute performance history
interval.
Note that the total number of large fragments is indicated by
the gBondEthRxLargeFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.9"
::= { gBondEthPortPerf15MinEntry 5}
gBondEthPortPerf15MinIntervalRxBadFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments which do not fit into the
sequence expected by the frame assembly function, that have been
receivedand discarded by a G.Bond/Eth port, during the 15-minute
performance history interval.
Note that the total number of small fragments is indicated by
the gBondEthRxBadFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.10"
::= { gBondEthPortPerf15MinEntry 6}
gBondEthPortPerf15MinIntervalRxLostFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of gaps in the sequence of fragments,
expected by the frame assembly function of a G.Bond/Eth port,
during the 15-minute performance history interval.
Note that the total number of the lost fragments is indicated by
the gBondEthRxLostFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.11"
::= { gBondEthPortPerf15MinEntry 7}
gBondEthPortPerf15MinIntervalRxLostStarts OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing StartOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
15-minute performance history interval.
Note that the total number of missing StartOfPacket indicators
is indicated by the gBondEthRxLostStarts object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.12"
::= { gBondEthPortPerf15MinEntry 8}
gBondEthPortPerf15MinIntervalRxLostEnds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing EndOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
15-minute performance history interval.
Note that the total number of missing EndOfPacket indicators
is indicated by the gBondEthRxLostEnds object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.13"
::= { gBondEthPortPerf15MinEntry 9}
gBondEthPortPerf15MinIntervalRxOverflows OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments that have been received and
discarded by a G.Bond/Eth port, which would have caused the
frame assembly buffer to overflow, during the 15-minute
performance history interval.
Note that the total number of fragments which would have caused
the frame assembly buffer to overflow is indicated by the
gBondEthRxOverflows object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.14"
::= { gBondEthPortPerf15MinEntry 10}
gBondEthPortPerf15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159] 5.5.1.58"
::= { gBondEthPortPerf15MinEntry 11 }
-- Port PM history: 1-day buckets
gBondEthPortPerf1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthPortPerf1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/Eth port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondEthPM 3 }
gBondEthPortPerf1DayEntry OBJECT-TYPE
SYNTAX GBondEthPortPerf1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/Eth port historical 1-day PM table.
Each entry represents performance monitoring data for such port,
indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondEthPortPerf1DayIntervalIndex."
INDEX { ifIndex, gBondEthPortPerf1DayIntervalIndex }
::= { gBondEthPortPerf1DayTable 1 }
GBondEthPortPerf1DayEntry ::=
SEQUENCE {
gBondEthPortPerf1DayIntervalIndex Unsigned32,
gBondEthPortPerf1DayIntervalMoniTime HCPerfTimeElapsed,
gBondEthPortPerf1DayIntervalRxErrors HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxSmallFragments HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxLargeFragments HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxBadFragments HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxLostFragments HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxLostStarts HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxLostEnds HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalRxOverflows HCPerfCurrentCount,
gBondEthPortPerf1DayIntervalValid TruthValue
}
gBondEthPortPerf1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.62"
::= { gBondEthPortPerf1DayEntry 1 }
gBondEthPortPerf1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (86400 seconds), except in a situation where
performance data could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159] 5.5.1.64"
::= { gBondEthPortPerf1DayEntry 2 }
gBondEthPortPerf1DayIntervalRxErrors OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of errored fragments received and discarded
by a G.Bond/Eth port, during the 1-day performance history
interval.
Note that the total number of errored fragments is indicated by
the gBondEthRxErrors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.7"
::= { gBondEthPortPerf1DayEntry 3 }
gBondEthPortPerf1DayIntervalRxSmallFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments smaller than minFragmentSize
(64 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the 1-day performance history interval.
Note that the total number of small fragments is indicated by
the gBondEthRxSmallFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.8"
::= { gBondEthPortPerf1DayEntry 4}
gBondEthPortPerf1DayIntervalRxLargeFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments larger than maxFragmentSize
(512 Bytes), that have been received and discarded by a
G.Bond/Eth port, during the 1-day performance history interval.
Note that the total number of large fragments is indicated by
the gBondEthRxLargeFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.9"
::= { gBondEthPortPerf1DayEntry 5}
gBondEthPortPerf1DayIntervalRxBadFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments which do not fit into the
sequence expected by the frame assembly function, that have been
receivedand discarded by a G.Bond/Eth port, during the 1-day
performance history interval.
Note that the total number of small fragments is indicated by
the gBondEthRxBadFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.10"
::= { gBondEthPortPerf1DayEntry 6}
gBondEthPortPerf1DayIntervalRxLostFragments OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of gaps in the sequence of fragments,
expected by the frame assembly function of a G.Bond/Eth port,
during the 1-day performance history interval.
Note that the total number of the lost fragments is indicated by
the gBondEthRxLostFragments object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.11"
::= { gBondEthPortPerf1DayEntry 7}
gBondEthPortPerf1DayIntervalRxLostStarts OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing StartOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
1-day performance history interval.
Note that the total number of missing StartOfPacket indicators
is indicated by the gBondEthRxLostStarts object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.12"
::= { gBondEthPortPerf1DayEntry 8}
gBondEthPortPerf1DayIntervalRxLostEnds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of missing EndOfPacket indicators expected
by the frame assembly function of a G.Bond/Eth port, during the
1-day performance history interval.
Note that the total number of missing EndOfPacket indicators
is indicated by the gBondEthRxLostEnds object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.13"
::= { gBondEthPortPerf1DayEntry 9}
gBondEthPortPerf1DayIntervalRxOverflows OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of fragments that have been received and
discarded by a G.Bond/Eth port, which would have caused the
frame assembly buffer to overflow, during the 1-day performance
history interval.
Note that the total number of fragments which would have caused
the frame assembly buffer to overflow is indicated by the
gBondEthRxOverflows object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.3.14"
::= { gBondEthPortPerf1DayEntry 10}
gBondEthPortPerf1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159] 5.5.1.63"
::= { gBondEthPortPerf1DayEntry 11 }
-------------------------------
-- BCE group
-------------------------------
gBondEthBceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthBceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Configuration of G.Bond/Eth specific aspects for the
Bonding Channel Entity (BCE) ports (modems/channels).
Entries in this table MUST be maintained in a persistent
manner."
::= { gBondEthBce 1 }
gBondEthBceConfEntry OBJECT-TYPE
SYNTAX GBondEthBceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/Eth BCE Configuration table.
Each entry represents G.998.2-specific aspects of a BCE port
indexed by the ifIndex. Note that an G.Bond/Eth BCE port can be
stacked below a single GBS port, also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondEthBceConfTable 1 }
GBondEthBceConfEntry ::=
SEQUENCE {
gBondEthBceEligibleGroupID PhysAddress,
gBondEthBcePeerEligibleGroupID PhysAddress
}
gBondEthBceEligibleGroupID OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0|6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BACP Eligible Group ID of a G.Bond/ETH BCE port.
A universally unique 6-octet long identifier, used by the
OPTIONAL BACP, to determine bonding eligibility. When two BCEs
have the same gBondEthBceEligibleGroupID on a system, they are
eligible to be aggregated on that system. Typically, all BCEs
on a BTU-R device would be assigned the same
gBondEthBceEligibleGroupID, to assert that all of the BCEs
should be in the same bonded group. BCEs with different
gBondEthBceEligibleGroupID values MUST NOT be connected to the
same GBS.
BCEs with the same gBondEthBceEligibleGroupID MAY be connected
to different GBS ports.
This object MUST be instantiated during BACP initialization,
when every BCE belongs to its own GBS. Attempts to change this
object MUST be rejected if the BCE is aggregated with other
BCEs, i.e. more than one BCE is connected to the same GBS, or
if the BCE in question is not eligible to be bonded with other
BCEs having the same value (e.g. the bonding is limited to a
single Line Card and BCEs are located on the different Line
Cards, or BCEs are the channels of the same line).
Note that bonding eligibility is reflected in the
ifCapStackTable and its inverse ifInvCapStackTable, and as such
any modification of gBondEthBceEligibleGroupID MUST be reflected
in these tables.
A zero-length octet string SHALL be returned on an attempt to
read this object on systems not supporting BACP (the value of
gBondEthBacpSupported for the connected GBS is false).
This object maps to the TR-159 attribute
aChannelEligibleGroupID."
REFERENCE
"[TR-159] 5.5.7.3"
::= { gBondEthBceConfEntry 1 }
gBondEthBcePeerEligibleGroupID OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0|6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BACP Eligible Group ID of a peer G.Bond/ETH BCE port, most
recently received by the local BCE via Local info TLV BACPDU
message from the peer BCE.
A universally unique 6-octet long identifier, used by the
OPTIONAL BACP, to determine bonding eligibility.
BCEs with different gBondEthBcePeerEligibleGroupID values
MUST NOT be connected to the same GBS.
BCEs with the same gBondEthBcePeerEligibleGroupID MAY be
connected to different GBS ports.
A zero-length octet string SHALL be returned on an attempt to
read this object on systems not supporting BACP (the value of
gBondEthBacpSupported for the connected GBS is false) or when
no BACPPDUs has been received from the peer BCE.
This object maps to the G.998.2-Amd2 attribute
Remote Group ID."
REFERENCE
"[G.998.2-Amd2] C.3.1.6"
::= { gBondEthBceConfEntry 2 }
gBondEthBceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondEthBceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides common status information of G.Bond/Eth
BCE ports.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { gBondEthBce 2 }
gBondEthBceStatusEntry OBJECT-TYPE
SYNTAX GBondEthBceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/Eth BCE Status table.
Each entry represents common aspects of a G.Bond/Eth BCE port
indexed by the ifIndex. Note that a BCE port can be stacked
below a single GBS port, also indexed by ifIndex,
possibly together with other BCE ports."
INDEX { ifIndex }
::= { gBondEthBceStatusTable 1 }
GBondEthBceStatusEntry ::=
SEQUENCE {
gBondEthBceTcInCodingErrors Counter32,
gBondEthBceTcInCrcErrors Counter32
}
gBondEthBceTcInCodingErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of PTM-TC encapsulation errors. This counter is
incremented for each encapsulation error detected by the
PTM-TC receive function.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
This object maps to TR-159 attribute
aChannelPtmTcRxCodingViolations."
REFERENCE
"[TR-159] 5.5.7.8"
::= { gBondEthBceStatusEntry 1 }
gBondEthBceTcInCrcErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of PTM-TC CRC errors. This counter is incremented
for each CRC error detected by the PTM-TC receive function.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
This object maps to TR-159 attribute aChannelPtmTcRxCrcErrors."
REFERENCE
"[TR-159] 5.5.7.9"
::= { gBondEthBceStatusEntry 2 }
-------------------------------
-- Conformance Statements
-------------------------------
gBondEthGroups OBJECT IDENTIFIER
::= { gBondEthConformance 1 }
gBondEthCompliances OBJECT IDENTIFIER
::= { gBondEthConformance 2 }
-- Object Groups
gBondEthBasicGroup OBJECT-GROUP
OBJECTS {
gBondEthTcTypesSupported,
gBondEthBacpSupported,
gBondEthTcAdminType,
gBondEthTcOperType,
gBondEthRxErrors,
gBondEthRxSmallFragments,
gBondEthRxLargeFragments,
gBondEthRxBadFragments,
gBondEthRxLostFragments,
gBondEthRxLostStarts,
gBondEthRxLostEnds,
gBondEthRxOverflows,
gBondEthBceTcInCodingErrors,
gBondEthBceTcInCrcErrors
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/Eth GBS ports."
::= { gBondEthGroups 1 }
gBondEthBacpGroup OBJECT-GROUP
OBJECTS {
gBondEthAdminCp,
gBondEthOperCp,
gBondEthBceEligibleGroupID,
gBondEthBcePeerEligibleGroupID
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for the OPTIONAL frame-based Bonding Aggregation Control
Protocol (BACP) used by G.Bond/Eth GBS ports instead of the
mandatory G.hs-based discovery and aggregation protocol."
::= { gBondEthGroups 2 }
gBondEthBceGroup OBJECT-GROUP
OBJECTS {
gBondEthBceTcInCodingErrors,
gBondEthBceTcInCrcErrors
}
STATUS current
DESCRIPTION
"A collection of objects representing OPTIONAL management
information for G.Bond/Eth BCE ports."
::= { gBondEthGroups 3 }
gBondEthPerfCurrGroup OBJECT-GROUP
OBJECTS {
gBondEthPortPerf15MinValidIntervals,
gBondEthPortPerf15MinInvalidIntervals,
gBondEthPortPerfCurr15MinTimeElapsed,
gBondEthPortPerfCurr15MinRxErrors,
gBondEthPortPerfCurr15MinRxSmallFragments,
gBondEthPortPerfCurr15MinRxLargeFragments,
gBondEthPortPerfCurr15MinRxBadFragments,
gBondEthPortPerfCurr15MinRxLostFragments,
gBondEthPortPerfCurr15MinRxLostStarts,
gBondEthPortPerfCurr15MinRxLostEnds,
gBondEthPortPerfCurr15MinRxOverflows,
gBondEthPortPerf1DayValidIntervals,
gBondEthPortPerf1DayInvalidIntervals,
gBondEthPortPerfCurr1DayTimeElapsed,
gBondEthPortPerfCurr1DayRxErrors,
gBondEthPortPerfCurr1DayRxSmallFragments,
gBondEthPortPerfCurr1DayRxLargeFragments,
gBondEthPortPerfCurr1DayRxBadFragments,
gBondEthPortPerfCurr1DayRxLostFragments,
gBondEthPortPerfCurr1DayRxLostStarts,
gBondEthPortPerfCurr1DayRxLostEnds,
gBondEthPortPerfCurr1DayRxOverflows
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/Eth ports."
::= { gBondEthGroups 4 }
gBondEthPerf15MinGroup OBJECT-GROUP
OBJECTS {
gBondEthPortPerf15MinIntervalMoniTime,
gBondEthPortPerf15MinIntervalRxErrors,
gBondEthPortPerf15MinIntervalRxSmallFragments,
gBondEthPortPerf15MinIntervalRxLargeFragments,
gBondEthPortPerf15MinIntervalRxBadFragments,
gBondEthPortPerf15MinIntervalRxLostFragments,
gBondEthPortPerf15MinIntervalRxLostStarts,
gBondEthPortPerf15MinIntervalRxLostEnds,
gBondEthPortPerf15MinIntervalRxOverflows,
gBondEthPortPerf15MinIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/Eth ports, during
previous 15-minute intervals ."
::= { gBondEthGroups 5 }
gBondEthPerf1DayGroup OBJECT-GROUP
OBJECTS {
gBondEthPortPerf1DayIntervalMoniTime,
gBondEthPortPerf1DayIntervalRxErrors,
gBondEthPortPerf1DayIntervalRxSmallFragments,
gBondEthPortPerf1DayIntervalRxLargeFragments,
gBondEthPortPerf1DayIntervalRxBadFragments,
gBondEthPortPerf1DayIntervalRxLostFragments,
gBondEthPortPerf1DayIntervalRxLostStarts,
gBondEthPortPerf1DayIntervalRxLostEnds,
gBondEthPortPerf1DayIntervalRxOverflows,
gBondEthPortPerf1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/Eth ports, during
previous 1-day intervals ."
::= { gBondEthGroups 6 }
-------------------------------
-- Compliance Statements
-------------------------------
gBondEthCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for G.Bond Ethernet interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance"
MODULE -- this module
MANDATORY-GROUPS {
gBondEthBasicGroup
}
GROUP gBondEthBceGroup
DESCRIPTION
"Support for this group is OPTIONAL"
GROUP gBondEthBacpGroup
DESCRIPTION
"Support for this group is OPTIONAL and only required for
implementations supporting BACP."
GROUP gBondEthPerfCurrGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring."
GROUP gBondEthPerf15MinGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting historical Performance Monitoring."
GROUP gBondEthPerf1DayGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring."
OBJECT gBondEthTcTypesSupported
SYNTAX BITS {
tc6465(0),
tcHDLC(1)
}
DESCRIPTION
"Support for all TC types is not required. However at least
one value SHALL be supported"
OBJECT gBondEthBacpSupported
SYNTAX TruthValue
DESCRIPTION
"Support for BACP is OPTIONAL, therefore a value of false(2)
SHALL be supported."
OBJECT gBondEthTcAdminType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required (needed only for GBS
supporting more than a single TC encapsulation type, i.e.
tc6465 and tcHDLC."
OBJECT gBondEthAdminCp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required (needed only for GBS
supporting BACP in addition to mandatory G.hs-based bonding
discovery and aggregation protocol."
::= { gBondEthCompliances 1 }
END
7. Security Considerations 7. Security Considerations
There is a number of managed objects defined in the GBOND-ETH-MIB There is a number of managed objects defined in the GBOND-ETH-MIB
module that have a MAX-ACCESS clause of read-write or read-create. module that have a MAX-ACCESS clause of read-write or read-create.
Writing to these objects can have potentially disruptive effects on Writing to these objects can have potentially disruptive effects on
network operation, for example: network operation, for example:
o Changing of gBondEthPortConfTable configuration paratemers (e.g. o Changing of gBondEthPortConfTable configuration paratemers (e.g.
gBondEthTcAdminType) MAY lead to a complete service interruption, gBondEthTcAdminType) MAY lead to a complete service interruption,
in case the specified PTM-TC encapsulation type is not supported in case the specified PTM-TC encapsulation type is not supported
by the remote end. by the remote end.
o Changing of gBondEthBceConfTable configuration paratemers (e.g.
gBondEthBceEligibleGroupID) MAY lead to preventing a non-bonded
BCE from being bonded in any bonding group or false advertizement
of bonding eligibility (e.g. between BCEs residing on different
line cards in an application which does not support cross-card
bonding).
The user of the GBOND-ETH-MIB module must therefore be aware that The user of the GBOND-ETH-MIB module must therefore be aware that
support for SET operations in a non-secure environment without proper support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. protection can have a negative effect on network operations.
The readable objects in the GBOND-ETH-MIB module (i.e., those with The readable objects in the GBOND-ETH-MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive in MAX-ACCESS other than not-accessible) may be considered sensitive in
some environments since, collectively, they provide information about some environments since, collectively, they provide information about
the performance of network interfaces and can reveal some aspects of the performance of network interfaces and can reveal some aspects of
their configuration. their configuration.
skipping to change at page 20, line 8 skipping to change at page 48, line 24
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations 8. IANA Considerations
An object identifier for gBondEthMIB MODULE-IDENTITY SHALL be An object identifier for gBondEthMIB MODULE-IDENTITY SHALL be
allocated by IANA in the MIB-2 transmission sub-tree, before this allocated by IANA [1] in the MIB-2 transmission sub-tree, before this
document is published as an RFC. document is published as an RFC.
9. Acknowledgments 9. Acknowledgments
This document was produced by the [ADSLMIB] working group. This document was produced by the [ADSLMIB] working group.
10. References 10. References
10.1. Normative References 10.1. Normative References
skipping to change at page 20, line 34 skipping to change at page 48, line 50
Sense Multiple Access with Collision Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Detection (CSMA/CD) Access Method and
Physical Layer Specifications", IEEE Physical Layer Specifications", IEEE
Std 802.3-2005, December 2005. Std 802.3-2005, December 2005.
[G.998.2] ITU-T, "Ethernet-based multi-pair [G.998.2] ITU-T, "Ethernet-based multi-pair
bonding", ITU-T Recommendation G.998.2, bonding", ITU-T Recommendation G.998.2,
January 2005, <http://www.itu.int/rec/ January 2005, <http://www.itu.int/rec/
T-REC-G.998.2/en>. T-REC-G.998.2/en>.
[G.998.2-Amd2] ITU-T, "Ethernet-based multi-pair
bonding Amendement 2", ITU-T
Recommendation G.998.2/Amd.2,
December 2007, <http://www.itu.int/rec/
T-REC-G.998.2-200712-I!Amd2/en>.
[I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL
multi-pair bonding (G.Bond) MIB",
draft-ietf-adslmib-gbond-mib-04 (work
in progress), May 2009.
[RFC2119] Bradner, S., "Key words for use in RFCs [RFC2119] Bradner, S., "Key words for use in RFCs
to Indicate Requirement Levels", to Indicate Requirement Levels",
BCP 14, RFC 2119, March 1997. BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Structure and J. Schoenwaelder, Ed., "Structure
of Management Information Version 2 of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999. (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed.,
skipping to change at page 21, line 9 skipping to change at page 49, line 36
[RFC2580] McCloghrie, K., Perkins, D., and J. [RFC2580] McCloghrie, K., Perkins, D., and J.
Schoenwaelder, "Conformance Statements Schoenwaelder, "Conformance Statements
for SMIv2", STD 58, RFC 2580, for SMIv2", STD 58, RFC 2580,
April 1999. April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The [RFC2863] McCloghrie, K. and F. Kastenholz, "The
Interfaces Group MIB", RFC 2863, Interfaces Group MIB", RFC 2863,
June 2000. June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., and [RFC3705] Ray, B. and R. Abbi, "High Capacity
B. Stewart, "Introduction and Textual Conventions for MIB Modules
Applicability Statements for Internet- Using Performance History Based on 15
Standard Management Framework", Minute Intervals", RFC 3705,
RFC 3410, December 2002. February 2004.
[WT-159] Morgenstern, M., Beili, E., and N. [TR-159] Beili, E. and M. Morgenstern,
Nair, "Management Framework for xDSL "Management Framework for xDSL
Bonding", DSL Forum technical Bonding", Broadband Forum technical
report WT-159, November 2007. report TR-159, December 2008.
10.2. Informative References 10.2. Informative References
[ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <ht [ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <ht
tp://www.ietf.org/html.charters/ tp://www.ietf.org/html.charters/
adslmib-charter.html>. adslmib-charter.html>.
[G.991.2] ITU-T, "Single-pair High-speed Digital [G.991.2] ITU-T, "Single-pair High-speed Digital
Subscriber Line (SHDSL) transceivers", Subscriber Line (SHDSL) transceivers",
ITU-T Recommendation G.991.2, ITU-T Recommendation G.991.2,
December 2003, <http://www.itu.int/rec/ December 2003, <http://www.itu.int/rec/
T-REC-G.991.2/en>. T-REC-G.991.2/en>.
[G.993.1] ITU-T, "Very High speed Digital [G.993.1] ITU-T, "Very High speed Digital
Subscriber Line transceivers", ITU-T Subscriber Line transceivers", ITU-T
Recommendation G.993.1, June 2004, <htt Recommendation G.993.1, June 2004, <htt
p://www.itu.int/rec/T-REC-G.993.1/en>. p://www.itu.int/rec/T-REC-G.993.1/en>.
[I-D.ietf-adslmib-gbond-mib] Beili, E., Morgenstern, M., and N. [RFC3410] Case, J., Mundy, R., Partain, D., and
Nair, "xDSL multi-pair bonding (G.Bond) B. Stewart, "Introduction and
MIB", draft-ietf-adslmib-gbond-mib-01 Applicability Statements for Internet-
(work in progress), November 2007. Standard Management Framework",
RFC 3410, December 2002.
[IANAifType-MIB] Internet Assigned Numbers Authority [RFC3593] Tesink, K., "Textual Conventions for
(IANA), "IANAifType Textual Convention MIB Modules Using Performance History
definition", <http://www.iana.org/ Based on 15 Minute Intervals",
assignments/ianaiftype-mib>. RFC 3593, September 2003.
[RFC4181] Heard, C., "Guidelines for Authors and [RFC4181] Heard, C., "Guidelines for Authors and
Reviewers of MIB Documents", BCP 111, Reviewers of MIB Documents", BCP 111,
RFC 4181, September 2005. RFC 4181, September 2005.
[RFC4836] Beili, E., "Definitions of Managed
Objects for IEEE 802.3 Medium
Attachment Units (MAUs)", RFC 4836,
April 2007.
[RFC5066] Beili, E., "Ethernet in the First Mile [RFC5066] Beili, E., "Ethernet in the First Mile
Copper (EFMCu) Interfaces MIB", Copper (EFMCu) Interfaces MIB",
RFC 5066, November 2007. RFC 5066, November 2007.
URIs
[1] <http://www.iana.org/>
Authors' Addresses Authors' Addresses
Edward Beili Edward Beili
Actelis Networks Actelis Networks
25 Bazel St. 25 Bazel St.
Petach-Tikva 49103 Petach-Tikva 49103
Israel Israel
Phone: +972-3-924-3491 Phone: +972-3-924-3491
EMail: edward.beili@actelis.com EMail: edward.beili@actelis.com
skipping to change at page 22, line 21 skipping to change at page 51, line 4
Authors' Addresses Authors' Addresses
Edward Beili Edward Beili
Actelis Networks Actelis Networks
25 Bazel St. 25 Bazel St.
Petach-Tikva 49103 Petach-Tikva 49103
Israel Israel
Phone: +972-3-924-3491 Phone: +972-3-924-3491
EMail: edward.beili@actelis.com EMail: edward.beili@actelis.com
Moti Morgenstern Moti Morgenstern
ECI Telecom ECI Telecom
30 Hasivim St. 30 Hasivim St.
Petach-Tikva 49517 Petach-Tikva 49517
Israel Israel
Phone: +972-3-926-6258 Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com EMail: moti.morgenstern@ecitele.com
Full Copyright Statement
Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
 End of changes. 142 change blocks. 
647 lines changed or deleted 2007 lines changed or added

This html diff was produced by rfcdiff 1.40. The latest version is available from http://tools.ietf.org/tools/rfcdiff/