draft-ietf-adslmib-gshdslbis-08.txt   draft-ietf-adslmib-gshdslbis-09.txt 
Network Working Group C. Sikes Network Working Group C. Sikes
Internet-Draft Paradyne Corporation Internet-Draft Paradyne Corporation
Expires: August 25, 2005 B. Ray Expires: September 15, 2005 B. Ray
PESA Switching Systems, Inc. PESA Switching Systems, Inc.
R. Abbi R. Abbi
Alcatel USA Alcatel USA
February 21, 2005 March 14, 2005
Definitions of Managed Objects for G.shdsl.bis Lines Definitions of Managed Objects for G.shdsl.bis Lines
draft-ietf-adslmib-gshdslbis-08.txt draft-ietf-adslmib-gshdslbis-09.txt
Status of this Memo Status of this Memo
This document is an Internet-Draft and is subject to all provisions This document is an Internet-Draft and is subject to all provisions
of Section 3 of RFC 3667. By submitting this Internet-Draft, each of Section 3 of RFC 3667. By submitting this Internet-Draft, each
author represents that any applicable patent or other IPR claims of author represents that any applicable patent or other IPR claims of
which he or she is aware have been or will be disclosed, and any of which he or she is aware have been or will be disclosed, and any of
which he or she become aware will be disclosed, in accordance with which he or she become aware will be disclosed, in accordance with
RFC 3668. RFC 3668.
skipping to change at page 1, line 38 skipping to change at page 1, line 39
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on August 25, 2005. This Internet-Draft will expire on September 15, 2005.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2005). Copyright (C) The Internet Society (2005).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the Internet community. In use with network management protocols in the Internet community. In
particular, it describes objects used for managing High Bit-Rate particular, it describes objects used for managing High Bit-Rate
skipping to change at page 5, line 5 skipping to change at page 5, line 5
The MIB branch identified by this ifType contains tables appropriate The MIB branch identified by this ifType contains tables appropriate
for this interface type. Most such tables extend the ifEntry table, for this interface type. Most such tables extend the ifEntry table,
and are indexed by ifIndex. For interfaces in systems implementing and are indexed by ifIndex. For interfaces in systems implementing
this MIB, those table entries indexed by ifIndex MUST be persistent. this MIB, those table entries indexed by ifIndex MUST be persistent.
The following attributes are part of the mandatory The following attributes are part of the mandatory
ifGeneralInformationGroup in RFC 2863 [RFC2863], and are not ifGeneralInformationGroup in RFC 2863 [RFC2863], and are not
duplicated in the HDSL2/SHDSL Line MIB. duplicated in the HDSL2/SHDSL Line MIB.
================================================================== ===================================================================
ifIndex Interface index. ifIndex Interface index.
ifDescr See interfaces MIB [RFC2863]. ifDescr See interfaces MIB [RFC2863].
ifType hdsl2(168) or shdsl(169). ifType hdsl2(168) or shdsl(169).
ifSpeed Set as appropriate. ifSpeed Set as appropriate.
(This is fixed at 1552000 for HDSL2 (This is fixed at 1552000 for HDSL2
lines) lines)
skipping to change at page 5, line 37 skipping to change at page 5, line 37
ifAlias See interfaces MIB [RFC2863]. ifAlias See interfaces MIB [RFC2863].
ifLinkUpDownTrapEnable Default to enabled(1). ifLinkUpDownTrapEnable Default to enabled(1).
ifHighSpeed Set as appropriate. ifHighSpeed Set as appropriate.
(For HDSL2 lines, this is fixed at 2) (For HDSL2 lines, this is fixed at 2)
ifConnectorPresent Set as appropriate. ifConnectorPresent Set as appropriate.
================================================================== ===================================================================
Figure 1: Use of ifTable Objects Figure 1: Use of ifTable Objects
3.2 IANA Considerations 3.2 IANA Considerations
The HDSL2-SHDSL-LINE-MIB module requires the allocation of a single The HDSL2-SHDSL-LINE-MIB module requires the allocation of a single
object identifier for its MODULE-IDENTITY. The IANA has allocated object identifier for its MODULE-IDENTITY. The IANA has allocated
this object identifier in the transmission subtree (48), defined in this object identifier in the transmission subtree (48), defined in
the SNMPv2-SMI MIB module. the SNMPv2-SMI MIB module.
The assignment was in fact done when RFC 3276 was published, and this The assignment was in fact done when RFC 3276 was published, and this
skipping to change at page 15, line 36 skipping to change at page 15, line 36
PerfIntervalCount PerfIntervalCount
FROM PerfHist-TC-MIB FROM PerfHist-TC-MIB
SnmpAdminString SnmpAdminString
FROM SNMP-FRAMEWORK-MIB FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
hdsl2ShdslMIB MODULE-IDENTITY hdsl2ShdslMIB MODULE-IDENTITY
LAST-UPDATED "200502210000Z" -- February 21, 2005 LAST-UPDATED "200503140000Z" -- March 14, 2005
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
WG-URL: WG-URL:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-7324 USA Raleigh NC 27627-7324 USA
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
skipping to change at page 16, line 40 skipping to change at page 16, line 40
HDSL2/SHDSL lines. An agent may reside at either end of the HDSL2/SHDSL lines. An agent may reside at either end of the
line, however the MIB is designed to require no management line, however the MIB is designed to require no management
communication between the modems beyond that inherent in the communication between the modems beyond that inherent in the
low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 low-level EOC line protocol as defined in ANSI T1E1.4/2000-006
(for HDSL2 lines), or in ITU G.991.2 (for SHDSL lines). (for HDSL2 lines), or in ITU G.991.2 (for SHDSL lines).
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2005). This version of
this MIB module is part of RFC xxxx; see the RFC itself for this MIB module is part of RFC xxxx; see the RFC itself for
full legal notices." full legal notices."
REVISION "200502210000Z" -- February 21, 2005 REVISION "200503140000Z" -- March 14, 2005
DESCRIPTION "This version, published as RFC xxxx. DESCRIPTION "This version, published as RFC xxxx.
The following changes have been made in this version: The following changes have been made in this version:
1. Added a 3rd and 4th wire pair. 1. Added a 3rd and 4th wire pair.
2. Modified all rates such that their rates are only 2. Modified all rates such that their rates are only
constrained by an unsigned 32-bit value and not by constrained by an unsigned 32-bit value and not by
what today's perceived technology limitations are. what today's perceived technology limitations are.
3. Clarified that the rates from RFC 3276 include 3. Clarified that the rates from RFC 3276 include
payload and any applicable framing and added payload and any applicable framing and added
objects for payload-only rates. objects for payload-only rates.
4. Added an object to indicate whether or not the 4. Added an object to indicate whether or not the
skipping to change at page 20, line 47 skipping to change at page 20, line 47
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslSpanConfTable. Each entry "An entry in the hdsl2ShdslSpanConfTable. Each entry
represents the complete Span in a single HDSL2/SHDSL line. represents the complete Span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL It is indexed by the ifIndex of the associated HDSL2/SHDSL
line." line."
INDEX { ifIndex } INDEX { ifIndex }
::= { hdsl2ShdslSpanConfTable 1 } ::= { hdsl2ShdslSpanConfTable 1 }
Hdsl2ShdslSpanConfEntry :: Hdsl2ShdslSpanConfEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslSpanConfNumRepeaters Unsigned32, hdsl2ShdslSpanConfNumRepeaters Unsigned32,
hdsl2ShdslSpanConfProfile SnmpAdminString, hdsl2ShdslSpanConfProfile SnmpAdminString,
hdsl2ShdslSpanConfAlarmProfile SnmpAdminString hdsl2ShdslSpanConfAlarmProfile SnmpAdminString
} }
hdsl2ShdslSpanConfNumRepeaters OBJECT-TYPE hdsl2ShdslSpanConfNumRepeaters OBJECT-TYPE
SYNTAX Unsigned32(0..8) SYNTAX Unsigned32(0..8)
UNITS "repeaters" UNITS "repeaters"
skipping to change at page 22, line 36 skipping to change at page 22, line 36
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslSpanStatusTable. Each entry "An entry in the hdsl2ShdslSpanStatusTable. Each entry
represents the complete span in a single HDSL2/SHDSL line. represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL It is indexed by the ifIndex of the associated HDSL2/SHDSL
line." line."
INDEX { ifIndex } INDEX { ifIndex }
::= { hdsl2ShdslSpanStatusTable 1 } ::= { hdsl2ShdslSpanStatusTable 1 }
Hdsl2ShdslSpanStatusEntry :: Hdsl2ShdslSpanStatusEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslStatusNumAvailRepeaters Unsigned32, hdsl2ShdslStatusNumAvailRepeaters Unsigned32,
hdsl2ShdslStatusMaxAttainableLineRate Unsigned32, hdsl2ShdslStatusMaxAttainableLineRate Unsigned32,
hdsl2ShdslStatusActualLineRate Unsigned32, hdsl2ShdslStatusActualLineRate Unsigned32,
hdsl2ShdslStatusTransmissionModeCurrent hdsl2ShdslStatusTransmissionModeCurrent
Hdsl2ShdslTransmissionModeType, Hdsl2ShdslTransmissionModeType,
hdsl2ShdslStatusMaxAttainablePayloadRate Unsigned32, hdsl2ShdslStatusMaxAttainablePayloadRate Unsigned32,
hdsl2ShdslStatusActualPayloadRate Unsigned32 hdsl2ShdslStatusActualPayloadRate Unsigned32
} }
skipping to change at page 25, line 7 skipping to change at page 25, line 7
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslInventoryTable. Each entry "An entry in the hdsl2ShdslInventoryTable. Each entry
represents inventory information for a single unit in a represents inventory information for a single unit in a
HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
associated unit." associated unit."
INDEX { ifIndex, hdsl2ShdslInvIndex } INDEX { ifIndex, hdsl2ShdslInvIndex }
::= { hdsl2ShdslInventoryTable 1 } ::= { hdsl2ShdslInventoryTable 1 }
Hdsl2ShdslInventoryEntry :: Hdsl2ShdslInventoryEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslInvIndex Hdsl2ShdslUnitId, hdsl2ShdslInvIndex Hdsl2ShdslUnitId,
hdsl2ShdslInvVendorID OCTET STRING, hdsl2ShdslInvVendorID OCTET STRING,
hdsl2ShdslInvVendorModelNumber OCTET STRING, hdsl2ShdslInvVendorModelNumber OCTET STRING,
hdsl2ShdslInvVendorSerialNumber OCTET STRING, hdsl2ShdslInvVendorSerialNumber OCTET STRING,
hdsl2ShdslInvVendorEOCSoftwareVersion Integer32, hdsl2ShdslInvVendorEOCSoftwareVersion Integer32,
hdsl2ShdslInvStandardVersion Integer32, hdsl2ShdslInvStandardVersion Integer32,
hdsl2ShdslInvVendorListNumber OCTET STRING, hdsl2ShdslInvVendorListNumber OCTET STRING,
hdsl2ShdslInvVendorIssueNumber OCTET STRING, hdsl2ShdslInvVendorIssueNumber OCTET STRING,
skipping to change at page 28, line 45 skipping to change at page 28, line 45
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslEndpointConfTable. Each entry "An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in a HDSL2/SHDSL line. represents a single segment endpoint in a HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line, the It is indexed by the ifIndex of the HDSL2/SHDSL line, the
UnitId of the associated unit, the side of the unit, and the UnitId of the associated unit, the side of the unit, and the
wire pair of the associated modem." wire pair of the associated modem."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair} hdsl2ShdslEndpointWirePair}
::= { hdsl2ShdslEndpointConfTable 1 } ::= { hdsl2ShdslEndpointConfTable 1 }
Hdsl2ShdslEndpointConfEntry :: Hdsl2ShdslEndpointConfEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide, hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide,
hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair, hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair,
hdsl2ShdslEndpointAlarmConfProfile SnmpAdminString hdsl2ShdslEndpointAlarmConfProfile SnmpAdminString
} }
hdsl2ShdslEndpointSide OBJECT-TYPE hdsl2ShdslEndpointSide OBJECT-TYPE
SYNTAX Hdsl2ShdslUnitSide SYNTAX Hdsl2ShdslUnitSide
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 30, line 25 skipping to change at page 30, line 25
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslEndpointCurrTable. Each entry "An entry in the hdsl2ShdslEndpointCurrTable. Each entry
contains status and performance information relating to a contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associated unit, the side HDSL2/SHDSL line, the UnitId of the associated unit, the side
of the unit, and the wire pair of the associated modem." of the unit, and the wire pair of the associated modem."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair } hdsl2ShdslEndpointWirePair }
::= { hdsl2ShdslEndpointCurrTable 1 } ::= { hdsl2ShdslEndpointCurrTable 1 }
Hdsl2ShdslEndpointCurrEntry :: Hdsl2ShdslEndpointCurrEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointCurrAtn Integer32, hdsl2ShdslEndpointCurrAtn Integer32,
hdsl2ShdslEndpointCurrSnrMgn Integer32, hdsl2ShdslEndpointCurrSnrMgn Integer32,
hdsl2ShdslEndpointCurrStatus BITS, hdsl2ShdslEndpointCurrStatus BITS,
hdsl2ShdslEndpointES Counter32, hdsl2ShdslEndpointES Counter32,
hdsl2ShdslEndpointSES Counter32, hdsl2ShdslEndpointSES Counter32,
hdsl2ShdslEndpointCRCanomalies Counter32, hdsl2ShdslEndpointCRCanomalies Counter32,
hdsl2ShdslEndpointLOSWS Counter32, hdsl2ShdslEndpointLOSWS Counter32,
hdsl2ShdslEndpointUAS Counter32, hdsl2ShdslEndpointUAS Counter32,
skipping to change at page 37, line 44 skipping to change at page 37, line 44
hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl15MinIntervalEntry SYNTAX Hdsl2Shdsl15MinIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2Shdsl15MinIntervalTable." "An entry in the hdsl2Shdsl15MinIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber} hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
::= { hdsl2Shdsl15MinIntervalTable 1 } ::= { hdsl2Shdsl15MinIntervalTable 1 }
Hdsl2Shdsl15MinIntervalEntry :: Hdsl2Shdsl15MinIntervalEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2Shdsl15MinIntervalNumber Unsigned32, hdsl2Shdsl15MinIntervalNumber Unsigned32,
hdsl2Shdsl15MinIntervalES PerfIntervalCount, hdsl2Shdsl15MinIntervalES PerfIntervalCount,
hdsl2Shdsl15MinIntervalSES PerfIntervalCount, hdsl2Shdsl15MinIntervalSES PerfIntervalCount,
hdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount, hdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount,
hdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount, hdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount,
hdsl2Shdsl15MinIntervalUAS PerfIntervalCount hdsl2Shdsl15MinIntervalUAS PerfIntervalCount
} }
skipping to change at page 39, line 43 skipping to change at page 39, line 43
hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalEntry SYNTAX Hdsl2Shdsl1DayIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2Shdsl1DayIntervalTable." "An entry in the hdsl2Shdsl1DayIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber } hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
::= { hdsl2Shdsl1DayIntervalTable 1 } ::= { hdsl2Shdsl1DayIntervalTable 1 }
Hdsl2Shdsl1DayIntervalEntry :: Hdsl2Shdsl1DayIntervalEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2Shdsl1DayIntervalNumber Unsigned32, hdsl2Shdsl1DayIntervalNumber Unsigned32,
hdsl2Shdsl1DayIntervalMoniSecs Hdsl2ShdslPerfTimeElapsed, hdsl2Shdsl1DayIntervalMoniSecs Hdsl2ShdslPerfTimeElapsed,
hdsl2Shdsl1DayIntervalES Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalES Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalSES Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalSES Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalCRCanomalies Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalCRCanomalies Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalLOSWS Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalLOSWS Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalUAS Hdsl2Shdsl1DayIntervalCount hdsl2Shdsl1DayIntervalUAS Hdsl2Shdsl1DayIntervalCount
} }
skipping to change at page 42, line 15 skipping to change at page 42, line 15
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslEndpointMaintTable. Each entry "An entry in the hdsl2ShdslEndpointMaintTable. Each entry
corresponds to a single segment endpoint, and is indexed by the corresponds to a single segment endpoint, and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit and the side of the unit." unit and the side of the unit."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide } INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide }
::= { hdsl2ShdslEndpointMaintTable 1 } ::= { hdsl2ShdslEndpointMaintTable 1 }
Hdsl2ShdslEndpointMaintEntry :: Hdsl2ShdslEndpointMaintEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslMaintLoopbackConfig INTEGER, hdsl2ShdslMaintLoopbackConfig INTEGER,
hdsl2ShdslMaintTipRingReversal INTEGER, hdsl2ShdslMaintTipRingReversal INTEGER,
hdsl2ShdslMaintPowerBackOff INTEGER, hdsl2ShdslMaintPowerBackOff INTEGER,
hdsl2ShdslMaintSoftRestart INTEGER hdsl2ShdslMaintSoftRestart INTEGER
} }
hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
skipping to change at page 44, line 10 skipping to change at page 44, line 10
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslUnitMaintTable. Each entry "An entry in the hdsl2ShdslUnitMaintTable. Each entry
corresponds to a single unit, and is indexed by the corresponds to a single unit, and is indexed by the
ifIndex of the HDSL2/SHDSL line and the UnitId of the ifIndex of the HDSL2/SHDSL line and the UnitId of the
associated unit." associated unit."
INDEX { ifIndex, hdsl2ShdslInvIndex } INDEX { ifIndex, hdsl2ShdslInvIndex }
::= { hdsl2ShdslUnitMaintTable 1 } ::= { hdsl2ShdslUnitMaintTable 1 }
Hdsl2ShdslUnitMaintEntry :: Hdsl2ShdslUnitMaintEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslMaintLoopbackTimeout Integer32, hdsl2ShdslMaintLoopbackTimeout Integer32,
hdsl2ShdslMaintUnitPowerSource INTEGER hdsl2ShdslMaintUnitPowerSource INTEGER
} }
hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE
SYNTAX Integer32(0..4095) SYNTAX Integer32(0..4095)
UNITS "minutes" UNITS "minutes"
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 45, line 24 skipping to change at page 45, line 24
parameters. The configuration parameters in a profile are parameters. The configuration parameters in a profile are
applied to those lines referencing that profile (see the applied to those lines referencing that profile (see the
hdsl2ShdslSpanConfProfile object). Profiles may be hdsl2ShdslSpanConfProfile object). Profiles may be
created/deleted using the row creation/deletion mechanism created/deleted using the row creation/deletion mechanism
via hdsl2ShdslSpanConfProfileRowStatus. If an active via hdsl2ShdslSpanConfProfileRowStatus. If an active
entry is referenced in hdsl2ShdslSpanConfProfile, the entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed." entry MUST remain active until all references are removed."
INDEX { IMPLIED hdsl2ShdslSpanConfProfileName } INDEX { IMPLIED hdsl2ShdslSpanConfProfileName }
::= { hdsl2ShdslSpanConfProfileTable 1 } ::= { hdsl2ShdslSpanConfProfileTable 1 }
Hdsl2ShdslSpanConfProfileEntry :: Hdsl2ShdslSpanConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslSpanConfProfileName SnmpAdminString, hdsl2ShdslSpanConfProfileName SnmpAdminString,
hdsl2ShdslSpanConfWireInterface INTEGER, hdsl2ShdslSpanConfWireInterface INTEGER,
hdsl2ShdslSpanConfMinLineRate Unsigned32, hdsl2ShdslSpanConfMinLineRate Unsigned32,
hdsl2ShdslSpanConfMaxLineRate Unsigned32, hdsl2ShdslSpanConfMaxLineRate Unsigned32,
hdsl2ShdslSpanConfPSD INTEGER, hdsl2ShdslSpanConfPSD INTEGER,
hdsl2ShdslSpanConfTransmissionMode hdsl2ShdslSpanConfTransmissionMode
Hdsl2ShdslTransmissionModeType, Hdsl2ShdslTransmissionModeType,
hdsl2ShdslSpanConfRemoteEnabled INTEGER, hdsl2ShdslSpanConfRemoteEnabled INTEGER,
skipping to change at page 51, line 23 skipping to change at page 51, line 23
thresholds for various performance attributes monitored at thresholds for various performance attributes monitored at
HDSL2/SHDSL segment endpoints. Profiles may be created/deleted HDSL2/SHDSL segment endpoints. Profiles may be created/deleted
using the row creation/deletion mechanism via using the row creation/deletion mechanism via
hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active
entry is referenced in either hdsl2ShdslSpanConfAlarmProfile entry is referenced in either hdsl2ShdslSpanConfAlarmProfile
or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
active until all references are removed." active until all references are removed."
INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName } INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 } ::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 }
Hdsl2ShdslEndpointAlarmConfProfileEntry :: Hdsl2ShdslEndpointAlarmConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString, hdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString,
hdsl2ShdslEndpointThreshLoopAttenuation Integer32, hdsl2ShdslEndpointThreshLoopAttenuation Integer32,
hdsl2ShdslEndpointThreshSNRMargin Integer32, hdsl2ShdslEndpointThreshSNRMargin Integer32,
hdsl2ShdslEndpointThreshES hdsl2ShdslEndpointThreshES
Hdsl2ShdslPerfIntervalThreshold, Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshSES hdsl2ShdslEndpointThreshSES
Hdsl2ShdslPerfIntervalThreshold, Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshCRCanomalies Integer32, hdsl2ShdslEndpointThreshCRCanomalies Integer32,
skipping to change at page 58, line 42 skipping to change at page 58, line 42
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates impending unit failure due to "This notification indicates impending unit failure due to
loss of local power (last gasp)." loss of local power (last gasp)."
::= { hdsl2ShdslNotifications 16 } ::= { hdsl2ShdslNotifications 16 }
-- conformance information -- conformance information
-- --
hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 3 } hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 3 }
hdsl2ShdslGroups OBJECT IDENTIFIER :: hdsl2ShdslGroups OBJECT IDENTIFIER ::=
{ hdsl2ShdslConformance 1 } { hdsl2ShdslConformance 1 }
hdsl2ShdslCompliances OBJECT IDENTIFIER :: hdsl2ShdslCompliances OBJECT IDENTIFIER ::=
{ hdsl2ShdslConformance 2 } { hdsl2ShdslConformance 2 }
-- agent compliance statements -- agent compliance statements
hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The section outlines compliance requirements for this MIB." "The section outlines compliance requirements for this MIB."
MODULE MODULE
MANDATORY-GROUPS MANDATORY-GROUPS
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/