draft-ietf-pce-pcep-mib-09.txt   draft-ietf-pce-pcep-mib-10.txt 
PCE Working Group A. Koushik PCE Working Group A. Koushik
Internet-Draft Cisco Systems, Inc. Internet-Draft Brocade Communications Inc.
Intended status: Standards Track E. Stephan Intended status: Standards Track E. Stephan
Expires: January 26, 2015 Orange Expires: March 27, 2015 Orange
Q. Zhao Q. Zhao
Huawei Technology Huawei Technology
D. King D. King
Old Dog Consulting Old Dog Consulting
J. Hardwick J. Hardwick
Metaswitch Metaswitch
July 25, 2014 September 23, 2014
Path Computation Element Protocol (PCEP) Management Information Base Path Computation Element Communications Protocol (PCEP) Management
draft-ietf-pce-pcep-mib-09 Information Base (MIB) Module
draft-ietf-pce-pcep-mib-10
Abstract Abstract
This memo defines a portion of the Management Information Base for This memo defines a portion of the Management Information Base (MIB)
use with network management protocols in the Internet community. In for use with network management protocols in the Internet community.
particular, it describes managed objects for modeling of Path In particular, it describes managed objects for modeling of Path
Computation Element communication Protocol (PCEP) for communications Computation Element communications Protocol (PCEP) for communications
between a Path Computation Client (PCC) and a Path Computation between a Path Computation Client (PCC) and a Path Computation
Element (PCE), or between two PCEs. Element (PCE), or between two PCEs.
Status of This Memo Status of This Memo
This Internet-Draft is submitted in full conformance with the This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79. provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 26, 2015. This Internet-Draft will expire on March 27, 2015.
Copyright Notice Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. described in the Simplified BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Requirements Language . . . . . . . . . . . . . . . . . . 3
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. The Internet-Standard Management Framework . . . . . . . . . 3 2. The Internet-Standard Management Framework . . . . . . . . . 3
3. Requirements Language . . . . . . . . . . . . . . . . . . . . 3 3. PCEP MIB Module Architecture . . . . . . . . . . . . . . . . 4
4. PCEP MIB Module Architecture . . . . . . . . . . . . . . . . 3 3.1. pcePcepEntityTable . . . . . . . . . . . . . . . . . . . 4
4.1. pcePcepEntityTable . . . . . . . . . . . . . . . . . . . 3 3.2. pcePcepPeerTable . . . . . . . . . . . . . . . . . . . . 5
4.2. pcePcepPeerTable . . . . . . . . . . . . . . . . . . . . 4 3.3. pcePcepSessTable . . . . . . . . . . . . . . . . . . . . 5
4.3. pcePcepSessTable . . . . . . . . . . . . . . . . . . . . 4 3.4. PCEP Notifications . . . . . . . . . . . . . . . . . . . 6
4.4. PCEP Notifications . . . . . . . . . . . . . . . . . . . 4 3.5. Relationship to other MIB modules . . . . . . . . . . . . 6
4.5. Relationship to other MIB modules . . . . . . . . . . . . 5 3.6. Illustrative example . . . . . . . . . . . . . . . . . . 6
5. Object Definitions . . . . . . . . . . . . . . . . . . . . . 5 4. Object Definitions . . . . . . . . . . . . . . . . . . . . . 7
5.1. PCE-PCEP-MIB . . . . . . . . . . . . . . . . . . . . . . 5 4.1. PCE-PCEP-MIB . . . . . . . . . . . . . . . . . . . . . . 7
6. Security Considerations . . . . . . . . . . . . . . . . . . . 44 5. Security Considerations . . . . . . . . . . . . . . . . . . . 48
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 45 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 49
8. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 45 7. Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . 49
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 45 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 49
9.1. Normative References . . . . . . . . . . . . . . . . . . 45 8.1. Normative References . . . . . . . . . . . . . . . . . . 49
9.2. Informative References . . . . . . . . . . . . . . . . . 46 8.2. Informative References . . . . . . . . . . . . . . . . . 50
Appendix A. Acknowledgement . . . . . . . . . . . . . . . . . . 47 Appendix A. Contributors . . . . . . . . . . . . . . . . . . . . 51
Appendix B. PCEP MIB Module Example . . . . . . . . . . . . . . 51
B.1. Contents of PCEP MIB module at PCE2 . . . . . . . . . . . 51
B.2. Contents of PCEP MIB module at PCCb . . . . . . . . . . . 59
1. Introduction 1. Introduction
The Path Computation Element (PCE) defined in [RFC4655] is an entity The Path Computation Element (PCE) defined in [RFC4655] is an entity
that is capable of computing a network path or route based on a that is capable of computing a network path or route based on a
network graph, and applying computational constraints. A Path network graph, and applying computational constraints. A Path
Computation Client (PCC) may make requests to a PCE for paths to be Computation Client (PCC) may make requests to a PCE for paths to be
computed. computed.
The PCE communication protocol (PCEP) is the communication protocol PCEP is the communication protocol between a PCC and PCE and is
between a PCC and PCE for point-to-point (P2P) path computations and defined in [RFC5440]. PCEP interactions include path computation
is defined in [RFC5440]. Such PCEP communication interactions requests and path computation replies as well as notifications of
include path computation requests and path computation replies as specific states related to the use of a PCE in the context of
well as notifications of specific states related to the use of a PCE Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS)
in the context of Multiprotocol Label Switching (MPLS) and Traffic Engineering (TE).
Generalized MPLS (GMPLS) Traffic Engineering.
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it defines a MIB module that can be used to monitor In particular, it defines a MIB module that can be used to monitor
PCEP communications between a PCC and a PCE, or between two PCEs. PCEP interactions between a PCC and a PCE, or between two PCEs.
The scope of this document is to provide a MIB module for the PCEP
base protocol defined in [RFC5440]. Extensions to the PCEP base
protocol are beyond the scope for this document.
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY" and "OPTIONAL" in this
document are to be interpreted as described in BCP 14, RFC 2119
[RFC2119].
1.2. Terminology
This document uses the terminology defined in [RFC4655] and This document uses the terminology defined in [RFC4655] and
[RFC5440]. [RFC5440]. In particular, it uses the following acronyms.
o Path Computation Request message (PCReq).
o Path Computation Reply message (PCRep).
o Notification message (PCNtf).
o Error message (PCErr).
o Request Parameters object (RP).
o Synchronization Vector object (SVEC).
o Explicit Route object (ERO).
This document uses the term "PCEP entity" to refer to a local PCEP
speaker, "peer" to refer to a remote PCEP speaker and "PCEP speaker"
where it is not necessary to distinguish between local and remote.
2. The Internet-Standard Management Framework 2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58, module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580
[RFC2580]. [RFC2580].
3. Requirements Language 3. PCEP MIB Module Architecture
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY" and
"OPTIONAL" in this document are to be interpreted as described in BCP
14, RFC 2119 [RFC2119].
4. PCEP MIB Module Architecture
The PCEP MIB contains the following information: The PCEP MIB module contains the following information:
a. PCE and PCC entity status (see pcePcepEntityTable). a. PCE and PCC local entity status (see pcePcepEntityTable).
b. PCEP peer information (see pcePcepPeerTable). b. PCEP peer information (see pcePcepPeerTable).
c. PCEP session information (see pcePcepSessTable). c. PCEP session information (see pcePcepSessTable).
d. Notifications to indicate PCEP session changes. d. Notifications to indicate PCEP session changes.
4.1. pcePcepEntityTable The PCEP MIB module is limited to "read-only" access except for
pcePcepNotificationsMaxRate, which is used to throttle the rate at
which the implementation generates notifications.
The pcePcepEntityTable contains one row for each PCEP-speaking entity 3.1. pcePcepEntityTable
(PCC or PCE). Each row is read-only and contains current status
information plus the running configuration of the PCEP-speaking
entity.
4.2. pcePcepPeerTable The PCEP MIB module may contain status information for multiple
logical local PCEP entities. There are several scenarios in which
there may be more than one local PCEP entity, including the
following.
The pcePcepPeerTable contains one row for each PCEP peer that the o A physical router, which is partitioned into multiple virtual
PCEP entity (PCE or PCC) knows about. Each row is read-only and routers, each with its own PCC.
contains information to identify the peer, the running configuration
relating to that peer and statistics that track the messages o A PCE device which front-ends a cluster of compute resources, each
exchanged with that peer and its response times. with a different set of capabilities that are accessed via
different IP addresses.
The pcePcepEntityTable contains one row for each local PCEP entity.
Each row is read-only and contains current status information plus
the PCEP entity's running configuration.
The pcePcepEntityTable is indexed by pcePcepEntityIndex, which also
acts as the primary index for the other tables in this MIB module.
3.2. pcePcepPeerTable
The pcePcepPeerTable contains one row for each peer that the local
PCEP entity knows about. Each row is read-only and contains
information to identify the peer, the running configuration relating
to that peer and statistics that track the messages exchanged with
that peer and its response times.
A PCEP speaker is identified by its IP address. If there is a PCEP
speaker in the network that uses multiple IP addresses then it looks
like multiple distinct peers to the other PCEP speakers in the
network.
The pcePcepPeerTable is indexed first by pcePcepEntityIndex, then by
pcePcepPeerAddrType and pcePcepPeerAddr. This indexing structure
allows each local PCEP entity to report its own set of peers.
Since PCEP sessions can be ephemeral, the pcePcepPeerTable tracks a Since PCEP sessions can be ephemeral, the pcePcepPeerTable tracks a
peer even when no PCEP session currently exists to that peer. The peer even when no PCEP session currently exists to that peer. The
statistics contained in pcePcepPeerTable are an aggregate of the statistics contained in pcePcepPeerTable are an aggregate of the
statistics for all successive sessions to that peer. statistics for all successive sessions to that peer.
To limit the quantity of information that is stored, an To limit the quantity of information that is stored, an
implementation MAY choose to discard a row from the implementation MAY choose to discard a row from the
pcePcepPeerTable if and only if no PCEP session exists to the pcePcepPeerTable if and only if no PCEP session exists to the
corresponding peer. corresponding peer.
4.3. pcePcepSessTable 3.3. pcePcepSessTable
The pcePcepSessTable contains one row for each PCEP session that the The pcePcepSessTable contains one row for each PCEP session that the
PCEP entity (PCE or PCC) is currently participating in. Each row is PCEP entity (PCE or PCC) is currently participating in. Each row is
read-only and contains the running configuration that is applied to read-only and contains the running configuration that is applied to
the session, plus identifiers and statistics for the session. the session, plus identifiers and statistics for the session.
The statistics in pcePcepSessTable are semantically different from The statistics in pcePcepSessTable are semantically different from
those in pcePcepPeerTable since the former apply to the current those in pcePcepPeerTable since the former apply to the current
session only, whereas the latter are the aggregate for all sessions session only, whereas the latter are the aggregate for all sessions
that have existed to that peer. that have existed to that peer.
Although [RFC5440] forbids there from being more than one active PCEP Although [RFC5440] forbids there from being more than one active PCEP
session between a given pair of PCEP entities at any one time, there session between a given pair of PCEP entities at any one time, there
is a window during session establishment where the is a window during session establishment where the
pcePcepSessTable may contain two rows for a given peer, one pcePcepSessTable may contain two rows for a given peer, one
representing a session initiated by the local PCEP speaker and one representing a session initiated by the local PCEP entity and one
representing a session initiated by the remote PCEP speaker. If representing a session initiated by the peer. If either of these
either of these sessions reaches active state, then the other is sessions reaches active state, then the other is discarded.
discarded.
4.4. PCEP Notifications The pcePcepSessTable is indexed first by pcePcepEntityIndex, then by
pcePcepPeerAddrType and pcePcepPeerAddr, and finally by
pcePcepSessInitiator. This indexing structure allows each local PCEP
entity to report its own set of active sessions. The
pcePcepSessInitiator index allows two rows to exist transiently for a
given peer, as discussed above.
The PCEP MIB contains notifications for the following conditions. 3.4. PCEP Notifications
The PCEP MIB module contains notifications for the following
conditions.
a. pcePcepSessUp: PCEP Session has gone up. a. pcePcepSessUp: PCEP Session has gone up.
b. pcePcepSessDown: PCEP Session has gone down. b. pcePcepSessDown: PCEP Session has gone down.
c. pcePcepSessLocalOverload: Local PCEP entity has sent an overload c. pcePcepSessLocalOverload: Local PCEP entity has sent an overload
PCNtf on this session. PCNtf on this session.
d. pcePcepSessLocalOverloadClear: Local PCEP entity has sent an d. pcePcepSessLocalOverloadClear: Local PCEP entity has sent an
overload-cleared PCNtf on this session. overload-cleared PCNtf on this session.
e. pcePcepSessPeerOverload: Remote PCEP entity has sent an overload e. pcePcepSessPeerOverload: Peer has sent an overload PCNtf on this
PCNtf on this session. session.
f. pcePcepSessPeerOverloadClear: Remote PCEP entity has sent an f. pcePcepSessPeerOverloadClear: Peer has sent an overload-cleared
overload-cleared PCNtf on this session. PCNtf on this session.
4.5. Relationship to other MIB modules 3.5. Relationship to other MIB modules
The PCEP MIB imports the following textual conventions from the INET- The PCEP MIB module imports the following textual conventions from
ADDRESS-MIB defined in RFC 4001 [RFC4001]: the INET-ADDRESS-MIB defined in RFC 4001 [RFC4001]:
o InetAddressType o InetAddressType
o InetAddress o InetAddress
PCEP relies on existing protocols which have specialized MIB objects PCEP relies on existing protocols which have specialized MIB objects
to monitor their own activities. Consequently this document to monitor their own activities. Consequently this document
considers that the monitoring of underlying protocols is out of scope considers that the monitoring of underlying protocols is out of scope
of the PCEP MIB module. of the PCEP MIB module.
5. Object Definitions 3.6. Illustrative example
5.1. PCE-PCEP-MIB The following diagram illustrates the relationships between the
pcePcepEntityTable, pcePcepPeerTable and pcePcepSessTable.
Index by:
pcePcepEntityIndex
+--------------+ Index by:
|pcePcepEntity | pcePcepEntityIndex,
|Table | pcePcepPeerAddrType,
+--------------+ pcePcepPeerAddr
|pcePcepEntity |
|Entry |<----*
+--------------+ | +------------+ Index by:
| | | |pcePcepPeer | pcePcepEntityIndex,
| |<-* | |Table | pcePcepPeerAddrType,
+--------------+ | | +------------+ pcePcepPeerAddr,
| *--|PcePcepPeer | pcePcepSessInitiator
| | |Entry |<-----*
| | +------------+ | +------------+
| *--| | | |pcePcepSess |
| | |<----*| |Table |
| +------------+ || +------------+
*-----| | |*-|pcePcepSess |
| | |<--* | |Entry |
| +------------+ | | +------------+
*-----| | | *--| |
| [1] | | | |
+------------+ | +------------+
*----| |
| | |
| +------------+
*----| [2] |
| |
+------------+
[1]: A peer entry with no current session
[2]: Two sessions exist during a window in session
initialization.
4. Object Definitions
4.1. PCE-PCEP-MIB
PCE-PCEP-MIB DEFINITIONS ::= BEGIN PCE-PCEP-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
mib-2, mib-2,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
Unsigned32, Unsigned32,
Counter32 Counter32
skipping to change at page 6, line 9 skipping to change at page 8, line 19
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580 FROM SNMPv2-CONF -- RFC 2580
InetAddressType, InetAddressType,
InetAddress InetAddress
FROM INET-ADDRESS-MIB; -- RFC 4001 FROM INET-ADDRESS-MIB; -- RFC 4001
pcePcepMIB MODULE-IDENTITY pcePcepMIB MODULE-IDENTITY
LAST-UPDATED LAST-UPDATED
"201407251200Z" -- 25 July 2014 "201409121200Z" -- 12 September 2014
ORGANIZATION ORGANIZATION
"IETF Path Computation Element (PCE) Working Group" "IETF Path Computation Element (PCE) Working Group"
CONTACT-INFO CONTACT-INFO
"Email: pce@ietf.org "Email: pce@ietf.org
WG charter: WG charter:
http://www.ietf.org/html.charters/pce-charter.html" http://www.ietf.org/html.charters/pce-charter.html"
DESCRIPTION DESCRIPTION
"This MIB module defines a collection of objects for managing "This MIB module defines a collection of objects for managing
PCE communication protocol (PCEP). Path Computation Element communications Protocol (PCEP).
Copyright (C) The IETF Trust (2014). This version of this Copyright (C) The IETF Trust (2014). This version of this
MIB module is part of RFC YYYY; see the RFC itself for full MIB module is part of RFC YYYY; see the RFC itself for full
legal notices." legal notices."
-- RFC Ed,: replace YYYY with actual RFC number & remove this note -- RFC Ed,: replace YYYY with actual RFC number & remove this note
REVISION REVISION
"201407251200Z" -- 25 July 2014 "201409121200Z" -- 12 September 2014
DESCRIPTION DESCRIPTION
"Initial version, published as RFC YYYY." "Initial version, published as RFC YYYY."
-- RFC Ed.: replace YYYY with actual RFC number & remove this note -- RFC Ed.: replace YYYY with actual RFC number & remove this note
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed.: replace XXX with IANA-assigned number & remove this note -- RFC Ed.: replace XXX with IANA-assigned number & remove this note
pcePcepNotifications OBJECT IDENTIFIER ::= { pcePcepMIB 0 } pcePcepNotifications OBJECT IDENTIFIER ::= { pcePcepMIB 0 }
pcePcepObjects OBJECT IDENTIFIER ::= { pcePcepMIB 1 } pcePcepObjects OBJECT IDENTIFIER ::= { pcePcepMIB 1 }
pcePcepConformance OBJECT IDENTIFIER ::= { pcePcepMIB 2 } pcePcepConformance OBJECT IDENTIFIER ::= { pcePcepMIB 2 }
pcePcepEntityObjects OBJECT IDENTIFIER ::= { pcePcepObjects 1 }
-- --
-- PCE Entity Objects -- PCEP Entity Objects
-- --
pcePcepEntityTable OBJECT-TYPE pcePcepEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepEntityEntry SYNTAX SEQUENCE OF PcePcepEntityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains information about PCEP Entities." "This table contains information about local PCEP entities.
::= { pcePcepEntityObjects 1 } The entries in this table are read-only."
::= { pcePcepObjects 1 }
pcePcepEntityEntry OBJECT-TYPE pcePcepEntityEntry OBJECT-TYPE
SYNTAX PcePcepEntityEntry SYNTAX PcePcepEntityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in this table represents a PCEP entity." "This entry represents a local PCEP entity."
INDEX { pcePcepEntityIndex } INDEX { pcePcepEntityIndex }
::= { pcePcepEntityTable 1 } ::= { pcePcepEntityTable 1 }
PcePcepEntityEntry ::= SEQUENCE { PcePcepEntityEntry ::= SEQUENCE {
pcePcepEntityIndex Unsigned32, pcePcepEntityIndex Unsigned32,
pcePcepEntityAdminStatus INTEGER, pcePcepEntityAdminStatus INTEGER,
pcePcepEntityOperStatus INTEGER, pcePcepEntityOperStatus INTEGER,
pcePcepEntityAddrType InetAddressType, pcePcepEntityAddrType InetAddressType,
pcePcepEntityAddr InetAddress, pcePcepEntityAddr InetAddress,
pcePcepEntityConnectTimer Unsigned32, pcePcepEntityConnectTimer Unsigned32,
pcePcepEntityConnectMaxRetry Unsigned32, pcePcepEntityConnectMaxRetry Unsigned32,
pcePcepEntityInitBackoffTimer Unsigned32,
pcePcepEntityMaxBackoffTimer Unsigned32,
pcePcepEntityOpenWaitTimer Unsigned32, pcePcepEntityOpenWaitTimer Unsigned32,
pcePcepEntityKeepWaitTimer Unsigned32, pcePcepEntityKeepWaitTimer Unsigned32,
pcePcepEntityKeepAliveTimer Unsigned32, pcePcepEntityKeepAliveTimer Unsigned32,
pcePcepEntityDeadTimer Unsigned32, pcePcepEntityDeadTimer Unsigned32,
pcePcepEntityAllowNegotiation TruthValue,
pcePcepEntityMaxKeepAliveTimer Unsigned32, pcePcepEntityMaxKeepAliveTimer Unsigned32,
pcePcepEntityMaxDeadTimer Unsigned32, pcePcepEntityMaxDeadTimer Unsigned32,
pcePcepEntityAllowNegotiation TruthValue,
pcePcepEntityMinKeepAliveTimer Unsigned32, pcePcepEntityMinKeepAliveTimer Unsigned32,
pcePcepEntityMinDeadTimer Unsigned32, pcePcepEntityMinDeadTimer Unsigned32,
pcePcepEntitySyncTimer Unsigned32, pcePcepEntitySyncTimer Unsigned32,
pcePcepEntityRequestTimer Unsigned32, pcePcepEntityRequestTimer Unsigned32,
pcePcepEntityInitBackoffTimer Unsigned32,
pcePcepEntityMaxBackoffTimer Unsigned32,
pcePcepEntityMaxSessions Unsigned32, pcePcepEntityMaxSessions Unsigned32,
pcePcepEntityMaxUnknownReqs Unsigned32, pcePcepEntityMaxUnknownReqs Unsigned32,
pcePcepEntityMaxUnknownMsgs Unsigned32 pcePcepEntityMaxUnknownMsgs Unsigned32
} }
pcePcepEntityIndex OBJECT-TYPE pcePcepEntityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647) SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is used to uniquely identify the PCEP entity." "This index is used to uniquely identify the PCEP entity."
::= { pcePcepEntityEntry 1 } ::= { pcePcepEntityEntry 1 }
pcePcepEntityAdminStatus OBJECT-TYPE pcePcepEntityAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
adminStatusUp(1), adminStatusUp(1),
adminStatusDown(2) adminStatusDown(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status of this PCEP Entity." "The administrative status of this PCEP Entity.
This is the desired operational status as currently set by
an operator or by default in the implementation. The value
of pcePcepEntityOperStatus represents the current status of
an attempt to reach this desired status."
::= { pcePcepEntityEntry 2 } ::= { pcePcepEntityEntry 2 }
pcePcepEntityOperStatus OBJECT-TYPE pcePcepEntityOperStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
operStatusUp(1), operStatusUp(1),
operStatusDown(2), operStatusDown(2),
operStatusGoingUp(3), operStatusGoingUp(3),
operStatusGoingDown(4), operStatusGoingDown(4),
operStatusFailed(5), operStatusFailed(5),
operStatusFailedPerm(6) operStatusFailedPerm(6)
skipping to change at page 8, line 39 skipping to change at page 11, line 6
will not recover without operator intervention." will not recover without operator intervention."
::= { pcePcepEntityEntry 3 } ::= { pcePcepEntityEntry 3 }
pcePcepEntityAddrType OBJECT-TYPE pcePcepEntityAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the PCEP entity's Internet address. This object "The type of the PCEP entity's Internet address. This object
specifies how the value of the pcePcepEntityAddr object specifies how the value of the pcePcepEntityAddr object
should be interpreted." should be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported."
::= { pcePcepEntityEntry 4 } ::= { pcePcepEntityEntry 4 }
pcePcepEntityAddr OBJECT-TYPE pcePcepEntityAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local Internet address of this PCEP entity. The type is "The local Internet address of this PCEP entity. The type is
given by pcePcepEntityAddrType. given by pcePcepEntityAddrType.
skipping to change at page 9, line 19 skipping to change at page 11, line 35
TCP connections." TCP connections."
::= { pcePcepEntityEntry 5 } ::= { pcePcepEntityEntry 5 }
pcePcepEntityConnectTimer OBJECT-TYPE pcePcepEntityConnectTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to establish a TCP "The time that the PCEP entity will wait to establish a TCP
connection with a PCEP peer. If a TCP connection is not connection with a peer. If a TCP connection is not
established within this time then PCEP aborts the session established within this time then PCEP aborts the session
setup attempt." setup attempt."
::= { pcePcepEntityEntry 6 } ::= { pcePcepEntityEntry 6 }
pcePcepEntityConnectMaxRetry OBJECT-TYPE pcePcepEntityConnectMaxRetry OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of times the system tries to establish "The maximum number of times the system tries to establish
a TCP connection to a peer before going back to the Idle a TCP connection to a peer before the session with the peer
state." transitions to the idle state.
When the session transitions to the idle state:
- pcePcepPeerSessionExists transitions to false(2)
- the associated PcePcepSessEntry is deleted
- a backoff timer runs before the session is tried again."
::= { pcePcepEntityEntry 7 } ::= { pcePcepEntityEntry 7 }
pcePcepEntityInitBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial back-off time for retrying a failed session
setup attempt to a peer.
The back-off time increases for each failed session setup
attempt, until a maximum back-off time is reached. The
maximum back-off time is pcePcepEntityMaxBackoffTimer."
::= { pcePcepEntityEntry 8 }
pcePcepEntityMaxBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum back-off time for retrying a failed session
setup attempt to a peer.
The back-off time increases for each failed session setup
attempt, until this maximum value is reached. Session
setup attempts then repeat periodically without any
further increase in back-off time."
::= { pcePcepEntityEntry 9 }
pcePcepEntityOpenWaitTimer OBJECT-TYPE pcePcepEntityOpenWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to receive an Open "The time that the PCEP entity will wait to receive an Open
message from a PCEP peer. If no Open message is received message from a peer after the TCP connection has come up.
within this time then PCEP aborts the session setup If no Open message is received within this time then PCEP
attempt." terminates the TCP connection and deletes the associated
::= { pcePcepEntityEntry 8 } PcePcepSessEntry."
::= { pcePcepEntityEntry 10 }
pcePcepEntityKeepWaitTimer OBJECT-TYPE pcePcepEntityKeepWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to receive a "The time that the PCEP entity will wait to receive a
Keepalive or PCErr message from a PCEP peer during session Keepalive or PCErr message from a peer during session
initialization. If no Keepalive or PCErr message is initialization after receiving an Open message. If no
received within this time then PCEP aborts the session setup Keepalive or PCErr message is received within this time then
attempt." PCEP terminates the TCP connection and deletes the
::= { pcePcepEntityEntry 9 } associated PcePcepSessEntry."
::= { pcePcepEntityEntry 11 }
pcePcepEntityKeepAliveTimer OBJECT-TYPE pcePcepEntityKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The keep alive transmission timer that this PCEP entity will "The keep alive transmission timer that this PCEP entity will
propose in the initial OPEN message of each session it is propose in the initial OPEN message of each session it is
involved in. This is the maximum time between two involved in. This is the maximum time between two
consecutive messages sent to a PCEP peer. Zero means that consecutive messages sent to a peer. Zero means that
the PCEP entity prefers not to send Keepalives at all. the PCEP entity prefers not to send Keepalives at all.
Note that the actual Keepalive transmission intervals, in Note that the actual Keepalive transmission intervals, in
either direction of an active PCEP session, are determined either direction of an active PCEP session, are determined
by negotiation between the PCEP peers as specified by RFC by negotiation between the peers as specified by RFC
5440, and so may differ from this configured value. For 5440, and so may differ from this configured value. For
the actually negotiated values (per-session), see the actually negotiated values (per-session), see
pcePcepSessKeepaliveTimer and pcePcepSessKeepaliveTimer and
pcePcepSessPeerKeepaliveTimer." pcePcepSessPeerKeepaliveTimer."
::= { pcePcepEntityEntry 10 } ::= { pcePcepEntityEntry 12 }
pcePcepEntityDeadTimer OBJECT-TYPE pcePcepEntityDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The dead timer that this PCEP entity will propose in the "The dead timer that this PCEP entity will propose in the
initial OPEN message of each session it is involved in. initial OPEN message of each session it is involved in.
This is the time after which a PCEP peer should declare a This is the time after which a peer should declare a
session down if it does not receive any PCEP messages. session down if it does not receive any PCEP messages.
Zero suggests that the peer does not run a dead timer at
all."
::= { pcePcepEntityEntry 13 }
pcePcepEntityDeadTimer is recommended to be 4 times the pcePcepEntityAllowNegotiation OBJECT-TYPE
pcePcepEntityKeepAliveTimer value. Zero means suggesting SYNTAX TruthValue
that the peer does not run a dead timer at all; it is only MAX-ACCESS read-only
allowed when pcePcepEntityKeepAliveTimer is also zero." STATUS current
::= { pcePcepEntityEntry 11 } DESCRIPTION
"Whether the PCEP entity will permit negotiation of session
parameters."
::= { pcePcepEntityEntry 14 }
pcePcepEntityMaxKeepAliveTimer OBJECT-TYPE pcePcepEntityMaxKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum value that this PCEP entity will accept from a "In PCEP session parameter negotiation, the maximum value
peer for the interval between Keepalive transmissions. Zero that this PCEP entity will accept from a peer for the
means that the PCEP entity will allow no Keepalive interval between Keepalive transmissions. Zero means that
transmission at all." the PCEP entity will allow no Keepalive transmission at
::= { pcePcepEntityEntry 12 } all."
::= { pcePcepEntityEntry 15 }
pcePcepEntityMaxDeadTimer OBJECT-TYPE pcePcepEntityMaxDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum value that this PCEP entity will accept from a "In PCEP session parameter negotiation, the maximum value
peer for the Dead timer. Zero means that the PCEP entity that this PCEP entity will accept from a peer for the Dead
will allow not running a Dead timer. timer. Zero means that the PCEP entity will allow not
running a Dead timer."
A Dead timer will not be accepted unless it is both greater ::= { pcePcepEntityEntry 16 }
than the session Keepalive timer and less than this field."
::= { pcePcepEntityEntry 13 }
pcePcepEntityAllowNegotiation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the PCEP entity will permit negotiation of session
parameters."
::= { pcePcepEntityEntry 14 }
pcePcepEntityMinKeepAliveTimer OBJECT-TYPE pcePcepEntityMinKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the minimum value "In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the interval between that this PCEP entity will accept for the interval between
Keepalive transmissions. Zero means that the PCEP entity Keepalive transmissions. Zero means that the PCEP entity
insists on no Keepalive transmission at all." insists on no Keepalive transmission at all."
::= { pcePcepEntityEntry 15 } ::= { pcePcepEntityEntry 17 }
pcePcepEntityMinDeadTimer OBJECT-TYPE pcePcepEntityMinDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the minimum value "In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the Dead timer. Zero that this PCEP entity will accept for the Dead timer. Zero
means that the PCEP entity insists on not running a Dead means that the PCEP entity insists on not running a Dead
timer. timer."
::= { pcePcepEntityEntry 18 }
A Dead timer will not be accepted unless it is both greater
than the session Keepalive timer and greater than this
field."
::= { pcePcepEntityEntry 16 }
pcePcepEntitySyncTimer OBJECT-TYPE pcePcepEntitySyncTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (0..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of SYNC timer is used in the case of synchronized "The value of SyncTimer is used in the case of synchronized
path computation request using the SVEC object. path computation request using the SVEC object.
Consider the case where a PCReq message is received by a PCE Consider the case where a PCReq message is received by a PCE
that contains the SVEC object referring to M synchronized that contains the SVEC object referring to M synchronized
path computation requests. If after the expiration of the path computation requests. If after the expiration of the
SYNC timer all the M path computation requests have not been SyncTimer all the M path computation requests have not been
received, a protocol error is triggered and the PCE MUST received, a protocol error is triggered and the PCE MUST
cancel the whole set of path computation requests. cancel the whole set of path computation requests.
The aim of the SyncTimer is to avoid the storage of unused The aim of the SyncTimer is to avoid the storage of unused
synchronized requests should one of them get lost for some synchronized requests should one of them get lost for some
reasons (for example, a misbehaving PCC)." reasons (for example, a misbehaving PCC).
::= { pcePcepEntityEntry 17 }
A value of zero is returned if and only if the entity does
not use the SyncTimer."
::= { pcePcepEntityEntry 19 }
pcePcepEntityRequestTimer OBJECT-TYPE pcePcepEntityRequestTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum time that the PCEP entity will wait for a "The maximum time that the PCEP entity will wait for a
response to a PCReq message." response to a PCReq message."
::= { pcePcepEntityEntry 18 }
pcePcepEntityInitBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial back-off time for retrying a failed session
setup attempt to a peer.
The back-off time increases for each failed session setup
attempt, until a maximum back-off time is reached. The
maximum back-off time is pcePcepEntityMaxBackoffTimer."
::= { pcePcepEntityEntry 19 }
pcePcepEntityMaxBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum back-off time for retrying a failed session
setup attempt to a peer.
The back-off time increases for each failed session setup
attempt, until this maximum value is reached. Session
setup attempts then repeat periodically without any
further increase in back-off time."
::= { pcePcepEntityEntry 20 } ::= { pcePcepEntityEntry 20 }
pcePcepEntityMaxSessions OBJECT-TYPE pcePcepEntityMaxSessions OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum number of sessions involving this PCEP entity "Maximum number of sessions involving this PCEP entity
that can exist at any time." that can exist at any time."
::= { pcePcepEntityEntry 21 } ::= { pcePcepEntityEntry 21 }
pcePcepEntityMaxUnknownReqs OBJECT-TYPE pcePcepEntityMaxUnknownReqs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of unrecognized requests and replies that "The maximum number of unrecognized requests and replies that
any session on this PCEP entity is willing to accept per any session on this PCEP entity is willing to accept per
minute. minute before terminating the session.
A PCRep message contains an unrecognized reply if it A PCRep message contains an unrecognized reply if it
contains an RP object whose request ID does not correspond contains an RP object whose request ID does not correspond
to any in-progress request sent by this PCEP entity. to any in-progress request sent by this PCEP entity.
A PCReq message contains an unrecognized request if it A PCReq message contains an unrecognized request if it
contains an RP object whose request ID is zero." contains an RP object whose request ID is zero."
::= { pcePcepEntityEntry 22 } ::= { pcePcepEntityEntry 22 }
pcePcepEntityMaxUnknownMsgs OBJECT-TYPE pcePcepEntityMaxUnknownMsgs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of unknown messages that any session "The maximum number of unknown messages that any session
on this PCEP entity is willing to accept per minute." on this PCEP entity is willing to accept per minute before
terminating the session."
::= { pcePcepEntityEntry 23 } ::= { pcePcepEntityEntry 23 }
-- --
-- The PCEP Peer Table -- The PCEP Peer Table
-- --
pcePcepPeerObjects OBJECT IDENTIFIER ::= { pcePcepObjects 2 }
pcePcepPeerTable OBJECT-TYPE pcePcepPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepPeerEntry SYNTAX SEQUENCE OF PcePcepPeerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about PCEP peers known by the local PCEP "This table contains information about peers known by
speaker. the local PCEP entity. The entries in this table are
read-only.
This MIB table gives PCEP peer information that spans PCEP This table gives peer information that spans PCEP
sessions. Information about current PCEP sessions can be sessions. Information about current PCEP sessions can be
found in the pcePcepSessTable MIB table." found in the pcePcepSessTable table."
::= { pcePcepPeerObjects 1 } ::= { pcePcepObjects 2 }
pcePcepPeerEntry OBJECT-TYPE pcePcepPeerEntry OBJECT-TYPE
SYNTAX PcePcepPeerEntry SYNTAX PcePcepPeerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about a single PCEP peer which spans all PCEP "Information about a single peer which spans all PCEP
sessions to that peer. The information contained in a row sessions to that peer."
is read-only."
INDEX { pcePcepEntityIndex, INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType, pcePcepPeerAddrType,
pcePcepPeerAddr } pcePcepPeerAddr }
::= { pcePcepPeerTable 1 } ::= { pcePcepPeerTable 1 }
PcePcepPeerEntry ::= SEQUENCE { PcePcepPeerEntry ::= SEQUENCE {
pcePcepPeerAddrType InetAddressType, pcePcepPeerAddrType InetAddressType,
pcePcepPeerAddr InetAddress, pcePcepPeerAddr InetAddress,
pcePcepPeerRole INTEGER, pcePcepPeerRole INTEGER,
pcePcepPeerDiscontinuityTime TimeStamp, pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession TruthValue, pcePcepPeerInitiateSession TruthValue,
pcePcepPeerSessionExists TruthValue, pcePcepPeerSessionExists TruthValue,
pcePcepPeerNumSessSetupOK Counter32, pcePcepPeerNumSessSetupOK Counter32,
pcePcepPeerNumSessSetupFail Counter32, pcePcepPeerNumSessSetupFail Counter32,
pcePcepPeerSessionUpTime TimeStamp, pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime TimeStamp, pcePcepPeerSessionFailTime TimeStamp,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime Unsigned32, pcePcepPeerAvgRspTime Unsigned32,
pcePcepPeerLWMRspTime Unsigned32, pcePcepPeerLWMRspTime Unsigned32,
pcePcepPeerHWMRspTime Unsigned32, pcePcepPeerHWMRspTime Unsigned32,
pcePcepPeerNumPCReqSent Counter32, pcePcepPeerNumPCReqSent Counter32,
pcePcepPeerNumPCReqRcvd Counter32, pcePcepPeerNumPCReqRcvd Counter32,
pcePcepPeerNumPCRepSent Counter32, pcePcepPeerNumPCRepSent Counter32,
pcePcepPeerNumPCRepRcvd Counter32, pcePcepPeerNumPCRepRcvd Counter32,
pcePcepPeerNumPCErrSent Counter32, pcePcepPeerNumPCErrSent Counter32,
pcePcepPeerNumPCErrRcvd Counter32, pcePcepPeerNumPCErrRcvd Counter32,
pcePcepPeerNumPCNtfSent Counter32, pcePcepPeerNumPCNtfSent Counter32,
pcePcepPeerNumPCNtfRcvd Counter32, pcePcepPeerNumPCNtfRcvd Counter32,
pcePcepPeerNumKeepaliveSent Counter32, pcePcepPeerNumKeepaliveSent Counter32,
pcePcepPeerNumKeepaliveRcvd Counter32, pcePcepPeerNumKeepaliveRcvd Counter32,
pcePcepPeerNumUnknownRcvd Counter32, pcePcepPeerNumUnknownRcvd Counter32,
pcePcepPeerNumCorruptRcvd Counter32,
pcePcepPeerNumReqSent Counter32, pcePcepPeerNumReqSent Counter32,
pcePcepPeerNumSvecSent Counter32, pcePcepPeerNumSvecSent Counter32,
pcePcepPeerNumSvecReqSent Counter32, pcePcepPeerNumSvecReqSent Counter32,
pcePcepPeerNumReqSentPendRep Counter32, pcePcepPeerNumReqSentPendRep Counter32,
pcePcepPeerNumReqSentEroRcvd Counter32, pcePcepPeerNumReqSentEroRcvd Counter32,
pcePcepPeerNumReqSentNoPathRcvd Counter32, pcePcepPeerNumReqSentNoPathRcvd Counter32,
pcePcepPeerNumReqSentCancelRcvd Counter32, pcePcepPeerNumReqSentCancelRcvd Counter32,
pcePcepPeerNumReqSentErrorRcvd Counter32, pcePcepPeerNumReqSentErrorRcvd Counter32,
pcePcepPeerNumReqSentTimeout Counter32, pcePcepPeerNumReqSentTimeout Counter32,
pcePcepPeerNumReqSentCancelSent Counter32, pcePcepPeerNumReqSentCancelSent Counter32,
skipping to change at page 16, line 8 skipping to change at page 18, line 27
pcePcepPeerNumReqRcvdUnknown Counter32 pcePcepPeerNumReqRcvdUnknown Counter32
} }
pcePcepPeerAddrType OBJECT-TYPE pcePcepPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the peer's Internet address. This object "The type of the peer's Internet address. This object
specifies how the value of the pcePcepPeerAddr object should specifies how the value of the pcePcepPeerAddr object should
be interpreted." be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported."
::= { pcePcepPeerEntry 1 } ::= { pcePcepPeerEntry 1 }
pcePcepPeerAddr OBJECT-TYPE pcePcepPeerAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Internet address of the peer. The type is given by "The Internet address of the peer. The type is given by
pcePcepPeerAddrType. " pcePcepPeerAddrType."
::= { pcePcepPeerEntry 2 } ::= { pcePcepPeerEntry 2 }
pcePcepPeerRole OBJECT-TYPE pcePcepPeerRole OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0),
pcc(1), pcc(1),
pce(2), pce(2),
pccAndPce(3), pccAndPce(3)
unknown(4)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The role that this peer took the last time a session was "The role that this peer took the last time a session was
established. Takes one of the following values. established. Takes one of the following values.
- unknown(0): this peer's role is not known.
- pcc(1): this peer is a Path Computation Client (PCC). - pcc(1): this peer is a Path Computation Client (PCC).
- pce(2): this peer is a Path Computation Server (PCE). - pce(2): this peer is a Path Computation Server (PCE).
- pccAndPce(3): this peer is both a PCC and a PCE. - pccAndPce(3): this peer is both a PCC and a PCE."
- unknown(4): this peer's role is not known."
::= { pcePcepPeerEntry 3 } ::= { pcePcepPeerEntry 3 }
pcePcepPeerDiscontinuityTime OBJECT-TYPE pcePcepPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at the time that the information and "The value of sysUpTime at the time that the information and
statistics in this row were last reset." statistics in this row were last reset."
::= { pcePcepPeerEntry 4 } ::= { pcePcepPeerEntry 4 }
pcePcepPeerInitiateSession OBJECT-TYPE pcePcepPeerInitiateSession OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the PCEP Entity initiates sessions to this "Indicates whether the local PCEP entity initiates sessions
peer, or waits for the peer to initiate a session." to this peer, or waits for the peer to initiate a session."
::= { pcePcepPeerEntry 5 } ::= { pcePcepPeerEntry 5 }
pcePcepPeerSessionExists OBJECT-TYPE pcePcepPeerSessionExists OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether a session with this peer currently "Indicates whether a session with this peer currently
exists." exists."
::= { pcePcepPeerEntry 6 } ::= { pcePcepPeerEntry 6 }
skipping to change at page 17, line 34 skipping to change at page 20, line 6
incremented each time a session with this peer is incremented each time a session with this peer is
successfully established." successfully established."
::= { pcePcepPeerEntry 7 } ::= { pcePcepPeerEntry 7 }
pcePcepPeerNumSessSetupFail OBJECT-TYPE pcePcepPeerNumSessSetupFail OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCEP sessions with the peer that have been "The number of PCEP sessions with the peer that have been
attempted but failed before being fully estbalished. attempted but failed before being fully established.
This counter is incremented each time a session with this This counter is incremented each time a session retry to
peer fails before reaching session state pceSessionUp." this peer fails."
::= { pcePcepPeerEntry 8 } ::= { pcePcepPeerEntry 8 }
pcePcepPeerSessionUpTime OBJECT-TYPE pcePcepPeerSessionUpTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime the last time a session with this "The value of sysUpTime the last time a session with this
peer was successfully established. peer was successfully established.
skipping to change at page 18, line 15 skipping to change at page 20, line 35
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime the last time a session with this "The value of sysUpTime the last time a session with this
peer failed to be established. peer failed to be established.
If pcePcepPeerNumSessSetupFail is zero, then this object If pcePcepPeerNumSessSetupFail is zero, then this object
contains zero." contains zero."
::= { pcePcepPeerEntry 10 } ::= { pcePcepPeerEntry 10 }
pcePcepPeerSessionFailUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time a session with this
peer failed from active.
If pcePcepPeerNumSessSetupOK is zero, then this object
contains zero."
::= { pcePcepPeerEntry 11 }
pcePcepPeerAvgRspTime OBJECT-TYPE pcePcepPeerAvgRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The average response time for this peer. "The average response time for this peer.
If an average response time has not been calculated for this If an average response time has not been calculated for this
peer then this object has the value zero. peer then this object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 11 } ::= { pcePcepPeerEntry 12 }
pcePcepPeerLWMRspTime OBJECT-TYPE pcePcepPeerLWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The smallest (low-water mark) response time seen from this "The smallest (low-water mark) response time seen from this
peer. peer.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero. object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 12 } ::= { pcePcepPeerEntry 13 }
pcePcepPeerHWMRspTime OBJECT-TYPE pcePcepPeerHWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The greatest (high-water mark) response time seen from this "The greatest (high-water mark) response time seen from this
peer. peer.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero. object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 13 } ::= { pcePcepPeerEntry 14 }
pcePcepPeerNumPCReqSent OBJECT-TYPE pcePcepPeerNumPCReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages sent to this peer." "The number of PCReq messages sent to this peer."
::= { pcePcepPeerEntry 14 }
::= { pcePcepPeerEntry 15 }
pcePcepPeerNumPCReqRcvd OBJECT-TYPE pcePcepPeerNumPCReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages received from this peer." "The number of PCReq messages received from this peer."
::= { pcePcepPeerEntry 15 } ::= { pcePcepPeerEntry 16 }
pcePcepPeerNumPCRepSent OBJECT-TYPE pcePcepPeerNumPCRepSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages sent to this peer." "The number of PCRep messages sent to this peer."
::= { pcePcepPeerEntry 16 } ::= { pcePcepPeerEntry 17 }
pcePcepPeerNumPCRepRcvd OBJECT-TYPE pcePcepPeerNumPCRepRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages received from this peer." "The number of PCRep messages received from this peer."
::= { pcePcepPeerEntry 17 } ::= { pcePcepPeerEntry 18 }
pcePcepPeerNumPCErrSent OBJECT-TYPE pcePcepPeerNumPCErrSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages sent to this peer." "The number of PCErr messages sent to this peer."
::= { pcePcepPeerEntry 19 }
::= { pcePcepPeerEntry 18 }
pcePcepPeerNumPCErrRcvd OBJECT-TYPE pcePcepPeerNumPCErrRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages received from this peer." "The number of PCErr messages received from this peer."
::= { pcePcepPeerEntry 19 } ::= { pcePcepPeerEntry 20 }
pcePcepPeerNumPCNtfSent OBJECT-TYPE pcePcepPeerNumPCNtfSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages sent to this peer." "The number of PCNtf messages sent to this peer."
::= { pcePcepPeerEntry 20 }
::= { pcePcepPeerEntry 21 }
pcePcepPeerNumPCNtfRcvd OBJECT-TYPE pcePcepPeerNumPCNtfRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages received from this peer." "The number of PCNtf messages received from this peer."
::= { pcePcepPeerEntry 21 } ::= { pcePcepPeerEntry 22 }
pcePcepPeerNumKeepaliveSent OBJECT-TYPE pcePcepPeerNumKeepaliveSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages sent to this peer." "The number of Keepalive messages sent to this peer."
::= { pcePcepPeerEntry 22 } ::= { pcePcepPeerEntry 23 }
pcePcepPeerNumKeepaliveRcvd OBJECT-TYPE pcePcepPeerNumKeepaliveRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages received from this peer." "The number of Keepalive messages received from this peer."
::= { pcePcepPeerEntry 23 } ::= { pcePcepPeerEntry 24 }
pcePcepPeerNumUnknownRcvd OBJECT-TYPE pcePcepPeerNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown messages received from this peer." "The number of unknown messages received from this peer."
::= { pcePcepPeerEntry 25 }
::= { pcePcepPeerEntry 24 } pcePcepPeerNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of corrupted PCEP message received from this
peer."
::= { pcePcepPeerEntry 26 }
pcePcepPeerNumReqSent OBJECT-TYPE pcePcepPeerNumReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent to this peer. A request "The number of requests sent to this peer. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqSent because This might be greater than pcePcepPeerNumPCReqSent because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepPeerEntry 25 } ::= { pcePcepPeerEntry 27 }
pcePcepPeerNumSvecSent OBJECT-TYPE pcePcepPeerNumSvecSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects sent to this peer in PCReq "The number of SVEC objects sent to this peer in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepPeerEntry 26 } ::= { pcePcepPeerEntry 28 }
pcePcepPeerNumSvecReqSent OBJECT-TYPE pcePcepPeerNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent to this peer that appeared in "The number of requests sent to this peer that appeared in
one or more SVEC objects." one or more SVEC objects."
::= { pcePcepPeerEntry 27 } ::= { pcePcepPeerEntry 29 }
pcePcepPeerNumReqSentPendRep OBJECT-TYPE pcePcepPeerNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response is still pending." which a response is still pending."
::= { pcePcepPeerEntry 28 } ::= { pcePcepPeerEntry 30 }
pcePcepPeerNumReqSentEroRcvd OBJECT-TYPE pcePcepPeerNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response with an ERO object was received. Such which a response with an ERO object was received. Such
responses indicate that a path was successfully computed by responses indicate that a path was successfully computed by
the peer." the peer."
::= { pcePcepPeerEntry 29 } ::= { pcePcepPeerEntry 31 }
pcePcepPeerNumReqSentNoPathRcvd OBJECT-TYPE pcePcepPeerNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response with a NO-PATH object was received. Such which a response with a NO-PATH object was received. Such
responses indicate that the peer could not find a path to responses indicate that the peer could not find a path to
satisfy the request." satisfy the request."
::= { pcePcepPeerEntry 30 } ::= { pcePcepPeerEntry 32 }
pcePcepPeerNumReqSentCancelRcvd OBJECT-TYPE pcePcepPeerNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were cancelled by the peer with "The number of requests that were cancelled by the peer with
a PCNtf message. a PCNtf message.
This might be different than pcePcepPeerNumPCNtfRcvd because This might be different than pcePcepPeerNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 31 } ::= { pcePcepPeerEntry 33 }
pcePcepPeerNumReqSentErrorRcvd OBJECT-TYPE pcePcepPeerNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were rejected by the peer with a "The number of requests that were rejected by the peer with a
PCErr message. PCErr message.
This might be different than pcePcepPeerNumPCErrRcvd because This might be different than pcePcepPeerNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 32 } ::= { pcePcepPeerEntry 34 }
pcePcepPeerNumReqSentTimeout OBJECT-TYPE pcePcepPeerNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to a peer and "The number of requests that have been sent to a peer and
have been abandoned because the peer has taken too long to have been abandoned because the peer has taken too long to
respond to them." respond to them."
::= { pcePcepPeerEntry 33 } ::= { pcePcepPeerEntry 35 }
pcePcepPeerNumReqSentCancelSent OBJECT-TYPE pcePcepPeerNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were sent to the peer and "The number of requests that were sent to the peer and
explicitly canceled by the local PCEP speaker sending a explicitly canceled by the local PCEP entity sending a
PCNtf." PCNtf."
::= { pcePcepPeerEntry 34 } ::= { pcePcepPeerEntry 36 }
pcePcepPeerNumReqSentClosed OBJECT-TYPE pcePcepPeerNumReqSentClosed OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were sent to the peer and "The number of requests that were sent to the peer and
implicitly canceled when the session they were sent over was implicitly canceled when the session they were sent over was
closed." closed."
::= { pcePcepPeerEntry 35 } ::= { pcePcepPeerEntry 37 }
pcePcepPeerNumReqRcvd OBJECT-TYPE pcePcepPeerNumReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer. A request "The number of requests received from this peer. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqRcvd because This might be greater than pcePcepPeerNumPCReqRcvd because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepPeerEntry 36 } ::= { pcePcepPeerEntry 38 }
pcePcepPeerNumSvecRcvd OBJECT-TYPE pcePcepPeerNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects received from this peer in PCReq "The number of SVEC objects received from this peer in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepPeerEntry 37 } ::= { pcePcepPeerEntry 39 }
pcePcepPeerNumSvecReqRcvd OBJECT-TYPE pcePcepPeerNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that appeared "The number of requests received from this peer that appeared
in one or more SVEC objects." in one or more SVEC objects."
::= { pcePcepPeerEntry 38 }
::= { pcePcepPeerEntry 40 }
pcePcepPeerNumReqRcvdPendRep OBJECT-TYPE pcePcepPeerNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response is still pending." peer for which a response is still pending."
::= { pcePcepPeerEntry 39 } ::= { pcePcepPeerEntry 41 }
pcePcepPeerNumReqRcvdEroSent OBJECT-TYPE pcePcepPeerNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response with an ERO object was sent. Such peer for which a response with an ERO object was sent. Such
responses indicate that a path was successfully computed by responses indicate that a path was successfully computed by
the local PCEP speaker." the local PCEP entity."
::= { pcePcepPeerEntry 40 } ::= { pcePcepPeerEntry 42 }
pcePcepPeerNumReqRcvdNoPathSent OBJECT-TYPE pcePcepPeerNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response with a NO-PATH object was sent. peer for which a response with a NO-PATH object was sent.
Such responses indicate that the local PCEP speaker could Such responses indicate that the local PCEP entity could
not find a path to satisfy the request." not find a path to satisfy the request."
::= { pcePcepPeerEntry 41 } ::= { pcePcepPeerEntry 43 }
pcePcepPeerNumReqRcvdCancelSent OBJECT-TYPE pcePcepPeerNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that were "The number of requests received from this peer that were
cancelled by the local PCEP speaker sending a PCNtf message. cancelled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepPeerNumPCNtfSent because This might be different than pcePcepPeerNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 42 } ::= { pcePcepPeerEntry 44 }
pcePcepPeerNumReqRcvdErrorSent OBJECT-TYPE pcePcepPeerNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that were "The number of requests received from this peer that were
rejected by the local PCEP speaker sending a PCErr message. rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepPeerNumPCErrSent because This might be different than pcePcepPeerNumPCErrSent because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 43 } ::= { pcePcepPeerEntry 45 }
pcePcepPeerNumReqRcvdCancelRcvd OBJECT-TYPE pcePcepPeerNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received from the peer and "The number of requests that were received from the peer and
explicitly canceled by the peer sending a PCNtf." explicitly canceled by the peer sending a PCNtf."
::= { pcePcepPeerEntry 44 } ::= { pcePcepPeerEntry 46 }
pcePcepPeerNumReqRcvdClosed OBJECT-TYPE pcePcepPeerNumReqRcvdClosed OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received from the peer and "The number of requests that were received from the peer and
implicitly canceled when the session they were received over implicitly canceled when the session they were received over
was closed." was closed."
::= { pcePcepPeerEntry 45 } ::= { pcePcepPeerEntry 47 }
pcePcepPeerNumRepRcvdUnknown OBJECT-TYPE pcePcepPeerNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of responses to unknown requests received from "The number of responses to unknown requests received from
this peer. A response to an unknown request is a response this peer. A response to an unknown request is a response
whose RP object does not contain the request ID of any whose RP object does not contain the request ID of any
request that is currently outstanding on the session." request that is currently outstanding on the session."
::= { pcePcepPeerEntry 46 } ::= { pcePcepPeerEntry 48 }
pcePcepPeerNumReqRcvdUnknown OBJECT-TYPE pcePcepPeerNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown requests that have been received from "The number of unknown requests that have been received from
a peer. An unknown request is a request whose RP object a peer. An unknown request is a request whose RP object
contains a request ID of zero." contains a request ID of zero."
::= { pcePcepPeerEntry 47 } ::= { pcePcepPeerEntry 49 }
-- --
-- The PCEP Sessions Table -- The PCEP Sessions Table
-- --
pcePcepSessObjects OBJECT IDENTIFIER ::= { pcePcepObjects 3 }
pcePcepSessTable OBJECT-TYPE pcePcepSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepSessEntry SYNTAX SEQUENCE OF PcePcepSessEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of PCEP sessions that involve the local PCEP "A table of PCEP sessions that involve the local PCEP
speaker. Each row in this table represents a single entity. Each entry in this table represents a single
session." session. The entries in this table are read-only.
::= { pcePcepSessObjects 1 }
An entry appears in this table when the corresponding PCEP
session transitions out of idle state. If the PCEP session
transitions back into idle state then the corresponding
entry in this table is removed."
::= { pcePcepObjects 3 }
pcePcepSessEntry OBJECT-TYPE pcePcepSessEntry OBJECT-TYPE
SYNTAX PcePcepSessEntry SYNTAX PcePcepSessEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in this table represents a single PCEP session in "This entry represents a single PCEP session in which the
which the local PCEP speaker participates. local PCEP entity participates.
An entry in this table exists only if the corresponding PCEP
session has been initialized by some event, such as manual
user configuration, autodiscovery of a peer, or an incoming
TCP connection.
An entry appears in this table when the corresponding PCEP This entry exists only if the corresponding PCEP session has
session transitions out of idle state. If the PCEP session been initialized by some event, such as manual user
transitions back into idle state then the corresponding configuration, autodiscovery of a peer, or an incoming TCP
entry in this table is removed." connection."
INDEX { pcePcepEntityIndex, INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType, pcePcepPeerAddrType,
pcePcepPeerAddr, pcePcepPeerAddr,
pcePcepSessInitiator } pcePcepSessInitiator }
::= { pcePcepSessTable 1 } ::= { pcePcepSessTable 1 }
PcePcepSessEntry ::= SEQUENCE { PcePcepSessEntry ::= SEQUENCE {
pcePcepSessInitiator INTEGER, pcePcepSessInitiator INTEGER,
pcePcepSessStateLastChange TimeStamp, pcePcepSessStateLastChange TimeStamp,
pcePcepSessState INTEGER, pcePcepSessState INTEGER,
skipping to change at page 27, line 36 skipping to change at page 30, line 27
pcePcepSessNumPCReqRcvd Counter32, pcePcepSessNumPCReqRcvd Counter32,
pcePcepSessNumPCRepSent Counter32, pcePcepSessNumPCRepSent Counter32,
pcePcepSessNumPCRepRcvd Counter32, pcePcepSessNumPCRepRcvd Counter32,
pcePcepSessNumPCErrSent Counter32, pcePcepSessNumPCErrSent Counter32,
pcePcepSessNumPCErrRcvd Counter32, pcePcepSessNumPCErrRcvd Counter32,
pcePcepSessNumPCNtfSent Counter32, pcePcepSessNumPCNtfSent Counter32,
pcePcepSessNumPCNtfRcvd Counter32, pcePcepSessNumPCNtfRcvd Counter32,
pcePcepSessNumKeepaliveSent Counter32, pcePcepSessNumKeepaliveSent Counter32,
pcePcepSessNumKeepaliveRcvd Counter32, pcePcepSessNumKeepaliveRcvd Counter32,
pcePcepSessNumUnknownRcvd Counter32, pcePcepSessNumUnknownRcvd Counter32,
pcePcepSessNumCorruptRcvd Counter32,
pcePcepSessNumReqSent Counter32, pcePcepSessNumReqSent Counter32,
pcePcepSessNumSvecSent Counter32, pcePcepSessNumSvecSent Counter32,
pcePcepSessNumSvecReqSent Counter32, pcePcepSessNumSvecReqSent Counter32,
pcePcepSessNumReqSentPendRep Counter32, pcePcepSessNumReqSentPendRep Counter32,
pcePcepSessNumReqSentEroRcvd Counter32, pcePcepSessNumReqSentEroRcvd Counter32,
pcePcepSessNumReqSentNoPathRcvd Counter32, pcePcepSessNumReqSentNoPathRcvd Counter32,
pcePcepSessNumReqSentCancelRcvd Counter32, pcePcepSessNumReqSentCancelRcvd Counter32,
pcePcepSessNumReqSentErrorRcvd Counter32, pcePcepSessNumReqSentErrorRcvd Counter32,
pcePcepSessNumReqSentTimeout Counter32, pcePcepSessNumReqSentTimeout Counter32,
pcePcepSessNumReqSentCancelSent Counter32, pcePcepSessNumReqSentCancelSent Counter32,
skipping to change at page 28, line 19 skipping to change at page 31, line 12
pcePcepSessInitiator OBJECT-TYPE pcePcepSessInitiator OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
local(1), local(1),
remote(2) remote(2)
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The initiator of the session, that is, whether the TCP "The initiator of the session, that is, whether the TCP
connection was initiated by the local PCEP speaker or the connection was initiated by the local PCEP entity or the
remote PCEP speaker. peer.
There is a window during session initialization where two There is a window during session initialization where two
sessions can exist between a pair of PCEP speakers, each sessions can exist between a pair of PCEP speakers, each
initiated by one of the speakers. One of these sessions is initiated by one of the speakers. One of these sessions is
always discarded before it leaves OpenWait state. However, always discarded before it leaves OpenWait state. However,
before it is discarded, two sessions to the given peer before it is discarded, two sessions to the given peer
appear transiently in the MIB. The sessions are appear transiently in this MIB module. The sessions are
distinguished by who initiated them, and so this field is an distinguished by who initiated them, and so this field is an
index for the pcePcepSessTable." index for the pcePcepSessTable."
::= { pcePcepSessEntry 1 } ::= { pcePcepSessEntry 1 }
pcePcepSessStateLastChange OBJECT-TYPE pcePcepSessStateLastChange OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at the time this session entered its "The value of sysUpTime at the time this session entered its
skipping to change at page 29, line 14 skipping to change at page 32, line 7
The set of possible states excludes the idle state since The set of possible states excludes the idle state since
entries do not exist in this table in the idle state." entries do not exist in this table in the idle state."
::= { pcePcepSessEntry 3 } ::= { pcePcepSessEntry 3 }
pcePcepSessConnectRetry OBJECT-TYPE pcePcepSessConnectRetry OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times that the local PCEP speaker has "The number of times that the local PCEP entity has
attempted to establish a TCP connection for this session attempted to establish a TCP connection for this session
without success. The PCEP speaker gives up when this without success. The PCEP entity gives up when this
reaches pcePcepEntityConnectMaxRetry." reaches pcePcepEntityConnectMaxRetry."
::= { pcePcepSessEntry 4 } ::= { pcePcepSessEntry 4 }
pcePcepSessLocalID OBJECT-TYPE pcePcepSessLocalID OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the PCEP session ID used by the local PCEP "The value of the PCEP session ID used by the local PCEP
speaker in the Open message for this session. entity in the Open message for this session.
If pcePcepSessState is tcpPending then this is the session If pcePcepSessState is tcpPending then this is the session
ID that will be used in the Open message. Otherwise, this ID that will be used in the Open message. Otherwise, this
is the session ID that was sent in the Open message." is the session ID that was sent in the Open message."
::= { pcePcepSessEntry 5 } ::= { pcePcepSessEntry 5 }
pcePcepSessRemoteID OBJECT-TYPE pcePcepSessRemoteID OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at page 29, line 51 skipping to change at page 32, line 44
If pcePcepSessState is tcpPending or openWait then this If pcePcepSessState is tcpPending or openWait then this
field is not used and MUST be set to zero." field is not used and MUST be set to zero."
::= { pcePcepSessEntry 6 } ::= { pcePcepSessEntry 6 }
pcePcepSessKeepaliveTimer OBJECT-TYPE pcePcepSessKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The agreed maximum interval at which the local PCEP speaker "The agreed maximum interval at which the local PCEP entity
transmits PCEP messages on this PCEP session. Zero means transmits PCEP messages on this PCEP session. Zero means
that the local PCEP speaker never sends Keepalives on this that the local PCEP entity never sends Keepalives on this
session. session.
This field is used if and only if pcePcepSessState is This field is used if and only if pcePcepSessState is
sessionUp. Otherwise, it is not used and MUST be set to sessionUp. Otherwise, it is not used and MUST be set to
zero." zero."
::= { pcePcepSessEntry 7 } ::= { pcePcepSessEntry 7 }
pcePcepSessPeerKeepaliveTimer OBJECT-TYPE pcePcepSessPeerKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The agreed maximum interval at which the peer transmits PCEP "The agreed maximum interval at which the peer transmits PCEP
messages on this PCEP session. Zero means that the peer messages on this PCEP session. Zero means that the peer
skipping to change at page 31, line 10 skipping to change at page 34, line 4
pcePcepSessKAHoldTimeRem OBJECT-TYPE pcePcepSessKAHoldTimeRem OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The keep alive hold time remaining for this session. "The keep alive hold time remaining for this session.
If pcePcepSessState is tcpPending or openWait then this If pcePcepSessState is tcpPending or openWait then this
field is not used and MUST be set to zero." field is not used and MUST be set to zero."
::= { pcePcepSessEntry 11 } ::= { pcePcepSessEntry 11 }
pcePcepSessOverloaded OBJECT-TYPE pcePcepSessOverloaded OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If the local PCEP speaker has informed the peer that it is "If the local PCEP entity has informed the peer that it is
currently overloaded, then this is set to true. Otherwise, currently overloaded, then this is set to true. Otherwise,
it is set to false." it is set to false."
::= { pcePcepSessEntry 12 } ::= { pcePcepSessEntry 12 }
pcePcepSessOverloadTime OBJECT-TYPE pcePcepSessOverloadTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval of time until the local PCEP speaker will cease "The interval of time that is remaining until the local PCEP
to be overloaded on this session. entity will cease to be overloaded on this session.
This field is only used if pcePcepSessOverloaded is set to This field is only used if pcePcepSessOverloaded is set to
true. Otherwise, it is not used and MUST be set to zero." true. Otherwise, it is not used and MUST be set to zero."
::= { pcePcepSessEntry 13 } ::= { pcePcepSessEntry 13 }
pcePcepSessPeerOverloaded OBJECT-TYPE pcePcepSessPeerOverloaded OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If the peer has informed the local PCEP speaker that it is "If the peer has informed the local PCEP entity that it is
currently overloaded, then this is set to true. Otherwise, currently overloaded, then this is set to true. Otherwise,
it is set to false." it is set to false."
::= { pcePcepSessEntry 14 } ::= { pcePcepSessEntry 14 }
pcePcepSessPeerOverloadTime OBJECT-TYPE pcePcepSessPeerOverloadTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval of time until the peer will cease to be "The interval of time that is remaining until the peer will
overloaded. If it is not known how long the peer will stay cease to be overloaded. If it is not known how long the
in overloaded state, this field is set to zero. peer will stay in overloaded state, this field is set to
zero.
This field is only used if pcePcepSessPeerOverloaded is set This field is only used if pcePcepSessPeerOverloaded is set
to true. Otherwise, it is not used and MUST be set to to true. Otherwise, it is not used and MUST be set to
zero." zero."
::= { pcePcepSessEntry 15 } ::= { pcePcepSessEntry 15 }
pcePcepSessDiscontinuityTime OBJECT-TYPE pcePcepSessDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at page 34, line 51 skipping to change at page 37, line 47
::= { pcePcepSessEntry 29 } ::= { pcePcepSessEntry 29 }
pcePcepSessNumUnknownRcvd OBJECT-TYPE pcePcepSessNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown messages received on this session." "The number of unknown messages received on this session."
::= { pcePcepSessEntry 30 } ::= { pcePcepSessEntry 30 }
pcePcepSessNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of corrupted PCEP message received on this
session."
::= { pcePcepSessEntry 31 }
pcePcepSessNumReqSent OBJECT-TYPE pcePcepSessNumReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session. A request "The number of requests sent on this session. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqSent because This might be greater than pcePcepSessNumPCReqSent because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepSessEntry 31 } ::= { pcePcepSessEntry 32 }
pcePcepSessNumSvecSent OBJECT-TYPE pcePcepSessNumSvecSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects sent on this session in PCReq "The number of SVEC objects sent on this session in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepSessEntry 32 } ::= { pcePcepSessEntry 33 }
pcePcepSessNumSvecReqSent OBJECT-TYPE pcePcepSessNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that appeared in "The number of requests sent on this session that appeared in
one or more SVEC objects." one or more SVEC objects."
::= { pcePcepSessEntry 33 } ::= { pcePcepSessEntry 34 }
pcePcepSessNumReqSentPendRep OBJECT-TYPE pcePcepSessNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent on this session "The number of requests that have been sent on this session
for which a response is still pending." for which a response is still pending."
::= { pcePcepSessEntry 34 } ::= { pcePcepSessEntry 35 }
pcePcepSessNumReqSentEroRcvd OBJECT-TYPE pcePcepSessNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of successful responses received on this session. "The number of successful responses received on this session.
A response corresponds 1:1 with an RP object in a PCRep A response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an message. A successful response is a response for which an
ERO was successfully computed." ERO was successfully computed."
::= { pcePcepSessEntry 35 } ::= { pcePcepSessEntry 36 }
pcePcepSessNumReqSentNoPathRcvd OBJECT-TYPE pcePcepSessNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unsuccessful responses received on this "The number of unsuccessful responses received on this
session. A response corresponds 1:1 with an RP object in a session. A response corresponds 1:1 with an RP object in a
PCRep message. An unsuccessful response is a response with PCRep message. An unsuccessful response is a response with
a NO-PATH object." a NO-PATH object."
::= { pcePcepSessEntry 36 } ::= { pcePcepSessEntry 37 }
pcePcepSessNumReqSentCancelRcvd OBJECT-TYPE pcePcepSessNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were "The number of requests sent on this session that were
cancelled by the peer with a PCNtf message. cancelled by the peer with a PCNtf message.
This might be different than pcePcepSessNumPCNtfRcvd because This might be different than pcePcepSessNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 37 } ::= { pcePcepSessEntry 38 }
pcePcepSessNumReqSentErrorRcvd OBJECT-TYPE pcePcepSessNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were "The number of requests sent on this session that were
rejected by the peer with a PCErr message. rejected by the peer with a PCErr message.
This might be different than pcePcepSessNumPCErrRcvd because This might be different than pcePcepSessNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 38 } ::= { pcePcepSessEntry 39 }
pcePcepSessNumReqSentTimeout OBJECT-TYPE pcePcepSessNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that have been "The number of requests sent on this session that have been
sent to a peer and have been abandoned because the peer has sent to a peer and have been abandoned because the peer has
taken too long to respond to them." taken too long to respond to them."
::= { pcePcepSessEntry 40 }
::= { pcePcepSessEntry 39 }
pcePcepSessNumReqSentCancelSent OBJECT-TYPE pcePcepSessNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were sent "The number of requests sent on this session that were sent
to the peer and explicitly canceled by the local PCEP to the peer and explicitly canceled by the local PCEP
speaker sending a PCNtf." entity sending a PCNtf."
::= { pcePcepSessEntry 40 } ::= { pcePcepSessEntry 41 }
pcePcepSessNumReqRcvd OBJECT-TYPE pcePcepSessNumReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session. A request "The number of requests received on this session. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqRcvd because This might be greater than pcePcepSessNumPCReqRcvd because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepSessEntry 41 } ::= { pcePcepSessEntry 42 }
pcePcepSessNumSvecRcvd OBJECT-TYPE pcePcepSessNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects received on this session in PCReq "The number of SVEC objects received on this session in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepSessEntry 42 } ::= { pcePcepSessEntry 43 }
pcePcepSessNumSvecReqRcvd OBJECT-TYPE pcePcepSessNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that "The number of requests received on this session that
appeared in one or more SVEC objects." appeared in one or more SVEC objects."
::= { pcePcepSessEntry 43 } ::= { pcePcepSessEntry 44 }
pcePcepSessNumReqRcvdPendRep OBJECT-TYPE pcePcepSessNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received on this "The number of requests that have been received on this
session for which a response is still pending." session for which a response is still pending."
::= { pcePcepSessEntry 44 } ::= { pcePcepSessEntry 45 }
pcePcepSessNumReqRcvdEroSent OBJECT-TYPE pcePcepSessNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of successful responses sent on this session. A "The number of successful responses sent on this session. A
response corresponds 1:1 with an RP object in a PCRep response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an message. A successful response is a response for which an
ERO was successfully computed." ERO was successfully computed."
::= { pcePcepSessEntry 45 } ::= { pcePcepSessEntry 46 }
pcePcepSessNumReqRcvdNoPathSent OBJECT-TYPE pcePcepSessNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unsuccessful responses sent on this session. "The number of unsuccessful responses sent on this session.
A response corresponds 1:1 with an RP object in a PCRep A response corresponds 1:1 with an RP object in a PCRep
message. An unsuccessful response is a response with a message. An unsuccessful response is a response with a
NO-PATH object." NO-PATH object."
::= { pcePcepSessEntry 46 } ::= { pcePcepSessEntry 47 }
pcePcepSessNumReqRcvdCancelSent OBJECT-TYPE pcePcepSessNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that were "The number of requests received on this session that were
cancelled by the local PCEP speaker sending a PCNtf message. cancelled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepSessNumPCNtfSent because This might be different than pcePcepSessNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 47 } ::= { pcePcepSessEntry 48 }
pcePcepSessNumReqRcvdErrorSent OBJECT-TYPE pcePcepSessNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that were "The number of requests received on this session that were
rejected by the local PCEP speaker sending a PCErr message. rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepSessNumPCErrSent because This might be different than pcePcepSessNumPCErrSent because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 48 } ::= { pcePcepSessEntry 49 }
pcePcepSessNumReqRcvdCancelRcvd OBJECT-TYPE pcePcepSessNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received on this session "The number of requests that were received on this session
and explicitly canceled by the peer sending a PCNtf." and explicitly canceled by the peer sending a PCNtf."
::= { pcePcepSessEntry 49 } ::= { pcePcepSessEntry 50 }
pcePcepSessNumRepRcvdUnknown OBJECT-TYPE pcePcepSessNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of responses to unknown requests received on this "The number of responses to unknown requests received on this
session. A response to an unknown request is a response session. A response to an unknown request is a response
whose RP object does not contain the request ID of any whose RP object does not contain the request ID of any
request that is currently outstanding on the session." request that is currently outstanding on the session."
::= { pcePcepSessEntry 50 } ::= { pcePcepSessEntry 51 }
pcePcepSessNumReqRcvdUnknown OBJECT-TYPE pcePcepSessNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown requests that have been received on "The number of unknown requests that have been received on
this session. An unknown request is a request whose RP this session. An unknown request is a request whose RP
object contains a request ID of zero." object contains a request ID of zero."
::= { pcePcepSessEntry 51 } ::= { pcePcepSessEntry 52 }
---
--- Notifications Configuration
---
pcePcepNotificationsMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period, or may
queue them until an appropriate time. A value of 0
means no notifications are emitted and all should be
discarded (that is, not queued)."
::= { pcePcepObjects 4 }
--- ---
--- Notifications --- Notifications
--- ---
pcePcepSessUp NOTIFICATION-TYPE pcePcepSessUp NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessState, pcePcepSessState,
pcePcepSessStateLastChange pcePcepSessStateLastChange
} }
skipping to change at page 40, line 25 skipping to change at page 43, line 46
'pcePcepSessState' leaves the 'sessionUp' state." 'pcePcepSessState' leaves the 'sessionUp' state."
::= { pcePcepNotifications 2 } ::= { pcePcepNotifications 2 }
pcePcepSessLocalOverload NOTIFICATION-TYPE pcePcepSessLocalOverload NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessOverloaded, pcePcepSessOverloaded,
pcePcepSessOverloadTime pcePcepSessOverloadTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the local PCEP speaker enters "This notification is sent when the local PCEP entity enters
overload state for a peer." overload state for a peer."
::= { pcePcepNotifications 3 } ::= { pcePcepNotifications 3 }
pcePcepSessLocalOverloadClear NOTIFICATION-TYPE pcePcepSessLocalOverloadClear NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessOverloaded pcePcepSessOverloaded
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the local PCEP speaker leaves "This notification is sent when the local PCEP entity leaves
overload state for a peer." overload state for a peer."
::= { pcePcepNotifications 4 } ::= { pcePcepNotifications 4 }
pcePcepSessPeerOverload NOTIFICATION-TYPE pcePcepSessPeerOverload NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessPeerOverloaded, pcePcepSessPeerOverloaded,
pcePcepSessPeerOverloadTime pcePcepSessPeerOverloadTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 41, line 38 skipping to change at page 45, line 11
DESCRIPTION DESCRIPTION
"The Module is implemented with support for read-only. In "The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing other words, only monitoring is available by implementing
this MODULE-COMPLIANCE." this MODULE-COMPLIANCE."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
pcePcepGeneralGroup, pcePcepGeneralGroup,
pcePcepNotificationsGroup pcePcepNotificationsGroup
} }
OBJECT pcePcepEntityAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required."
OBJECT pcePcepPeerAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required."
::= { pcePcepCompliances 1 } ::= { pcePcepCompliances 1 }
-- units of conformance -- units of conformance
pcePcepGeneralGroup OBJECT-GROUP pcePcepGeneralGroup OBJECT-GROUP
OBJECTS { pcePcepEntityAdminStatus, OBJECTS { pcePcepEntityAdminStatus,
pcePcepEntityOperStatus, pcePcepEntityOperStatus,
pcePcepEntityAddrType, pcePcepEntityAddrType,
pcePcepEntityAddr, pcePcepEntityAddr,
pcePcepEntityConnectTimer, pcePcepEntityConnectTimer,
pcePcepEntityConnectMaxRetry, pcePcepEntityConnectMaxRetry,
pcePcepEntityInitBackoffTimer,
pcePcepEntityMaxBackoffTimer,
pcePcepEntityOpenWaitTimer, pcePcepEntityOpenWaitTimer,
pcePcepEntityKeepWaitTimer, pcePcepEntityKeepWaitTimer,
pcePcepEntityKeepAliveTimer, pcePcepEntityKeepAliveTimer,
pcePcepEntityDeadTimer, pcePcepEntityDeadTimer,
pcePcepEntityAllowNegotiation,
pcePcepEntityMaxKeepAliveTimer, pcePcepEntityMaxKeepAliveTimer,
pcePcepEntityMaxDeadTimer, pcePcepEntityMaxDeadTimer,
pcePcepEntityAllowNegotiation,
pcePcepEntityMinKeepAliveTimer, pcePcepEntityMinKeepAliveTimer,
pcePcepEntityMinDeadTimer, pcePcepEntityMinDeadTimer,
pcePcepEntitySyncTimer, pcePcepEntitySyncTimer,
pcePcepEntityRequestTimer, pcePcepEntityRequestTimer,
pcePcepEntityInitBackoffTimer,
pcePcepEntityMaxBackoffTimer,
pcePcepEntityMaxSessions, pcePcepEntityMaxSessions,
pcePcepEntityMaxUnknownReqs, pcePcepEntityMaxUnknownReqs,
pcePcepEntityMaxUnknownMsgs, pcePcepEntityMaxUnknownMsgs,
pcePcepPeerRole, pcePcepPeerRole,
pcePcepPeerDiscontinuityTime, pcePcepPeerDiscontinuityTime,
pcePcepPeerInitiateSession, pcePcepPeerInitiateSession,
pcePcepPeerSessionExists, pcePcepPeerSessionExists,
pcePcepPeerNumSessSetupOK, pcePcepPeerNumSessSetupOK,
pcePcepPeerNumSessSetupFail, pcePcepPeerNumSessSetupFail,
pcePcepPeerSessionUpTime, pcePcepPeerSessionUpTime,
pcePcepPeerSessionFailTime, pcePcepPeerSessionFailTime,
pcePcepPeerSessionFailUpTime,
pcePcepPeerAvgRspTime, pcePcepPeerAvgRspTime,
pcePcepPeerLWMRspTime, pcePcepPeerLWMRspTime,
pcePcepPeerHWMRspTime, pcePcepPeerHWMRspTime,
pcePcepPeerNumPCReqSent, pcePcepPeerNumPCReqSent,
pcePcepPeerNumPCReqRcvd, pcePcepPeerNumPCReqRcvd,
pcePcepPeerNumPCRepSent, pcePcepPeerNumPCRepSent,
pcePcepPeerNumPCRepRcvd, pcePcepPeerNumPCRepRcvd,
pcePcepPeerNumPCErrSent, pcePcepPeerNumPCErrSent,
pcePcepPeerNumPCErrRcvd, pcePcepPeerNumPCErrRcvd,
pcePcepPeerNumPCNtfSent, pcePcepPeerNumPCNtfSent,
pcePcepPeerNumPCNtfRcvd, pcePcepPeerNumPCNtfRcvd,
pcePcepPeerNumKeepaliveSent, pcePcepPeerNumKeepaliveSent,
pcePcepPeerNumKeepaliveRcvd, pcePcepPeerNumKeepaliveRcvd,
pcePcepPeerNumUnknownRcvd, pcePcepPeerNumUnknownRcvd,
pcePcepPeerNumCorruptRcvd,
pcePcepPeerNumReqSent, pcePcepPeerNumReqSent,
pcePcepPeerNumSvecSent, pcePcepPeerNumSvecSent,
pcePcepPeerNumSvecReqSent, pcePcepPeerNumSvecReqSent,
pcePcepPeerNumReqSentPendRep, pcePcepPeerNumReqSentPendRep,
pcePcepPeerNumReqSentEroRcvd, pcePcepPeerNumReqSentEroRcvd,
pcePcepPeerNumReqSentNoPathRcvd, pcePcepPeerNumReqSentNoPathRcvd,
pcePcepPeerNumReqSentCancelRcvd, pcePcepPeerNumReqSentCancelRcvd,
pcePcepPeerNumReqSentErrorRcvd, pcePcepPeerNumReqSentErrorRcvd,
pcePcepPeerNumReqSentTimeout, pcePcepPeerNumReqSentTimeout,
pcePcepPeerNumReqSentCancelSent, pcePcepPeerNumReqSentCancelSent,
skipping to change at page 43, line 42 skipping to change at page 47, line 29
pcePcepSessNumPCReqRcvd, pcePcepSessNumPCReqRcvd,
pcePcepSessNumPCRepSent, pcePcepSessNumPCRepSent,
pcePcepSessNumPCRepRcvd, pcePcepSessNumPCRepRcvd,
pcePcepSessNumPCErrSent, pcePcepSessNumPCErrSent,
pcePcepSessNumPCErrRcvd, pcePcepSessNumPCErrRcvd,
pcePcepSessNumPCNtfSent, pcePcepSessNumPCNtfSent,
pcePcepSessNumPCNtfRcvd, pcePcepSessNumPCNtfRcvd,
pcePcepSessNumKeepaliveSent, pcePcepSessNumKeepaliveSent,
pcePcepSessNumKeepaliveRcvd, pcePcepSessNumKeepaliveRcvd,
pcePcepSessNumUnknownRcvd, pcePcepSessNumUnknownRcvd,
pcePcepSessNumCorruptRcvd,
pcePcepSessNumReqSent, pcePcepSessNumReqSent,
pcePcepSessNumSvecSent, pcePcepSessNumSvecSent,
pcePcepSessNumSvecReqSent, pcePcepSessNumSvecReqSent,
pcePcepSessNumReqSentPendRep, pcePcepSessNumReqSentPendRep,
pcePcepSessNumReqSentEroRcvd, pcePcepSessNumReqSentEroRcvd,
pcePcepSessNumReqSentNoPathRcvd, pcePcepSessNumReqSentNoPathRcvd,
pcePcepSessNumReqSentCancelRcvd, pcePcepSessNumReqSentCancelRcvd,
pcePcepSessNumReqSentErrorRcvd, pcePcepSessNumReqSentErrorRcvd,
pcePcepSessNumReqSentTimeout, pcePcepSessNumReqSentTimeout,
pcePcepSessNumReqSentCancelSent, pcePcepSessNumReqSentCancelSent,
pcePcepSessNumReqRcvd, pcePcepSessNumReqRcvd,
pcePcepSessNumSvecRcvd, pcePcepSessNumSvecRcvd,
pcePcepSessNumSvecReqRcvd, pcePcepSessNumSvecReqRcvd,
pcePcepSessNumReqRcvdPendRep, pcePcepSessNumReqRcvdPendRep,
pcePcepSessNumReqRcvdEroSent, pcePcepSessNumReqRcvdEroSent,
pcePcepSessNumReqRcvdNoPathSent, pcePcepSessNumReqRcvdNoPathSent,
pcePcepSessNumReqRcvdCancelSent, pcePcepSessNumReqRcvdCancelSent,
pcePcepSessNumReqRcvdErrorSent, pcePcepSessNumReqRcvdErrorSent,
pcePcepSessNumReqRcvdCancelRcvd, pcePcepSessNumReqRcvdCancelRcvd,
pcePcepSessNumRepRcvdUnknown, pcePcepSessNumRepRcvdUnknown,
pcePcepSessNumReqRcvdUnknown pcePcepSessNumReqRcvdUnknown,
pcePcepNotificationsMaxRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects that apply to all PCEP MIB implementations." "Objects that apply to all PCEP MIB module implementations."
::= { pcePcepGroups 1 } ::= { pcePcepGroups 1 }
pcePcepNotificationsGroup NOTIFICATION-GROUP pcePcepNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { pcePcepSessUp, NOTIFICATIONS { pcePcepSessUp,
pcePcepSessDown, pcePcepSessDown,
pcePcepSessLocalOverload, pcePcepSessLocalOverload,
pcePcepSessLocalOverloadClear, pcePcepSessLocalOverloadClear,
pcePcepSessPeerOverload, pcePcepSessPeerOverload,
pcePcepSessPeerOverloadClear pcePcepSessPeerOverloadClear
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The notifications for a PCEP MIB implementation." "The notifications for a PCEP MIB module implementation."
::= { pcePcepGroups 2 } ::= { pcePcepGroups 2 }
END END
6. Security Considerations 5. Security Considerations
The readable objects in the PCE-PCEP-MIB module (i.e., those with The readable objects in the PCE-PCEP-MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive in MAX-ACCESS other than not-accessible) may be considered sensitive in
some environments since, collectively, they provide information about some environments since, collectively, they provide information about
the amount and frequency of path computation requests and responses the amount and frequency of path computation requests and responses
within the network and can reveal some aspects of their within the network and can reveal some aspects of their
configuration. configuration.
In such environments it is important to control also GET and NOTIFY In such environments it is important to control also GET and NOTIFY
access to these objects and possibly even to encrypt their values access to these objects and possibly even to encrypt their values
when sending them over the network via SNMP. when sending them over the network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec), Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module. in this MIB module.
It is RECOMMENDED that implementers consider the security features as Implementations MUST provide the security features described by the
provided by the SNMPv3 framework (see [RFC3410], section 8), SNMPv3 framework (see [RFC3410]), including full support for
including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy via the User-based Security Model (USM)
authentication and privacy). [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
7. IANA Considerations 6. IANA Considerations
The MIB module in this document uses the following IANA-assigned The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry: OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value Descriptor OBJECT IDENTIFIER value
---------- ----------------------- ---------- -----------------------
pcePcepMIB { mib-2 XXX } pcePcepMIB { mib-2 XXX }
Editor's Note (to be removed prior to publication): the IANA is Editor's Note (to be removed prior to publication): the IANA is
requested to assign a value for "XXX" under the 'mib-2' subtree and requested to assign a value for "XXX" under the 'mib-2' subtree and
to record the assignment in the SMI Numbers registry. When the to record the assignment in the SMI Numbers registry. When the
assignment has been made, the RFC Editor is asked to replace "XXX" assignment has been made, the RFC Editor is asked to replace "XXX"
(here and in the MIB module) with the assigned value and to remove (here and in the MIB module) with the assigned value and to remove
this note. this note.
8. Contributors 7. Acknowledgement
Thanks to Dhruv Dhody for his contribution and detailed review. The authors would like to thank Santanu Mazumder, Meral Shirazipour
and Adrian Farrel for their valuable input.
9. References Funding for the RFC Editor function is currently provided by the
Internet Society.
9.1. Normative References 8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD
skipping to change at page 46, line 21 skipping to change at page 50, line 17
April 1999. April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. [RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005. Addresses", RFC 4001, February 2005.
[RFC5440] Vasseur, JP. and JL. Le Roux, "Path Computation Element [RFC5440] Vasseur, JP. and JL. Le Roux, "Path Computation Element
(PCE) Communication Protocol (PCEP)", RFC 5440, March (PCE) Communication Protocol (PCEP)", RFC 5440, March
2009. 2009.
9.2. Informative References 8.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet- "Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002. Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC4655] Farrel, A., Vasseur, J., and J. Ash, "A Path Computation [RFC4655] Farrel, A., Vasseur, J., and J. Ash, "A Path Computation
Element (PCE)-Based Architecture", RFC 4655, August 2006. Element (PCE)-Based Architecture", RFC 4655, August 2006.
Appendix A. Acknowledgement [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)", STD
78, RFC 5591, June 2009.
The authors would like to thank Santanu Mazumder and Meral [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shirazipour for their valuable input. Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
Funding for the RFC Editor function is currently provided by the [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Internet Society. Model for the Simple Network Management Protocol (SNMP)",
STD 78, RFC 6353, July 2011.
Appendix A. Contributors
Dhruv Dhody
Huawei Technologies
Leela Palace
Bangalore, Karnataka 560008
India
EMail: dhruv.ietf@gmail.com
Appendix B. PCEP MIB Module Example
This example considers the set of PCC / PCE relationships shown in
the following figure. The example shows the contents of the PCEP MIB
module as read at PCE2 and PCCb.
PCE1---PCE2 PCE3
| / | / |
| / | / |
PCCa/ PCCb PCCc
The IP addresses of the PCE speakers in this diagram are given in the
following table.
+------+-------------+
| PCE1 | 1.1.1.1 |
+------+-------------+
| PCE2 | 2.2.2.2 |
+------+-------------+
| PCE3 | 3.3.3.3 |
+------+-------------+
| PCCa | 11.11.11.11 |
+------+-------------+
| PCCb | 22.22.22.22 |
+------+-------------+
| PCCc | 33.33.33.33 |
+------+-------------+
In this example, the PCEP session between PCCb and PCE3 is currently
down.
B.1. Contents of PCEP MIB module at PCE2
At PCE2, there is a single local PCEP entity which has three peers
(PCCa, PCCb and PCE1). There is a session active to all of these
peers.
The contents of the PCEP MIB module as read at PCE2 are as follows.
In pcePcepEntityTable {
pcePcepEntityIndex 1,
pcePcepEntityAdminStatus adminStatusUp(1),
pcePcepEntityOperStatus operStatusUp(1),
pcePcepEntityAddrType ipv4(1),
pcePcepEntityAddr 2.2.2.2, -- PCE2
pcePcepEntityConnectTimer 60,
pcePcepEntityConnectMaxRetry 5,
pcePcepEntityInitBackoffTimer 30,
pcePcepEntityMaxBackoffTimer 3600,
pcePcepEntityOpenWaitTimer 60,
pcePcepEntityKeepWaitTimer 60,
pcePcepEntityKeepAliveTimer 1,
pcePcepEntityDeadTimer 4,
pcePcepEntityAllowNegotiation true(1),
pcePcepEntityMaxKeepAliveTimer 60,
pcePcepEntityMaxDeadTimer 240,
pcePcepEntityMinKeepAliveTimer 1,
pcePcepEntityMinDeadTimer 4,
pcePcepEntitySyncTimer 60,
pcePcepEntityRequestTimer 120,
pcePcepEntityMaxSessions 999,
pcePcepEntityMaxUnknownReqs 5,
pcePcepEntityMaxUnknownMsgs 5
}
In pcePcepPeerTable {
pcePcepPeerAddrType ipv4(1), --PCE1
pcePcepPeerAddr 1.1.1.1,
pcePcepPeerRole pccAndPce(3),
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession true(1),
pcePcepPeerSessionExists true(1),
pcePcepPeerNumSessSetupOK 1,
pcePcepPeerNumSessSetupFail 0,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime 0,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime 0,
pcePcepPeerLWMRspTime 0,
pcePcepPeerHWMRspTime 0,
pcePcepPeerNumPCReqSent 0,
pcePcepPeerNumPCReqRcvd 0,
pcePcepPeerNumPCRepSent 0,
pcePcepPeerNumPCRepRcvd 0,
pcePcepPeerNumPCErrSent 0,
pcePcepPeerNumPCErrRcvd 0,
pcePcepPeerNumPCNtfSent 0,
pcePcepPeerNumPCNtfRcvd 0,
pcePcepPeerNumKeepaliveSent 123,
pcePcepPeerNumKeepaliveRcvd 123,
pcePcepPeerNumUnknownRcvd 0,
pcePcepPeerNumCorruptRcvd 0,
pcePcepPeerNumReqSent 0,
pcePcepPeerNumSvecSent 0,
pcePcepPeerNumSvecReqSent 0,
pcePcepPeerNumReqSentPendRep 0,
pcePcepPeerNumReqSentEroRcvd 0,
pcePcepPeerNumReqSentNoPathRcvd 0,
pcePcepPeerNumReqSentCancelRcvd 0,
pcePcepPeerNumReqSentErrorRcvd 0,
pcePcepPeerNumReqSentTimeout 0,
pcePcepPeerNumReqSentCancelSent 0,
pcePcepPeerNumReqSentClosed 0,
pcePcepPeerNumReqRcvd 0,
pcePcepPeerNumSvecRcvd 0,
pcePcepPeerNumSvecReqRcvd 0,
pcePcepPeerNumReqRcvdPendRep 0,
pcePcepPeerNumReqRcvdEroSent 0,
pcePcepPeerNumReqRcvdNoPathSent 0,
pcePcepPeerNumReqRcvdCancelSent 0,
pcePcepPeerNumReqRcvdErrorSent 0,
pcePcepPeerNumReqRcvdCancelRcvd 0,
pcePcepPeerNumReqRcvdClosed 0,
pcePcepPeerNumRepRcvdUnknown 0,
pcePcepPeerNumReqRcvdUnknown 0
},
{
pcePcepPeerAddrType ipv4(1), --PCCa
pcePcepPeerAddr 11.11.11.11,
pcePcepPeerRole pcc(1),
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession false(0),
pcePcepPeerSessionExists true(1),
pcePcepPeerNumSessSetupOK 1,
pcePcepPeerNumSessSetupFail 0,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime 0,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime 200,
pcePcepPeerLWMRspTime 100,
pcePcepPeerHWMRspTime 300,
pcePcepPeerNumPCReqSent 0,
pcePcepPeerNumPCReqRcvd 3,
pcePcepPeerNumPCRepSent 3,
pcePcepPeerNumPCRepRcvd 0,
pcePcepPeerNumPCErrSent 0,
pcePcepPeerNumPCErrRcvd 0,
pcePcepPeerNumPCNtfSent 0,
pcePcepPeerNumPCNtfRcvd 0,
pcePcepPeerNumKeepaliveSent 123,
pcePcepPeerNumKeepaliveRcvd 123,
pcePcepPeerNumUnknownRcvd 0,
pcePcepPeerNumCorruptRcvd 0,
pcePcepPeerNumReqSent 0,
pcePcepPeerNumSvecSent 0,
pcePcepPeerNumSvecReqSent 0,
pcePcepPeerNumReqSentPendRep 0,
pcePcepPeerNumReqSentEroRcvd 0,
pcePcepPeerNumReqSentNoPathRcvd 0,
pcePcepPeerNumReqSentCancelRcvd 0,
pcePcepPeerNumReqSentErrorRcvd 0,
pcePcepPeerNumReqSentTimeout 0,
pcePcepPeerNumReqSentCancelSent 0,
pcePcepPeerNumReqSentClosed 0,
pcePcepPeerNumReqRcvd 3,
pcePcepPeerNumSvecRcvd 0,
pcePcepPeerNumSvecReqRcvd 0,
pcePcepPeerNumReqRcvdPendRep 0,
pcePcepPeerNumReqRcvdEroSent 3,
pcePcepPeerNumReqRcvdNoPathSent 0,
pcePcepPeerNumReqRcvdCancelSent 0,
pcePcepPeerNumReqRcvdErrorSent 0,
pcePcepPeerNumReqRcvdCancelRcvd 0,
pcePcepPeerNumReqRcvdClosed 0,
pcePcepPeerNumRepRcvdUnknown 0,
pcePcepPeerNumReqRcvdUnknown 0
},
{
pcePcepPeerAddrType ipv4(1), -- PCCb
pcePcepPeerAddr 22.22.22.22,
pcePcepPeerRole pcc(1),
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession true(1),
pcePcepPeerSessionExists true(1),
pcePcepPeerNumSessSetupOK 1,
pcePcepPeerNumSessSetupFail 0,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime 0,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime 200,
pcePcepPeerLWMRspTime 100,
pcePcepPeerHWMRspTime 300,
pcePcepPeerNumPCReqSent 0,
pcePcepPeerNumPCReqRcvd 4,
pcePcepPeerNumPCRepSent 4,
pcePcepPeerNumPCRepRcvd 0,
pcePcepPeerNumPCErrSent 0,
pcePcepPeerNumPCErrRcvd 0,
pcePcepPeerNumPCNtfSent 0,
pcePcepPeerNumPCNtfRcvd 0,
pcePcepPeerNumKeepaliveSent 123,
pcePcepPeerNumKeepaliveRcvd 123,
pcePcepPeerNumUnknownRcvd 0,
pcePcepPeerNumCorruptRcvd 0,
pcePcepPeerNumReqSent 0,
pcePcepPeerNumSvecSent 0,
pcePcepPeerNumSvecReqSent 0,
pcePcepPeerNumReqSentPendRep 0,
pcePcepPeerNumReqSentEroRcvd 0,
pcePcepPeerNumReqSentNoPathRcvd 0,
pcePcepPeerNumReqSentCancelRcvd 0,
pcePcepPeerNumReqSentErrorRcvd 0,
pcePcepPeerNumReqSentTimeout 0,
pcePcepPeerNumReqSentCancelSent 0,
pcePcepPeerNumReqSentClosed 0,
pcePcepPeerNumReqRcvd 4,
pcePcepPeerNumSvecRcvd 0,
pcePcepPeerNumSvecReqRcvd 0,
pcePcepPeerNumReqRcvdPendRep 0,
pcePcepPeerNumReqRcvdEroSent 3,
pcePcepPeerNumReqRcvdNoPathSent 1,
pcePcepPeerNumReqRcvdCancelSent 0,
pcePcepPeerNumReqRcvdErrorSent 0,
pcePcepPeerNumReqRcvdCancelRcvd 0,
pcePcepPeerNumReqRcvdClosed 0,
pcePcepPeerNumRepRcvdUnknown 0,
pcePcepPeerNumReqRcvdUnknown 0
}
In pcePcepSessTable {
pcePcepSessInitiator local(1), --PCE1
pcePcepSessStateLastChange TimeStamp,
pcePcepSessState sessionUp(4),
pcePcepSessConnectRetry 0,
pcePcepSessLocalID 1,
pcePcepSessRemoteID 2,
pcePcepSessKeepaliveTimer 1,
pcePcepSessPeerKeepaliveTimer 1,
pcePcepSessDeadTimer 4,
pcePcepSessPeerDeadTimer 4,
pcePcepSessKAHoldTimeRem 1,
pcePcepSessOverloaded false(0),
pcePcepSessOverloadTime 0,
pcePcepSessPeerOverloaded false(0),
pcePcepSessPeerOverloadTime 0,
pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime 0,
pcePcepSessLWMRspTime 0,
pcePcepSessHWMRspTime 0,
pcePcepSessNumPCReqSent 0,
pcePcepSessNumPCReqRcvd 0,
pcePcepSessNumPCRepSent 0,
pcePcepSessNumPCRepRcvd 0,
pcePcepSessNumPCErrSent 0,
pcePcepSessNumPCErrRcvd 0,
pcePcepSessNumPCNtfSent 0,
pcePcepSessNumPCNtfRcvd 0,
pcePcepSessNumKeepaliveSent 123,
pcePcepSessNumKeepaliveRcvd 123,
pcePcepSessNumUnknownRcvd 0,
pcePcepSessNumCorruptRcvd 0,
pcePcepSessNumReqSent 0,
pcePcepSessNumSvecSent 0,
pcePcepSessNumSvecReqSent 0,
pcePcepSessNumReqSentPendRep 0,
pcePcepSessNumReqSentEroRcvd 0,
pcePcepSessNumReqSentNoPathRcvd 0,
pcePcepSessNumReqSentCancelRcvd 0,
pcePcepSessNumReqSentErrorRcvd 0,
pcePcepSessNumReqSentTimeout 0,
pcePcepSessNumReqSentCancelSent 0,
pcePcepSessNumReqRcvd 0,
pcePcepSessNumSvecRcvd 0,
pcePcepSessNumSvecReqRcvd 0,
pcePcepSessNumReqRcvdPendRep 0,
pcePcepSessNumReqRcvdEroSent 0,
pcePcepSessNumReqRcvdNoPathSent 0,
pcePcepSessNumReqRcvdCancelSent 0,
pcePcepSessNumReqRcvdErrorSent 0,
pcePcepSessNumReqRcvdCancelRcvd 0,
pcePcepSessNumRepRcvdUnknown 0,
pcePcepSessNumReqRcvdUnknown 0
},
{
pcePcepSessInitiator remote(2), --PCCa
pcePcepSessStateLastChange TimeStamp,
pcePcepSessState sessionUp(4),
pcePcepSessConnectRetry 0,
pcePcepSessLocalID 2,
pcePcepSessRemoteID 1,
pcePcepSessKeepaliveTimer 1,
pcePcepSessPeerKeepaliveTimer 1,
pcePcepSessDeadTimer 4,
pcePcepSessPeerDeadTimer 4,
pcePcepSessKAHoldTimeRem 1,
pcePcepSessOverloaded false(0),
pcePcepSessOverloadTime 0,
pcePcepSessPeerOverloaded false(0),
pcePcepSessPeerOverloadTime 0,
pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime 200,
pcePcepSessLWMRspTime 100,
pcePcepSessHWMRspTime 300,
pcePcepSessNumPCReqSent 0,
pcePcepSessNumPCReqRcvd 1,
pcePcepSessNumPCRepSent 1,
pcePcepSessNumPCRepRcvd 0,
pcePcepSessNumPCErrSent 0,
pcePcepSessNumPCErrRcvd 0,
pcePcepSessNumPCNtfSent 0,
pcePcepSessNumPCNtfRcvd 0,
pcePcepSessNumKeepaliveSent 123,
pcePcepSessNumKeepaliveRcvd 123,
pcePcepSessNumUnknownRcvd 0,
pcePcepSessNumCorruptRcvd 0,
pcePcepSessNumReqSent 0,
pcePcepSessNumSvecSent 0,
pcePcepSessNumSvecReqSent 0,
pcePcepSessNumReqSentPendRep 0,
pcePcepSessNumReqSentEroRcvd 0,
pcePcepSessNumReqSentNoPathRcvd 0,
pcePcepSessNumReqSentCancelRcvd 0,
pcePcepSessNumReqSentErrorRcvd 0,
pcePcepSessNumReqSentTimeout 0,
pcePcepSessNumReqSentCancelSent 0,
pcePcepSessNumReqRcvd 3,
pcePcepSessNumSvecRcvd 0,
pcePcepSessNumSvecReqRcvd 0,
pcePcepSessNumReqRcvdPendRep 0,
pcePcepSessNumReqRcvdEroSent 3,
pcePcepSessNumReqRcvdNoPathSent 0,
pcePcepSessNumReqRcvdCancelSent 0,
pcePcepSessNumReqRcvdErrorSent 0,
pcePcepSessNumReqRcvdCancelRcvd 0,
pcePcepSessNumRepRcvdUnknown 0,
pcePcepSessNumReqRcvdUnknown 0
},
{
pcePcepSessInitiator remote(2), --PCCb
pcePcepSessStateLastChange TimeStamp,
pcePcepSessState sessionUp(4),
pcePcepSessConnectRetry 0,
pcePcepSessLocalID 2,
pcePcepSessRemoteID 1,
pcePcepSessKeepaliveTimer 1,
pcePcepSessPeerKeepaliveTimer 1,
pcePcepSessDeadTimer 4,
pcePcepSessPeerDeadTimer 4,
pcePcepSessKAHoldTimeRem 1,
pcePcepSessOverloaded false(0),
pcePcepSessOverloadTime 0,
pcePcepSessPeerOverloaded false(0),
pcePcepSessPeerOverloadTime 0,
pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime 200,
pcePcepSessLWMRspTime 100,
pcePcepSessHWMRspTime 300,
pcePcepSessNumPCReqSent 0,
pcePcepSessNumPCReqRcvd 4,
pcePcepSessNumPCRepSent 4,
pcePcepSessNumPCRepRcvd 0,
pcePcepSessNumPCErrSent 0,
pcePcepSessNumPCErrRcvd 0,
pcePcepSessNumPCNtfSent 0,
pcePcepSessNumPCNtfRcvd 0,
pcePcepSessNumKeepaliveSent 123,
pcePcepSessNumKeepaliveRcvd 123,
pcePcepSessNumUnknownRcvd 0,
pcePcepSessNumCorruptRcvd 0,
pcePcepSessNumReqSent 0,
pcePcepSessNumSvecSent 0,
pcePcepSessNumSvecReqSent 0,
pcePcepSessNumReqSentPendRep 0,
pcePcepSessNumReqSentEroRcvd 0,
pcePcepSessNumReqSentNoPathRcvd 0,
pcePcepSessNumReqSentCancelRcvd 0,
pcePcepSessNumReqSentErrorRcvd 0,
pcePcepSessNumReqSentTimeout 0,
pcePcepSessNumReqSentCancelSent 0,
pcePcepSessNumReqRcvd 4,
pcePcepSessNumSvecRcvd 0,
pcePcepSessNumSvecReqRcvd 0,
pcePcepSessNumReqRcvdPendRep 0,
pcePcepSessNumReqRcvdEroSent 3,
pcePcepSessNumReqRcvdNoPathSent 1,
pcePcepSessNumReqRcvdCancelSent 0,
pcePcepSessNumReqRcvdErrorSent 0,
pcePcepSessNumReqRcvdCancelRcvd 0,
pcePcepSessNumRepRcvdUnknown 0,
pcePcepSessNumReqRcvdUnknown 0
}
B.2. Contents of PCEP MIB module at PCCb
At PCCb, there is a single local PCEP entity which has two peers
(PCE2 and PCE3). There is a session active to PCE2, but the session
to PCE3 is currently down.
The contents of the PCEP MIB module as read at PCCb are as follows.
In pcePcepEntityTable {
pcePcepEntityIndex 1,
pcePcepEntityAdminStatus adminStatusUp(1),
pcePcepEntityOperStatus operStatusUp(1),
pcePcepEntityAddrType ipv4(1),
pcePcepEntityAddr 22.22.22.22, -- PCCb
pcePcepEntityConnectTimer 60,
pcePcepEntityConnectMaxRetry 5,
pcePcepEntityInitBackoffTimer 30,
pcePcepEntityMaxBackoffTimer 3600,
pcePcepEntityOpenWaitTimer 60,
pcePcepEntityKeepWaitTimer 60,
pcePcepEntityKeepAliveTimer 1,
pcePcepEntityDeadTimer 4,
pcePcepEntityAllowNegotiation true(1),
pcePcepEntityMaxKeepAliveTimer 60,
pcePcepEntityMaxDeadTimer 240,
pcePcepEntityMinKeepAliveTimer 1,
pcePcepEntityMinDeadTimer 4,
pcePcepEntitySyncTimer 60,
pcePcepEntityRequestTimer 120,
pcePcepEntityMaxSessions 999,
pcePcepEntityMaxUnknownReqs 5,
pcePcepEntityMaxUnknownMsgs 5
}
In pcePcepPeerTable {
pcePcepPeerAddrType ipv4(1), --PCE2
pcePcepPeerAddr 2.2.2.2,
pcePcepPeerRole pce(2),
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession true(1),
pcePcepPeerSessionExists true(1)),
pcePcepPeerNumSessSetupOK 0,
pcePcepPeerNumSessSetupFail 1,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime TimeStamp,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime 0,
pcePcepPeerLWMRspTime 0,
pcePcepPeerHWMRspTime 0,
pcePcepPeerNumPCReqSent 4,
pcePcepPeerNumPCReqRcvd 0,
pcePcepPeerNumPCRepSent 0,
pcePcepPeerNumPCRepRcvd 4,
pcePcepPeerNumPCErrSent 0,
pcePcepPeerNumPCErrRcvd 0,
pcePcepPeerNumPCNtfSent 0,
pcePcepPeerNumPCNtfRcvd 0,
pcePcepPeerNumKeepaliveSent 0,
pcePcepPeerNumKeepaliveRcvd 0,
pcePcepPeerNumUnknownRcvd 0,
pcePcepPeerNumCorruptRcvd 0,
pcePcepPeerNumReqSent 4,
pcePcepPeerNumSvecSent 0,
pcePcepPeerNumSvecReqSent 0,
pcePcepPeerNumReqSentPendRep 0,
pcePcepPeerNumReqSentEroRcvd 3,
pcePcepPeerNumReqSentNoPathRcvd 1,
pcePcepPeerNumReqSentCancelRcvd 0,
pcePcepPeerNumReqSentErrorRcvd 0,
pcePcepPeerNumReqSentTimeout 0,
pcePcepPeerNumReqSentCancelSent 0,
pcePcepPeerNumReqSentClosed 0,
pcePcepPeerNumReqRcvd 0,
pcePcepPeerNumSvecRcvd 0,
pcePcepPeerNumSvecReqRcvd 0,
pcePcepPeerNumReqRcvdPendRep 0,
pcePcepPeerNumReqRcvdEroSent 0,
pcePcepPeerNumReqRcvdNoPathSent 0,
pcePcepPeerNumReqRcvdCancelSent 0,
pcePcepPeerNumReqRcvdErrorSent 0,
pcePcepPeerNumReqRcvdCancelRcvd 0,
pcePcepPeerNumReqRcvdClosed 0,
pcePcepPeerNumRepRcvdUnknown 0,
pcePcepPeerNumReqRcvdUnknown 0
},
{
pcePcepPeerAddrType ipv4(1), --PCE3
pcePcepPeerAddr 3.3.3.3,
pcePcepPeerRole pce(2),
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession true(1),
pcePcepPeerSessionExists false(0),
pcePcepPeerNumSessSetupOK 1,
pcePcepPeerNumSessSetupFail 0,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime TimeStamp,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime 200,
pcePcepPeerLWMRspTime 100,
pcePcepPeerHWMRspTime 300,
pcePcepPeerNumPCReqSent 4,
pcePcepPeerNumPCReqRcvd 0,
pcePcepPeerNumPCRepSent 0,
pcePcepPeerNumPCRepRcvd 3,
pcePcepPeerNumPCErrSent 0,
pcePcepPeerNumPCErrRcvd 0,
pcePcepPeerNumPCNtfSent 0,
pcePcepPeerNumPCNtfRcvd 0,
pcePcepPeerNumKeepaliveSent 123,
pcePcepPeerNumKeepaliveRcvd 123,
pcePcepPeerNumUnknownRcvd 0,
pcePcepPeerNumCorruptRcvd 0,
pcePcepPeerNumReqSent 4,
pcePcepPeerNumSvecSent 0,
pcePcepPeerNumSvecReqSent 0,
pcePcepPeerNumReqSentPendRep 0,
pcePcepPeerNumReqSentEroRcvd 3,
pcePcepPeerNumReqSentNoPathRcvd 0,
pcePcepPeerNumReqSentCancelRcvd 0,
pcePcepPeerNumReqSentErrorRcvd 0,
pcePcepPeerNumReqSentTimeout 0,
pcePcepPeerNumReqSentCancelSent 0,
pcePcepPeerNumReqSentClosed 1,
pcePcepPeerNumReqRcvd 0,
pcePcepPeerNumSvecRcvd 0,
pcePcepPeerNumSvecReqRcvd 0,
pcePcepPeerNumReqRcvdPendRep 0,
pcePcepPeerNumReqRcvdEroSent 0,
pcePcepPeerNumReqRcvdNoPathSent 0,
pcePcepPeerNumReqRcvdCancelSent 0,
pcePcepPeerNumReqRcvdErrorSent 0,
pcePcepPeerNumReqRcvdCancelRcvd 0,
pcePcepPeerNumReqRcvdClosed 0,
pcePcepPeerNumRepRcvdUnknown 0,
pcePcepPeerNumReqRcvdUnknown 0
}
In pcePcepSessTable {
pcePcepSessInitiator local(1), --PCE2
pcePcepSessStateLastChange TimeStamp,
pcePcepSessState sessionUp(4),
pcePcepSessConnectRetry 0,
pcePcepSessLocalID 1,
pcePcepSessRemoteID 1,
pcePcepSessKeepaliveTimer 1,
pcePcepSessPeerKeepaliveTimer 1,
pcePcepSessDeadTimer 4,
pcePcepSessPeerDeadTimer 4,
pcePcepSessKAHoldTimeRem 1,
pcePcepSessOverloaded false(0),
pcePcepSessOverloadTime 0,
pcePcepSessPeerOverloaded false(0),
pcePcepSessPeerOverloadTime 0,
pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime 200,
pcePcepSessLWMRspTime 100,
pcePcepSessHWMRspTime 300,
pcePcepSessNumPCReqSent 4,
pcePcepSessNumPCReqRcvd 0,
pcePcepSessNumPCRepSent 0,
pcePcepSessNumPCRepRcvd 4,
pcePcepSessNumPCErrSent 0,
pcePcepSessNumPCErrRcvd 0,
pcePcepSessNumPCNtfSent 0,
pcePcepSessNumPCNtfRcvd 0,
pcePcepSessNumKeepaliveSent 123,
pcePcepSessNumKeepaliveRcvd 123,
pcePcepSessNumUnknownRcvd 0,
pcePcepSessNumCorruptRcvd 0,
pcePcepSessNumReqSent 4,
pcePcepSessNumSvecSent 0,
pcePcepSessNumSvecReqSent 0,
pcePcepSessNumReqSentPendRep 0,
pcePcepSessNumReqSentEroRcvd 3,
pcePcepSessNumReqSentNoPathRcvd 1,
pcePcepSessNumReqSentCancelRcvd 0,
pcePcepSessNumReqSentErrorRcvd 0,
pcePcepSessNumReqSentTimeout 0,
pcePcepSessNumReqSentCancelSent 0,
pcePcepSessNumReqRcvd 0,
pcePcepSessNumSvecRcvd 0,
pcePcepSessNumSvecReqRcvd 0,
pcePcepSessNumReqRcvdPendRep 0,
pcePcepSessNumReqRcvdEroSent 0,
pcePcepSessNumReqRcvdNoPathSent 0,
pcePcepSessNumReqRcvdCancelSent 0,
pcePcepSessNumReqRcvdErrorSent 0,
pcePcepSessNumReqRcvdCancelRcvd 0,
pcePcepSessNumRepRcvdUnknown 0,
pcePcepSessNumReqRcvdUnknown 0
}
-- no session to PCE3
Authors' Addresses Authors' Addresses
A S Kiran Koushik Agrahara Kiran Koushik
Cisco Systems, Inc. Brocade Communications Inc.
EMail: kkoushik@cisco.com EMail: kkoushik@brocade.com
Emile Stephan Emile Stephan
Orange Orange
2 avenue Pierre Marzin 2 avenue Pierre Marzin
Lannion F-22307 Lannion F-22307
France France
EMail: emile.stephan@orange.com EMail: emile.stephan@orange.com
Quintin Zhao Quintin Zhao
 End of changes. 192 change blocks. 
319 lines changed or deleted 1105 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/