draft-ietf-pce-pcep-mib-10.txt   draft-ietf-pce-pcep-mib-11.txt 
PCE Working Group A. Koushik PCE Working Group A. Koushik
Internet-Draft Brocade Communications Inc. Internet-Draft Brocade Communications Inc.
Intended status: Standards Track E. Stephan Intended status: Standards Track E. Stephan
Expires: March 27, 2015 Orange Expires: April 27, 2015 Orange
Q. Zhao Q. Zhao
Huawei Technology Huawei Technology
D. King D. King
Old Dog Consulting Old Dog Consulting
J. Hardwick J. Hardwick
Metaswitch Metaswitch
September 23, 2014 October 24, 2014
Path Computation Element Communications Protocol (PCEP) Management Path Computation Element Communications Protocol (PCEP) Management
Information Base (MIB) Module Information Base (MIB) Module
draft-ietf-pce-pcep-mib-10 draft-ietf-pce-pcep-mib-11
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it describes managed objects for modeling of Path In particular, it describes managed objects for modeling of Path
Computation Element communications Protocol (PCEP) for communications Computation Element communications Protocol (PCEP) for communications
between a Path Computation Client (PCC) and a Path Computation between a Path Computation Client (PCC) and a Path Computation
Element (PCE), or between two PCEs. Element (PCE), or between two PCEs.
skipping to change at page 1, line 43 skipping to change at page 1, line 43
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 27, 2015. This Internet-Draft will expire on April 27, 2015.
Copyright Notice Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
skipping to change at page 5, line 28 skipping to change at page 5, line 31
The pcePcepPeerTable is indexed first by pcePcepEntityIndex, then by The pcePcepPeerTable is indexed first by pcePcepEntityIndex, then by
pcePcepPeerAddrType and pcePcepPeerAddr. This indexing structure pcePcepPeerAddrType and pcePcepPeerAddr. This indexing structure
allows each local PCEP entity to report its own set of peers. allows each local PCEP entity to report its own set of peers.
Since PCEP sessions can be ephemeral, the pcePcepPeerTable tracks a Since PCEP sessions can be ephemeral, the pcePcepPeerTable tracks a
peer even when no PCEP session currently exists to that peer. The peer even when no PCEP session currently exists to that peer. The
statistics contained in pcePcepPeerTable are an aggregate of the statistics contained in pcePcepPeerTable are an aggregate of the
statistics for all successive sessions to that peer. statistics for all successive sessions to that peer.
To limit the quantity of information that is stored, an To limit the quantity of information that is stored, an
implementation MAY choose to discard a row from the implementation MAY choose to discard a row from the pcePcepPeerTable
pcePcepPeerTable if and only if no PCEP session exists to the if and only if no PCEP session exists to the corresponding peer.
corresponding peer.
3.3. pcePcepSessTable 3.3. pcePcepSessTable
The pcePcepSessTable contains one row for each PCEP session that the The pcePcepSessTable contains one row for each PCEP session that the
PCEP entity (PCE or PCC) is currently participating in. Each row is PCEP entity (PCE or PCC) is currently participating in. Each row is
read-only and contains the running configuration that is applied to read-only and contains the running configuration that is applied to
the session, plus identifiers and statistics for the session. the session, plus identifiers and statistics for the session.
The statistics in pcePcepSessTable are semantically different from The statistics in pcePcepSessTable are semantically different from
those in pcePcepPeerTable since the former apply to the current those in pcePcepPeerTable since the former apply to the current
session only, whereas the latter are the aggregate for all sessions session only, whereas the latter are the aggregate for all sessions
that have existed to that peer. that have existed to that peer.
Although [RFC5440] forbids there from being more than one active PCEP Although [RFC5440] forbids there from being more than one active PCEP
session between a given pair of PCEP entities at any one time, there session between a given pair of PCEP entities at any one time, there
is a window during session establishment where the is a window during session establishment where the pcePcepSessTable
pcePcepSessTable may contain two rows for a given peer, one may contain two rows for a given peer, one representing a session
representing a session initiated by the local PCEP entity and one initiated by the local PCEP entity and one representing a session
representing a session initiated by the peer. If either of these initiated by the peer. If either of these sessions reaches active
sessions reaches active state, then the other is discarded. state, then the other is discarded.
The pcePcepSessTable is indexed first by pcePcepEntityIndex, then by The pcePcepSessTable is indexed first by pcePcepEntityIndex, then by
pcePcepPeerAddrType and pcePcepPeerAddr, and finally by pcePcepPeerAddrType and pcePcepPeerAddr, and finally by
pcePcepSessInitiator. This indexing structure allows each local PCEP pcePcepSessInitiator. This indexing structure allows each local PCEP
entity to report its own set of active sessions. The entity to report its own set of active sessions. The
pcePcepSessInitiator index allows two rows to exist transiently for a pcePcepSessInitiator index allows two rows to exist transiently for a
given peer, as discussed above. given peer, as discussed above.
3.4. PCEP Notifications 3.4. PCEP Notifications
skipping to change at page 7, line 45 skipping to change at page 7, line 45
+------------+ +------------+
[1]: A peer entry with no current session [1]: A peer entry with no current session
[2]: Two sessions exist during a window in session [2]: Two sessions exist during a window in session
initialization. initialization.
4. Object Definitions 4. Object Definitions
4.1. PCE-PCEP-MIB 4.1. PCE-PCEP-MIB
PCE-PCEP-MIB DEFINITIONS ::= BEGIN PCE-PCEP-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
mib-2, mib-2,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
Unsigned32, Unsigned32,
Counter32 Counter32
FROM SNMPv2-SMI -- RFC 2578 FROM SNMPv2-SMI -- RFC 2578
TruthValue, TruthValue,
TimeStamp TimeStamp
FROM SNMPv2-TC -- RFC 2579 FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580 FROM SNMPv2-CONF -- RFC 2580
InetAddressType, InetAddressType,
InetAddress InetAddress
FROM INET-ADDRESS-MIB; -- RFC 4001 FROM INET-ADDRESS-MIB; -- RFC 4001
pcePcepMIB MODULE-IDENTITY pcePcepMIB MODULE-IDENTITY
LAST-UPDATED LAST-UPDATED
"201409121200Z" -- 12 September 2014 "201410241200Z" -- 24 October 2014
ORGANIZATION ORGANIZATION
"IETF Path Computation Element (PCE) Working Group" "IETF Path Computation Element (PCE) Working Group"
CONTACT-INFO CONTACT-INFO
"Email: pce@ietf.org "Email: pce@ietf.org
WG charter: WG charter:
http://www.ietf.org/html.charters/pce-charter.html" http://www.ietf.org/html.charters/pce-charter.html"
DESCRIPTION DESCRIPTION
"This MIB module defines a collection of objects for managing "This MIB module defines a collection of objects for managing
Path Computation Element communications Protocol (PCEP). Path Computation Element communications Protocol (PCEP).
Copyright (C) The IETF Trust (2014). This version of this Copyright (C) The IETF Trust (2014). This version of this
MIB module is part of RFC YYYY; see the RFC itself for full MIB module is part of RFC YYYY; see the RFC itself for full
legal notices." legal notices."
-- RFC Ed,: replace YYYY with actual RFC number & remove this note -- RFC Ed,: replace YYYY with actual RFC number & remove this note
REVISION REVISION
"201409121200Z" -- 12 September 2014 "201410241200Z" -- 24 October 2014
DESCRIPTION DESCRIPTION
"Initial version, published as RFC YYYY." "Initial version, published as RFC YYYY."
-- RFC Ed.: replace YYYY with actual RFC number & remove this note -- RFC Ed.: replace YYYY with actual RFC number & remove this note
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed.: replace XXX with IANA-assigned number & remove this note -- RFC Ed.: replace XXX with IANA-assigned number & remove this note
pcePcepNotifications OBJECT IDENTIFIER ::= { pcePcepMIB 0 } pcePcepNotifications OBJECT IDENTIFIER ::= { pcePcepMIB 0 }
pcePcepObjects OBJECT IDENTIFIER ::= { pcePcepMIB 1 } pcePcepObjects OBJECT IDENTIFIER ::= { pcePcepMIB 1 }
pcePcepConformance OBJECT IDENTIFIER ::= { pcePcepMIB 2 } pcePcepConformance OBJECT IDENTIFIER ::= { pcePcepMIB 2 }
-- --
-- PCEP Entity Objects -- PCEP Entity Objects
-- --
pcePcepEntityTable OBJECT-TYPE pcePcepEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepEntityEntry SYNTAX SEQUENCE OF PcePcepEntityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains information about local PCEP entities. "This table contains information about local PCEP entities.
The entries in this table are read-only." The entries in this table are read-only."
::= { pcePcepObjects 1 } ::= { pcePcepObjects 1 }
pcePcepEntityEntry OBJECT-TYPE pcePcepEntityEntry OBJECT-TYPE
SYNTAX PcePcepEntityEntry SYNTAX PcePcepEntityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry represents a local PCEP entity." "This entry represents a local PCEP entity."
INDEX { pcePcepEntityIndex } INDEX { pcePcepEntityIndex }
::= { pcePcepEntityTable 1 } ::= { pcePcepEntityTable 1 }
PcePcepEntityEntry ::= SEQUENCE { PcePcepEntityEntry ::= SEQUENCE {
pcePcepEntityIndex Unsigned32, pcePcepEntityIndex Unsigned32,
pcePcepEntityAdminStatus INTEGER, pcePcepEntityAdminStatus INTEGER,
pcePcepEntityOperStatus INTEGER, pcePcepEntityOperStatus INTEGER,
pcePcepEntityAddrType InetAddressType, pcePcepEntityAddrType InetAddressType,
pcePcepEntityAddr InetAddress, pcePcepEntityAddr InetAddress,
pcePcepEntityConnectTimer Unsigned32, pcePcepEntityConnectTimer Unsigned32,
pcePcepEntityConnectMaxRetry Unsigned32, pcePcepEntityConnectMaxRetry Unsigned32,
pcePcepEntityInitBackoffTimer Unsigned32, pcePcepEntityInitBackoffTimer Unsigned32,
pcePcepEntityMaxBackoffTimer Unsigned32, pcePcepEntityMaxBackoffTimer Unsigned32,
pcePcepEntityOpenWaitTimer Unsigned32, pcePcepEntityOpenWaitTimer Unsigned32,
pcePcepEntityKeepWaitTimer Unsigned32, pcePcepEntityKeepWaitTimer Unsigned32,
pcePcepEntityKeepAliveTimer Unsigned32, pcePcepEntityKeepAliveTimer Unsigned32,
pcePcepEntityDeadTimer Unsigned32, pcePcepEntityDeadTimer Unsigned32,
pcePcepEntityAllowNegotiation TruthValue, pcePcepEntityAllowNegotiation TruthValue,
pcePcepEntityMaxKeepAliveTimer Unsigned32, pcePcepEntityMaxKeepAliveTimer Unsigned32,
pcePcepEntityMaxDeadTimer Unsigned32, pcePcepEntityMaxDeadTimer Unsigned32,
pcePcepEntityMinKeepAliveTimer Unsigned32, pcePcepEntityMinKeepAliveTimer Unsigned32,
pcePcepEntityMinDeadTimer Unsigned32, pcePcepEntityMinDeadTimer Unsigned32,
pcePcepEntitySyncTimer Unsigned32, pcePcepEntitySyncTimer Unsigned32,
pcePcepEntityRequestTimer Unsigned32, pcePcepEntityRequestTimer Unsigned32,
pcePcepEntityMaxSessions Unsigned32, pcePcepEntityMaxSessions Unsigned32,
pcePcepEntityMaxUnknownReqs Unsigned32, pcePcepEntityMaxUnknownReqs Unsigned32,
pcePcepEntityMaxUnknownMsgs Unsigned32 pcePcepEntityMaxUnknownMsgs Unsigned32
} }
pcePcepEntityIndex OBJECT-TYPE pcePcepEntityIndex OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is used to uniquely identify the PCEP entity." "This index is used to uniquely identify the PCEP entity."
::= { pcePcepEntityEntry 1 } ::= { pcePcepEntityEntry 1 }
pcePcepEntityAdminStatus OBJECT-TYPE pcePcepEntityAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
adminStatusUp(1), adminStatusUp(1),
adminStatusDown(2) adminStatusDown(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status of this PCEP Entity. "The administrative status of this PCEP Entity.
This is the desired operational status as currently set by This is the desired operational status as currently set by
an operator or by default in the implementation. The value an operator or by default in the implementation. The value
of pcePcepEntityOperStatus represents the current status of of pcePcepEntityOperStatus represents the current status of
an attempt to reach this desired status." an attempt to reach this desired status."
::= { pcePcepEntityEntry 2 } ::= { pcePcepEntityEntry 2 }
pcePcepEntityOperStatus OBJECT-TYPE pcePcepEntityOperStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
operStatusUp(1), operStatusUp(1),
operStatusDown(2), operStatusDown(2),
operStatusGoingUp(3), operStatusGoingUp(3),
operStatusGoingDown(4), operStatusGoingDown(4),
operStatusFailed(5), operStatusFailed(5),
operStatusFailedPerm(6) operStatusFailedPerm(6)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The operational status of the PCEP entity. Takes one of the "The operational status of the PCEP entity. Takes one of the
following values. following values.
- operStatusUp(1): the PCEP entity is active. - operStatusUp(1): the PCEP entity is active.
- operStatusDown(2): the PCEP entity is inactive. - operStatusDown(2): the PCEP entity is inactive.
- operStatusGoingUp(3): the PCEP entity is activating. - operStatusGoingUp(3): the PCEP entity is activating.
- operStatusGoingDown(4): the PCEP entity is deactivating. - operStatusGoingDown(4): the PCEP entity is deactivating.
- operStatusFailed(5): the PCEP entity has failed and will - operStatusFailed(5): the PCEP entity has failed and will
recover when possible. recover when possible.
- operStatusFailedPerm(6): the PCEP entity has failed and - operStatusFailedPerm(6): the PCEP entity has failed and
will not recover without operator intervention." will not recover without operator intervention."
::= { pcePcepEntityEntry 3 } ::= { pcePcepEntityEntry 3 }
pcePcepEntityAddrType OBJECT-TYPE pcePcepEntityAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the PCEP entity's Internet address. This object "The type of the PCEP entity's Internet address. This object
specifies how the value of the pcePcepEntityAddr object specifies how the value of the pcePcepEntityAddr object
should be interpreted. Only values unknown(0), ipv4(1), or should be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported." ipv6(2) are supported."
::= { pcePcepEntityEntry 4 } ::= { pcePcepEntityEntry 4 }
pcePcepEntityAddr OBJECT-TYPE pcePcepEntityAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local Internet address of this PCEP entity. The type is "The local Internet address of this PCEP entity. The type is
given by pcePcepEntityAddrType. given by pcePcepEntityAddrType.
If operating as a PCE server, the PCEP entity listens on If operating as a PCE server, the PCEP entity listens on
this address. If operating as a PCC, the PCEP entity binds this address. If operating as a PCC, the PCEP entity binds
outgoing TCP connections to this address. outgoing TCP connections to this address.
It is possible for the PCEP entity to operate both as a PCC It is possible for the PCEP entity to operate both as a PCC
and a PCE Server, in which case it uses this address both to and a PCE Server, in which case it uses this address both to
listen for incoming TCP connections and to bind outgoing listen for incoming TCP connections and to bind outgoing
TCP connections." TCP connections."
::= { pcePcepEntityEntry 5 } ::= { pcePcepEntityEntry 5 }
pcePcepEntityConnectTimer OBJECT-TYPE pcePcepEntityConnectTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to establish a TCP "The time that the PCEP entity will wait to establish a TCP
connection with a peer. If a TCP connection is not connection with a peer. If a TCP connection is not
established within this time then PCEP aborts the session established within this time then PCEP aborts the session
setup attempt." setup attempt."
::= { pcePcepEntityEntry 6 } ::= { pcePcepEntityEntry 6 }
pcePcepEntityConnectMaxRetry OBJECT-TYPE pcePcepEntityConnectMaxRetry OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of times the system tries to establish "The maximum number of times the system tries to establish
a TCP connection to a peer before the session with the peer a TCP connection to a peer before the session with the peer
transitions to the idle state. transitions to the idle state.
When the session transitions to the idle state: When the session transitions to the idle state:
- pcePcepPeerSessionExists transitions to false(2) - pcePcepPeerSessionExists transitions to false(2)
- the associated PcePcepSessEntry is deleted - the associated PcePcepSessEntry is deleted
- a backoff timer runs before the session is tried again." - a backoff timer runs before the session is tried again."
::= { pcePcepEntityEntry 7 } ::= { pcePcepEntityEntry 7 }
pcePcepEntityInitBackoffTimer OBJECT-TYPE pcePcepEntityInitBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The initial back-off time for retrying a failed session "The initial back-off time for retrying a failed session
setup attempt to a peer. setup attempt to a peer.
The back-off time increases for each failed session setup The back-off time increases for each failed session setup
attempt, until a maximum back-off time is reached. The attempt, until a maximum back-off time is reached. The
maximum back-off time is pcePcepEntityMaxBackoffTimer." maximum back-off time is pcePcepEntityMaxBackoffTimer."
::= { pcePcepEntityEntry 8 } ::= { pcePcepEntityEntry 8 }
pcePcepEntityMaxBackoffTimer OBJECT-TYPE pcePcepEntityMaxBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum back-off time for retrying a failed session "The maximum back-off time for retrying a failed session
setup attempt to a peer. setup attempt to a peer.
The back-off time increases for each failed session setup The back-off time increases for each failed session setup
attempt, until this maximum value is reached. Session attempt, until this maximum value is reached. Session
setup attempts then repeat periodically without any setup attempts then repeat periodically without any
further increase in back-off time." further increase in back-off time."
::= { pcePcepEntityEntry 9 } ::= { pcePcepEntityEntry 9 }
pcePcepEntityOpenWaitTimer OBJECT-TYPE pcePcepEntityOpenWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to receive an Open "The time that the PCEP entity will wait to receive an Open
message from a peer after the TCP connection has come up. message from a peer after the TCP connection has come up.
If no Open message is received within this time then PCEP If no Open message is received within this time then PCEP
terminates the TCP connection and deletes the associated terminates the TCP connection and deletes the associated
PcePcepSessEntry." PcePcepSessEntry."
::= { pcePcepEntityEntry 10 } ::= { pcePcepEntityEntry 10 }
pcePcepEntityKeepWaitTimer OBJECT-TYPE pcePcepEntityKeepWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time that the PCEP entity will wait to receive a "The time that the PCEP entity will wait to receive a
Keepalive or PCErr message from a peer during session Keepalive or PCErr message from a peer during session
initialization after receiving an Open message. If no initialization after receiving an Open message. If no
Keepalive or PCErr message is received within this time then Keepalive or PCErr message is received within this time then
PCEP terminates the TCP connection and deletes the PCEP terminates the TCP connection and deletes the
associated PcePcepSessEntry." associated PcePcepSessEntry."
::= { pcePcepEntityEntry 11 } ::= { pcePcepEntityEntry 11 }
pcePcepEntityKeepAliveTimer OBJECT-TYPE pcePcepEntityKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The keep alive transmission timer that this PCEP entity will "The keep alive transmission timer that this PCEP entity will
propose in the initial OPEN message of each session it is propose in the initial OPEN message of each session it is
involved in. This is the maximum time between two involved in. This is the maximum time between two
consecutive messages sent to a peer. Zero means that consecutive messages sent to a peer. Zero means that
the PCEP entity prefers not to send Keepalives at all. the PCEP entity prefers not to send Keepalives at all.
Note that the actual Keepalive transmission intervals, in Note that the actual Keepalive transmission intervals, in
either direction of an active PCEP session, are determined either direction of an active PCEP session, are determined
by negotiation between the peers as specified by RFC by negotiation between the peers as specified by RFC
5440, and so may differ from this configured value. For 5440, and so may differ from this configured value. For
the actually negotiated values (per-session), see the actually negotiated values (per-session), see
pcePcepSessKeepaliveTimer and pcePcepSessKeepaliveTimer and
pcePcepSessPeerKeepaliveTimer." pcePcepSessPeerKeepaliveTimer."
::= { pcePcepEntityEntry 12 } ::= { pcePcepEntityEntry 12 }
pcePcepEntityDeadTimer OBJECT-TYPE pcePcepEntityDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The dead timer that this PCEP entity will propose in the "The dead timer that this PCEP entity will propose in the
initial OPEN message of each session it is involved in. initial OPEN message of each session it is involved in.
This is the time after which a peer should declare a This is the time after which a peer should declare a
session down if it does not receive any PCEP messages. session down if it does not receive any PCEP messages.
Zero suggests that the peer does not run a dead timer at Zero suggests that the peer does not run a dead timer at
all." all."
::= { pcePcepEntityEntry 13 } ::= { pcePcepEntityEntry 13 }
pcePcepEntityAllowNegotiation OBJECT-TYPE pcePcepEntityAllowNegotiation OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Whether the PCEP entity will permit negotiation of session "Whether the PCEP entity will permit negotiation of session
parameters." parameters."
::= { pcePcepEntityEntry 14 } ::= { pcePcepEntityEntry 14 }
pcePcepEntityMaxKeepAliveTimer OBJECT-TYPE pcePcepEntityMaxKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the maximum value "In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the that this PCEP entity will accept from a peer for the
interval between Keepalive transmissions. Zero means that interval between Keepalive transmissions. Zero means that
the PCEP entity will allow no Keepalive transmission at the PCEP entity will allow no Keepalive transmission at
all." all."
::= { pcePcepEntityEntry 15 } ::= { pcePcepEntityEntry 15 }
pcePcepEntityMaxDeadTimer OBJECT-TYPE pcePcepEntityMaxDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the maximum value "In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the Dead that this PCEP entity will accept from a peer for the Dead
timer. Zero means that the PCEP entity will allow not timer. Zero means that the PCEP entity will allow not
running a Dead timer." running a Dead timer."
::= { pcePcepEntityEntry 16 } ::= { pcePcepEntityEntry 16 }
pcePcepEntityMinKeepAliveTimer OBJECT-TYPE pcePcepEntityMinKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the minimum value "In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the interval between that this PCEP entity will accept for the interval between
Keepalive transmissions. Zero means that the PCEP entity Keepalive transmissions. Zero means that the PCEP entity
insists on no Keepalive transmission at all." insists on no Keepalive transmission at all."
::= { pcePcepEntityEntry 17 } ::= { pcePcepEntityEntry 17 }
pcePcepEntityMinDeadTimer OBJECT-TYPE pcePcepEntityMinDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"In PCEP session parameter negotiation, the minimum value "In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the Dead timer. Zero that this PCEP entity will accept for the Dead timer. Zero
means that the PCEP entity insists on not running a Dead means that the PCEP entity insists on not running a Dead
timer." timer."
::= { pcePcepEntityEntry 18 } ::= { pcePcepEntityEntry 18 }
pcePcepEntitySyncTimer OBJECT-TYPE pcePcepEntitySyncTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of SyncTimer is used in the case of synchronized "The value of SyncTimer is used in the case of synchronized
path computation request using the SVEC object. path computation request using the SVEC object.
Consider the case where a PCReq message is received by a PCE Consider the case where a PCReq message is received by a PCE
that contains the SVEC object referring to M synchronized that contains the SVEC object referring to M synchronized
path computation requests. If after the expiration of the path computation requests. If after the expiration of the
SyncTimer all the M path computation requests have not been SyncTimer all the M path computation requests have not been
received, a protocol error is triggered and the PCE MUST received, a protocol error is triggered and the PCE MUST
cancel the whole set of path computation requests. cancel the whole set of path computation requests.
The aim of the SyncTimer is to avoid the storage of unused The aim of the SyncTimer is to avoid the storage of unused
synchronized requests should one of them get lost for some synchronized requests should one of them get lost for some
reasons (for example, a misbehaving PCC). reasons (for example, a misbehaving PCC).
A value of zero is returned if and only if the entity does A value of zero is returned if and only if the entity does
not use the SyncTimer." not use the SyncTimer."
::= { pcePcepEntityEntry 19 } ::= { pcePcepEntityEntry 19 }
pcePcepEntityRequestTimer OBJECT-TYPE pcePcepEntityRequestTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535) SYNTAX Unsigned32 (1..65535)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum time that the PCEP entity will wait for a "The maximum time that the PCEP entity will wait for a
response to a PCReq message." response to a PCReq message."
::= { pcePcepEntityEntry 20 } ::= { pcePcepEntityEntry 20 }
pcePcepEntityMaxSessions OBJECT-TYPE pcePcepEntityMaxSessions OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum number of sessions involving this PCEP entity "Maximum number of sessions involving this PCEP entity
that can exist at any time." that can exist at any time."
::= { pcePcepEntityEntry 21 } ::= { pcePcepEntityEntry 21 }
pcePcepEntityMaxUnknownReqs OBJECT-TYPE pcePcepEntityMaxUnknownReqs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of unrecognized requests and replies that "The maximum number of unrecognized requests and replies that
any session on this PCEP entity is willing to accept per any session on this PCEP entity is willing to accept per
minute before terminating the session. minute before terminating the session.
A PCRep message contains an unrecognized reply if it A PCRep message contains an unrecognized reply if it
contains an RP object whose request ID does not correspond contains an RP object whose request ID does not correspond
to any in-progress request sent by this PCEP entity. to any in-progress request sent by this PCEP entity.
A PCReq message contains an unrecognized request if it A PCReq message contains an unrecognized request if it
contains an RP object whose request ID is zero." contains an RP object whose request ID is zero."
::= { pcePcepEntityEntry 22 } ::= { pcePcepEntityEntry 22 }
pcePcepEntityMaxUnknownMsgs OBJECT-TYPE pcePcepEntityMaxUnknownMsgs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of unknown messages that any session "The maximum number of unknown messages that any session
on this PCEP entity is willing to accept per minute before on this PCEP entity is willing to accept per minute before
terminating the session." terminating the session."
::= { pcePcepEntityEntry 23 } ::= { pcePcepEntityEntry 23 }
-- --
-- The PCEP Peer Table -- The PCEP Peer Table
-- --
pcePcepPeerTable OBJECT-TYPE pcePcepPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepPeerEntry SYNTAX SEQUENCE OF PcePcepPeerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains information about peers known by "This table contains information about peers known by
the local PCEP entity. The entries in this table are the local PCEP entity. The entries in this table are
read-only. read-only.
This table gives peer information that spans PCEP This table gives peer information that spans PCEP
sessions. Information about current PCEP sessions can be sessions. Information about current PCEP sessions can be
found in the pcePcepSessTable table." found in the pcePcepSessTable table."
::= { pcePcepObjects 2 } ::= { pcePcepObjects 2 }
pcePcepPeerEntry OBJECT-TYPE pcePcepPeerEntry OBJECT-TYPE
SYNTAX PcePcepPeerEntry SYNTAX PcePcepPeerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about a single peer which spans all PCEP "Information about a single peer which spans all PCEP
sessions to that peer." sessions to that peer."
INDEX { pcePcepEntityIndex, INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType, pcePcepPeerAddrType,
pcePcepPeerAddr } pcePcepPeerAddr }
::= { pcePcepPeerTable 1 } ::= { pcePcepPeerTable 1 }
PcePcepPeerEntry ::= SEQUENCE { PcePcepPeerEntry ::= SEQUENCE {
pcePcepPeerAddrType InetAddressType, pcePcepPeerAddrType InetAddressType,
pcePcepPeerAddr InetAddress, pcePcepPeerAddr InetAddress,
pcePcepPeerRole INTEGER, pcePcepPeerRole INTEGER,
pcePcepPeerDiscontinuityTime TimeStamp, pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession TruthValue, pcePcepPeerInitiateSession TruthValue,
pcePcepPeerSessionExists TruthValue, pcePcepPeerSessionExists TruthValue,
pcePcepPeerNumSessSetupOK Counter32, pcePcepPeerNumSessSetupOK Counter32,
pcePcepPeerNumSessSetupFail Counter32, pcePcepPeerNumSessSetupFail Counter32,
pcePcepPeerSessionUpTime TimeStamp, pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime TimeStamp, pcePcepPeerSessionFailTime TimeStamp,
pcePcepPeerSessionFailUpTime TimeStamp, pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime Unsigned32, pcePcepPeerAvgRspTime Unsigned32,
pcePcepPeerLWMRspTime Unsigned32, pcePcepPeerLWMRspTime Unsigned32,
pcePcepPeerHWMRspTime Unsigned32, pcePcepPeerHWMRspTime Unsigned32,
pcePcepPeerNumPCReqSent Counter32, pcePcepPeerNumPCReqSent Counter32,
pcePcepPeerNumPCReqRcvd Counter32, pcePcepPeerNumPCReqRcvd Counter32,
pcePcepPeerNumPCRepSent Counter32, pcePcepPeerNumPCRepSent Counter32,
pcePcepPeerNumPCRepRcvd Counter32, pcePcepPeerNumPCRepRcvd Counter32,
pcePcepPeerNumPCErrSent Counter32, pcePcepPeerNumPCErrSent Counter32,
pcePcepPeerNumPCErrRcvd Counter32, pcePcepPeerNumPCErrRcvd Counter32,
pcePcepPeerNumPCNtfSent Counter32, pcePcepPeerNumPCNtfSent Counter32,
pcePcepPeerNumPCNtfRcvd Counter32, pcePcepPeerNumPCNtfRcvd Counter32,
pcePcepPeerNumKeepaliveSent Counter32, pcePcepPeerNumKeepaliveSent Counter32,
pcePcepPeerNumKeepaliveRcvd Counter32, pcePcepPeerNumKeepaliveRcvd Counter32,
pcePcepPeerNumUnknownRcvd Counter32, pcePcepPeerNumUnknownRcvd Counter32,
pcePcepPeerNumCorruptRcvd Counter32, pcePcepPeerNumCorruptRcvd Counter32,
pcePcepPeerNumReqSent Counter32, pcePcepPeerNumReqSent Counter32,
pcePcepPeerNumSvecSent Counter32, pcePcepPeerNumSvecSent Counter32,
pcePcepPeerNumSvecReqSent Counter32, pcePcepPeerNumSvecReqSent Counter32,
pcePcepPeerNumReqSentPendRep Counter32, pcePcepPeerNumReqSentPendRep Counter32,
pcePcepPeerNumReqSentEroRcvd Counter32, pcePcepPeerNumReqSentEroRcvd Counter32,
pcePcepPeerNumReqSentNoPathRcvd Counter32, pcePcepPeerNumReqSentNoPathRcvd Counter32,
pcePcepPeerNumReqSentCancelRcvd Counter32, pcePcepPeerNumReqSentCancelRcvd Counter32,
pcePcepPeerNumReqSentErrorRcvd Counter32, pcePcepPeerNumReqSentErrorRcvd Counter32,
pcePcepPeerNumReqSentTimeout Counter32, pcePcepPeerNumReqSentTimeout Counter32,
pcePcepPeerNumReqSentCancelSent Counter32, pcePcepPeerNumReqSentCancelSent Counter32,
pcePcepPeerNumReqSentClosed Counter32, pcePcepPeerNumReqSentClosed Counter32,
pcePcepPeerNumReqRcvd Counter32, pcePcepPeerNumReqRcvd Counter32,
pcePcepPeerNumSvecRcvd Counter32, pcePcepPeerNumSvecRcvd Counter32,
pcePcepPeerNumSvecReqRcvd Counter32, pcePcepPeerNumSvecReqRcvd Counter32,
pcePcepPeerNumReqRcvdPendRep Counter32, pcePcepPeerNumReqRcvdPendRep Counter32,
pcePcepPeerNumReqRcvdEroSent Counter32, pcePcepPeerNumReqRcvdEroSent Counter32,
pcePcepPeerNumReqRcvdNoPathSent Counter32, pcePcepPeerNumReqRcvdNoPathSent Counter32,
pcePcepPeerNumReqRcvdCancelSent Counter32, pcePcepPeerNumReqRcvdCancelSent Counter32,
pcePcepPeerNumReqRcvdErrorSent Counter32, pcePcepPeerNumReqRcvdErrorSent Counter32,
pcePcepPeerNumReqRcvdCancelRcvd Counter32, pcePcepPeerNumReqRcvdCancelRcvd Counter32,
pcePcepPeerNumReqRcvdClosed Counter32, pcePcepPeerNumReqRcvdClosed Counter32,
pcePcepPeerNumRepRcvdUnknown Counter32, pcePcepPeerNumRepRcvdUnknown Counter32,
pcePcepPeerNumReqRcvdUnknown Counter32 pcePcepPeerNumReqRcvdUnknown Counter32
} }
pcePcepPeerAddrType OBJECT-TYPE pcePcepPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the peer's Internet address. This object "The type of the peer's Internet address. This object
specifies how the value of the pcePcepPeerAddr object should specifies how the value of the pcePcepPeerAddr object should
be interpreted. Only values unknown(0), ipv4(1), or be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported." ipv6(2) are supported."
::= { pcePcepPeerEntry 1 } ::= { pcePcepPeerEntry 1 }
pcePcepPeerAddr OBJECT-TYPE pcePcepPeerAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Internet address of the peer. The type is given by "The Internet address of the peer. The type is given by
pcePcepPeerAddrType." pcePcepPeerAddrType."
::= { pcePcepPeerEntry 2 } ::= { pcePcepPeerEntry 2 }
pcePcepPeerRole OBJECT-TYPE pcePcepPeerRole OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0), unknown(0),
pcc(1), pcc(1),
pce(2), pce(2),
pccAndPce(3) pccAndPce(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The role that this peer took the last time a session was "The role that this peer took the last time a session was
established. Takes one of the following values. established. Takes one of the following values.
- unknown(0): this peer's role is not known. - unknown(0): this peer's role is not known.
- pcc(1): this peer is a Path Computation Client (PCC). - pcc(1): this peer is a Path Computation Client (PCC).
- pce(2): this peer is a Path Computation Server (PCE). - pce(2): this peer is a Path Computation Server (PCE).
- pccAndPce(3): this peer is both a PCC and a PCE." - pccAndPce(3): this peer is both a PCC and a PCE."
::= { pcePcepPeerEntry 3 } ::= { pcePcepPeerEntry 3 }
pcePcepPeerDiscontinuityTime OBJECT-TYPE pcePcepPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at the time that the information and "The value of sysUpTime at the time that the information and
statistics in this row were last reset." statistics in this row were last reset."
::= { pcePcepPeerEntry 4 } ::= { pcePcepPeerEntry 4 }
pcePcepPeerInitiateSession OBJECT-TYPE pcePcepPeerInitiateSession OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the local PCEP entity initiates sessions "Indicates whether the local PCEP entity initiates sessions
to this peer, or waits for the peer to initiate a session." to this peer, or waits for the peer to initiate a session."
::= { pcePcepPeerEntry 5 } ::= { pcePcepPeerEntry 5 }
pcePcepPeerSessionExists OBJECT-TYPE pcePcepPeerSessionExists OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether a session with this peer currently "Indicates whether a session with this peer currently
exists." exists."
::= { pcePcepPeerEntry 6 } ::= { pcePcepPeerEntry 6 }
pcePcepPeerNumSessSetupOK OBJECT-TYPE pcePcepPeerNumSessSetupOK OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCEP sessions successfully established with "The number of PCEP sessions successfully established with
the peer, including any current session. This counter is the peer, including any current session. This counter is
incremented each time a session with this peer is incremented each time a session with this peer is
successfully established." successfully established."
::= { pcePcepPeerEntry 7 } ::= { pcePcepPeerEntry 7 }
pcePcepPeerNumSessSetupFail OBJECT-TYPE pcePcepPeerNumSessSetupFail OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCEP sessions with the peer that have been "The number of PCEP sessions with the peer that have been
attempted but failed before being fully established. attempted but failed before being fully established.
This counter is incremented each time a session retry to This counter is incremented each time a session retry to
this peer fails." this peer fails."
::= { pcePcepPeerEntry 8 } ::= { pcePcepPeerEntry 8 }
pcePcepPeerSessionUpTime OBJECT-TYPE pcePcepPeerSessionUpTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime the last time a session with this "The value of sysUpTime the last time a session with this
peer was successfully established. peer was successfully established.
If pcePcepPeerNumSessSetupOK is zero, then this object If pcePcepPeerNumSessSetupOK is zero, then this object
contains zero." contains zero."
::= { pcePcepPeerEntry 9 } ::= { pcePcepPeerEntry 9 }
pcePcepPeerSessionFailTime OBJECT-TYPE pcePcepPeerSessionFailTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime the last time a session with this "The value of sysUpTime the last time a session with this
peer failed to be established. peer failed to be established.
If pcePcepPeerNumSessSetupFail is zero, then this object If pcePcepPeerNumSessSetupFail is zero, then this object
contains zero." contains zero."
::= { pcePcepPeerEntry 10 } ::= { pcePcepPeerEntry 10 }
pcePcepPeerSessionFailUpTime OBJECT-TYPE pcePcepPeerSessionFailUpTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime the last time a session with this "The value of sysUpTime the last time a session with this
peer failed from active. peer failed from active.
If pcePcepPeerNumSessSetupOK is zero, then this object If pcePcepPeerNumSessSetupOK is zero, then this object
contains zero." contains zero."
::= { pcePcepPeerEntry 11 } ::= { pcePcepPeerEntry 11 }
pcePcepPeerAvgRspTime OBJECT-TYPE pcePcepPeerAvgRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The average response time for this peer. "The average response time for this peer.
If an average response time has not been calculated for this If an average response time has not been calculated for this
peer then this object has the value zero. peer then this object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 12 } ::= { pcePcepPeerEntry 12 }
pcePcepPeerLWMRspTime OBJECT-TYPE pcePcepPeerLWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The smallest (low-water mark) response time seen from this "The smallest (low-water mark) response time seen from this
peer. peer.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero. object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 13 } ::= { pcePcepPeerEntry 13 }
pcePcepPeerHWMRspTime OBJECT-TYPE pcePcepPeerHWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The greatest (high-water mark) response time seen from this "The greatest (high-water mark) response time seen from this
peer. peer.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero. object has the value zero.
If pcePcepPeerRole is pcc then this field is meaningless and If pcePcepPeerRole is pcc then this field is meaningless and
is set to zero." is set to zero."
::= { pcePcepPeerEntry 14 } ::= { pcePcepPeerEntry 14 }
pcePcepPeerNumPCReqSent OBJECT-TYPE pcePcepPeerNumPCReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages sent to this peer." "The number of PCReq messages sent to this peer."
::= { pcePcepPeerEntry 15 } ::= { pcePcepPeerEntry 15 }
pcePcepPeerNumPCReqRcvd OBJECT-TYPE pcePcepPeerNumPCReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages received from this peer." "The number of PCReq messages received from this peer."
::= { pcePcepPeerEntry 16 } ::= { pcePcepPeerEntry 16 }
pcePcepPeerNumPCRepSent OBJECT-TYPE pcePcepPeerNumPCRepSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages sent to this peer." "The number of PCRep messages sent to this peer."
::= { pcePcepPeerEntry 17 } ::= { pcePcepPeerEntry 17 }
pcePcepPeerNumPCRepRcvd OBJECT-TYPE pcePcepPeerNumPCRepRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages received from this peer." "The number of PCRep messages received from this peer."
::= { pcePcepPeerEntry 18 } ::= { pcePcepPeerEntry 18 }
pcePcepPeerNumPCErrSent OBJECT-TYPE pcePcepPeerNumPCErrSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages sent to this peer." "The number of PCErr messages sent to this peer."
::= { pcePcepPeerEntry 19 } ::= { pcePcepPeerEntry 19 }
pcePcepPeerNumPCErrRcvd OBJECT-TYPE pcePcepPeerNumPCErrRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages received from this peer." "The number of PCErr messages received from this peer."
::= { pcePcepPeerEntry 20 } ::= { pcePcepPeerEntry 20 }
pcePcepPeerNumPCNtfSent OBJECT-TYPE pcePcepPeerNumPCNtfSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages sent to this peer." "The number of PCNtf messages sent to this peer."
::= { pcePcepPeerEntry 21 } ::= { pcePcepPeerEntry 21 }
pcePcepPeerNumPCNtfRcvd OBJECT-TYPE pcePcepPeerNumPCNtfRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages received from this peer." "The number of PCNtf messages received from this peer."
::= { pcePcepPeerEntry 22 } ::= { pcePcepPeerEntry 22 }
pcePcepPeerNumKeepaliveSent OBJECT-TYPE pcePcepPeerNumKeepaliveSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages sent to this peer." "The number of Keepalive messages sent to this peer."
::= { pcePcepPeerEntry 23 } ::= { pcePcepPeerEntry 23 }
pcePcepPeerNumKeepaliveRcvd OBJECT-TYPE pcePcepPeerNumKeepaliveRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages received from this peer." "The number of Keepalive messages received from this peer."
::= { pcePcepPeerEntry 24 } ::= { pcePcepPeerEntry 24 }
pcePcepPeerNumUnknownRcvd OBJECT-TYPE pcePcepPeerNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown messages received from this peer." "The number of unknown messages received from this peer."
::= { pcePcepPeerEntry 25 } ::= { pcePcepPeerEntry 25 }
pcePcepPeerNumCorruptRcvd OBJECT-TYPE pcePcepPeerNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of corrupted PCEP message received from this "The number of corrupted PCEP message received from this
peer." peer."
::= { pcePcepPeerEntry 26 } ::= { pcePcepPeerEntry 26 }
pcePcepPeerNumReqSent OBJECT-TYPE pcePcepPeerNumReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent to this peer. A request "The number of requests sent to this peer. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqSent because This might be greater than pcePcepPeerNumPCReqSent because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepPeerEntry 27 } ::= { pcePcepPeerEntry 27 }
pcePcepPeerNumSvecSent OBJECT-TYPE pcePcepPeerNumSvecSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects sent to this peer in PCReq "The number of SVEC objects sent to this peer in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepPeerEntry 28 } ::= { pcePcepPeerEntry 28 }
pcePcepPeerNumSvecReqSent OBJECT-TYPE pcePcepPeerNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent to this peer that appeared in "The number of requests sent to this peer that appeared in
one or more SVEC objects." one or more SVEC objects."
::= { pcePcepPeerEntry 29 } ::= { pcePcepPeerEntry 29 }
pcePcepPeerNumReqSentPendRep OBJECT-TYPE pcePcepPeerNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response is still pending." which a response is still pending."
::= { pcePcepPeerEntry 30 } ::= { pcePcepPeerEntry 30 }
pcePcepPeerNumReqSentEroRcvd OBJECT-TYPE pcePcepPeerNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response with an ERO object was received. Such which a response with an ERO object was received. Such
responses indicate that a path was successfully computed by responses indicate that a path was successfully computed by
the peer." the peer."
::= { pcePcepPeerEntry 31 } ::= { pcePcepPeerEntry 31 }
pcePcepPeerNumReqSentNoPathRcvd OBJECT-TYPE pcePcepPeerNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to this peer for "The number of requests that have been sent to this peer for
which a response with a NO-PATH object was received. Such which a response with a NO-PATH object was received. Such
responses indicate that the peer could not find a path to responses indicate that the peer could not find a path to
satisfy the request." satisfy the request."
::= { pcePcepPeerEntry 32 } ::= { pcePcepPeerEntry 32 }
pcePcepPeerNumReqSentCancelRcvd OBJECT-TYPE pcePcepPeerNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were cancelled by the peer with "The number of requests that were cancelled by the peer with
a PCNtf message. a PCNtf message.
This might be different than pcePcepPeerNumPCNtfRcvd because This might be different than pcePcepPeerNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 33 } ::= { pcePcepPeerEntry 33 }
pcePcepPeerNumReqSentErrorRcvd OBJECT-TYPE pcePcepPeerNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were rejected by the peer with a "The number of requests that were rejected by the peer with a
PCErr message. PCErr message.
This might be different than pcePcepPeerNumPCErrRcvd because This might be different than pcePcepPeerNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 34 } ::= { pcePcepPeerEntry 34 }
pcePcepPeerNumReqSentTimeout OBJECT-TYPE pcePcepPeerNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent to a peer and "The number of requests that have been sent to a peer and
have been abandoned because the peer has taken too long to have been abandoned because the peer has taken too long to
respond to them." respond to them."
::= { pcePcepPeerEntry 35 } ::= { pcePcepPeerEntry 35 }
pcePcepPeerNumReqSentCancelSent OBJECT-TYPE pcePcepPeerNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were sent to the peer and "The number of requests that were sent to the peer and
explicitly canceled by the local PCEP entity sending a explicitly canceled by the local PCEP entity sending a
PCNtf." PCNtf."
::= { pcePcepPeerEntry 36 } ::= { pcePcepPeerEntry 36 }
pcePcepPeerNumReqSentClosed OBJECT-TYPE pcePcepPeerNumReqSentClosed OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were sent to the peer and "The number of requests that were sent to the peer and
implicitly canceled when the session they were sent over was implicitly canceled when the session they were sent over was
closed." closed."
::= { pcePcepPeerEntry 37 } ::= { pcePcepPeerEntry 37 }
pcePcepPeerNumReqRcvd OBJECT-TYPE pcePcepPeerNumReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer. A request "The number of requests received from this peer. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqRcvd because This might be greater than pcePcepPeerNumPCReqRcvd because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepPeerEntry 38 } ::= { pcePcepPeerEntry 38 }
pcePcepPeerNumSvecRcvd OBJECT-TYPE pcePcepPeerNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects received from this peer in PCReq "The number of SVEC objects received from this peer in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepPeerEntry 39 } ::= { pcePcepPeerEntry 39 }
pcePcepPeerNumSvecReqRcvd OBJECT-TYPE pcePcepPeerNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that appeared "The number of requests received from this peer that appeared
in one or more SVEC objects." in one or more SVEC objects."
::= { pcePcepPeerEntry 40 } ::= { pcePcepPeerEntry 40 }
pcePcepPeerNumReqRcvdPendRep OBJECT-TYPE pcePcepPeerNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response is still pending." peer for which a response is still pending."
::= { pcePcepPeerEntry 41 } ::= { pcePcepPeerEntry 41 }
pcePcepPeerNumReqRcvdEroSent OBJECT-TYPE pcePcepPeerNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response with an ERO object was sent. Such peer for which a response with an ERO object was sent. Such
responses indicate that a path was successfully computed by responses indicate that a path was successfully computed by
the local PCEP entity." the local PCEP entity."
::= { pcePcepPeerEntry 42 } ::= { pcePcepPeerEntry 42 }
pcePcepPeerNumReqRcvdNoPathSent OBJECT-TYPE pcePcepPeerNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received from this "The number of requests that have been received from this
peer for which a response with a NO-PATH object was sent. peer for which a response with a NO-PATH object was sent.
Such responses indicate that the local PCEP entity could Such responses indicate that the local PCEP entity could
not find a path to satisfy the request." not find a path to satisfy the request."
::= { pcePcepPeerEntry 43 } ::= { pcePcepPeerEntry 43 }
pcePcepPeerNumReqRcvdCancelSent OBJECT-TYPE pcePcepPeerNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that were "The number of requests received from this peer that were
cancelled by the local PCEP entity sending a PCNtf message. cancelled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepPeerNumPCNtfSent because This might be different than pcePcepPeerNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 44 } ::= { pcePcepPeerEntry 44 }
pcePcepPeerNumReqRcvdErrorSent OBJECT-TYPE pcePcepPeerNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received from this peer that were "The number of requests received from this peer that were
rejected by the local PCEP entity sending a PCErr message. rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepPeerNumPCErrSent because This might be different than pcePcepPeerNumPCErrSent because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 45 } ::= { pcePcepPeerEntry 45 }
pcePcepPeerNumReqRcvdCancelRcvd OBJECT-TYPE pcePcepPeerNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received from the peer and "The number of requests that were received from the peer and
explicitly canceled by the peer sending a PCNtf." explicitly canceled by the peer sending a PCNtf."
::= { pcePcepPeerEntry 46 } ::= { pcePcepPeerEntry 46 }
pcePcepPeerNumReqRcvdClosed OBJECT-TYPE pcePcepPeerNumReqRcvdClosed OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received from the peer and "The number of requests that were received from the peer and
implicitly canceled when the session they were received over implicitly canceled when the session they were received over
was closed." was closed."
::= { pcePcepPeerEntry 47 } ::= { pcePcepPeerEntry 47 }
pcePcepPeerNumRepRcvdUnknown OBJECT-TYPE pcePcepPeerNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of responses to unknown requests received from "The number of responses to unknown requests received from
this peer. A response to an unknown request is a response this peer. A response to an unknown request is a response
whose RP object does not contain the request ID of any whose RP object does not contain the request ID of any
request that is currently outstanding on the session." request that is currently outstanding on the session."
::= { pcePcepPeerEntry 48 } ::= { pcePcepPeerEntry 48 }
pcePcepPeerNumReqRcvdUnknown OBJECT-TYPE pcePcepPeerNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown requests that have been received from "The number of unknown requests that have been received from
a peer. An unknown request is a request whose RP object a peer. An unknown request is a request whose RP object
contains a request ID of zero." contains a request ID of zero."
::= { pcePcepPeerEntry 49 } ::= { pcePcepPeerEntry 49 }
-- --
-- The PCEP Sessions Table -- The PCEP Sessions Table
-- --
pcePcepSessTable OBJECT-TYPE pcePcepSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepSessEntry SYNTAX SEQUENCE OF PcePcepSessEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of PCEP sessions that involve the local PCEP "A table of PCEP sessions that involve the local PCEP
entity. Each entry in this table represents a single entity. Each entry in this table represents a single
session. The entries in this table are read-only. session. The entries in this table are read-only.
An entry appears in this table when the corresponding PCEP An entry appears in this table when the corresponding PCEP
session transitions out of idle state. If the PCEP session session transitions out of idle state. If the PCEP session
transitions back into idle state then the corresponding transitions back into idle state then the corresponding
entry in this table is removed." entry in this table is removed."
::= { pcePcepObjects 3 } ::= { pcePcepObjects 3 }
pcePcepSessEntry OBJECT-TYPE pcePcepSessEntry OBJECT-TYPE
SYNTAX PcePcepSessEntry SYNTAX PcePcepSessEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry represents a single PCEP session in which the "This entry represents a single PCEP session in which the
local PCEP entity participates. local PCEP entity participates.
This entry exists only if the corresponding PCEP session has This entry exists only if the corresponding PCEP session has
been initialized by some event, such as manual user been initialized by some event, such as manual user
configuration, autodiscovery of a peer, or an incoming TCP configuration, autodiscovery of a peer, or an incoming TCP
connection." connection."
INDEX { pcePcepEntityIndex, INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType, pcePcepPeerAddrType,
pcePcepPeerAddr, pcePcepPeerAddr,
pcePcepSessInitiator } pcePcepSessInitiator }
::= { pcePcepSessTable 1 } ::= { pcePcepSessTable 1 }
PcePcepSessEntry ::= SEQUENCE { PcePcepSessEntry ::= SEQUENCE {
pcePcepSessInitiator INTEGER, pcePcepSessInitiator INTEGER,
pcePcepSessStateLastChange TimeStamp, pcePcepSessStateLastChange TimeStamp,
pcePcepSessState INTEGER, pcePcepSessState INTEGER,
pcePcepSessConnectRetry Counter32, pcePcepSessConnectRetry Counter32,
pcePcepSessLocalID Unsigned32, pcePcepSessLocalID Unsigned32,
pcePcepSessRemoteID Unsigned32, pcePcepSessRemoteID Unsigned32,
pcePcepSessKeepaliveTimer Unsigned32, pcePcepSessKeepaliveTimer Unsigned32,
pcePcepSessPeerKeepaliveTimer Unsigned32, pcePcepSessPeerKeepaliveTimer Unsigned32,
pcePcepSessDeadTimer Unsigned32, pcePcepSessDeadTimer Unsigned32,
pcePcepSessPeerDeadTimer Unsigned32, pcePcepSessPeerDeadTimer Unsigned32,
pcePcepSessKAHoldTimeRem Unsigned32, pcePcepSessKAHoldTimeRem Unsigned32,
pcePcepSessOverloaded TruthValue, pcePcepSessOverloaded TruthValue,
pcePcepSessOverloadTime Unsigned32, pcePcepSessOverloadTime Unsigned32,
pcePcepSessPeerOverloaded TruthValue, pcePcepSessPeerOverloaded TruthValue,
pcePcepSessPeerOverloadTime Unsigned32, pcePcepSessPeerOverloadTime Unsigned32,
pcePcepSessDiscontinuityTime TimeStamp, pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime Unsigned32, pcePcepSessAvgRspTime Unsigned32,
pcePcepSessLWMRspTime Unsigned32, pcePcepSessLWMRspTime Unsigned32,
pcePcepSessHWMRspTime Unsigned32, pcePcepSessHWMRspTime Unsigned32,
pcePcepSessNumPCReqSent Counter32, pcePcepSessNumPCReqSent Counter32,
pcePcepSessNumPCReqRcvd Counter32, pcePcepSessNumPCReqRcvd Counter32,
pcePcepSessNumPCRepSent Counter32, pcePcepSessNumPCRepSent Counter32,
pcePcepSessNumPCRepRcvd Counter32, pcePcepSessNumPCRepRcvd Counter32,
pcePcepSessNumPCErrSent Counter32, pcePcepSessNumPCErrSent Counter32,
pcePcepSessNumPCErrRcvd Counter32, pcePcepSessNumPCErrRcvd Counter32,
pcePcepSessNumPCNtfSent Counter32, pcePcepSessNumPCNtfSent Counter32,
pcePcepSessNumPCNtfRcvd Counter32, pcePcepSessNumPCNtfRcvd Counter32,
pcePcepSessNumKeepaliveSent Counter32, pcePcepSessNumKeepaliveSent Counter32,
pcePcepSessNumKeepaliveRcvd Counter32, pcePcepSessNumKeepaliveRcvd Counter32,
pcePcepSessNumUnknownRcvd Counter32, pcePcepSessNumUnknownRcvd Counter32,
pcePcepSessNumCorruptRcvd Counter32, pcePcepSessNumCorruptRcvd Counter32,
pcePcepSessNumReqSent Counter32, pcePcepSessNumReqSent Counter32,
pcePcepSessNumSvecSent Counter32, pcePcepSessNumSvecSent Counter32,
pcePcepSessNumSvecReqSent Counter32, pcePcepSessNumSvecReqSent Counter32,
pcePcepSessNumReqSentPendRep Counter32, pcePcepSessNumReqSentPendRep Counter32,
pcePcepSessNumReqSentEroRcvd Counter32, pcePcepSessNumReqSentEroRcvd Counter32,
pcePcepSessNumReqSentNoPathRcvd Counter32, pcePcepSessNumReqSentNoPathRcvd Counter32,
pcePcepSessNumReqSentCancelRcvd Counter32, pcePcepSessNumReqSentCancelRcvd Counter32,
pcePcepSessNumReqSentErrorRcvd Counter32, pcePcepSessNumReqSentErrorRcvd Counter32,
pcePcepSessNumReqSentTimeout Counter32, pcePcepSessNumReqSentTimeout Counter32,
pcePcepSessNumReqSentCancelSent Counter32, pcePcepSessNumReqSentCancelSent Counter32,
pcePcepSessNumReqRcvd Counter32, pcePcepSessNumReqRcvd Counter32,
pcePcepSessNumSvecRcvd Counter32, pcePcepSessNumSvecRcvd Counter32,
pcePcepSessNumSvecReqRcvd Counter32, pcePcepSessNumSvecReqRcvd Counter32,
pcePcepSessNumReqRcvdPendRep Counter32, pcePcepSessNumReqRcvdPendRep Counter32,
pcePcepSessNumReqRcvdEroSent Counter32, pcePcepSessNumReqRcvdEroSent Counter32,
pcePcepSessNumReqRcvdNoPathSent Counter32, pcePcepSessNumReqRcvdNoPathSent Counter32,
pcePcepSessNumReqRcvdCancelSent Counter32, pcePcepSessNumReqRcvdCancelSent Counter32,
pcePcepSessNumReqRcvdErrorSent Counter32, pcePcepSessNumReqRcvdErrorSent Counter32,
pcePcepSessNumReqRcvdCancelRcvd Counter32, pcePcepSessNumReqRcvdCancelRcvd Counter32,
pcePcepSessNumRepRcvdUnknown Counter32, pcePcepSessNumRepRcvdUnknown Counter32,
pcePcepSessNumReqRcvdUnknown Counter32 pcePcepSessNumReqRcvdUnknown Counter32
} }
pcePcepSessInitiator OBJECT-TYPE pcePcepSessInitiator OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
local(1), local(1),
remote(2) remote(2)
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The initiator of the session, that is, whether the TCP "The initiator of the session, that is, whether the TCP
connection was initiated by the local PCEP entity or the connection was initiated by the local PCEP entity or the
peer. peer.
There is a window during session initialization where two There is a window during session initialization where two
sessions can exist between a pair of PCEP speakers, each sessions can exist between a pair of PCEP speakers, each
initiated by one of the speakers. One of these sessions is initiated by one of the speakers. One of these sessions is
always discarded before it leaves OpenWait state. However, always discarded before it leaves OpenWait state. However,
before it is discarded, two sessions to the given peer before it is discarded, two sessions to the given peer
appear transiently in this MIB module. The sessions are appear transiently in this MIB module. The sessions are
distinguished by who initiated them, and so this field is an distinguished by who initiated them, and so this field is an
index for the pcePcepSessTable." index for the pcePcepSessTable."
::= { pcePcepSessEntry 1 } ::= { pcePcepSessEntry 1 }
pcePcepSessStateLastChange OBJECT-TYPE pcePcepSessStateLastChange OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at the time this session entered its "The value of sysUpTime at the time this session entered its
current state as denoted by the pcePcepSessState object." current state as denoted by the pcePcepSessState object."
::= { pcePcepSessEntry 2 } ::= { pcePcepSessEntry 2 }
pcePcepSessState OBJECT-TYPE pcePcepSessState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
tcpPending(1), tcpPending(1),
openWait(2), openWait(2),
keepWait(3), keepWait(3),
sessionUp(4) sessionUp(4)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current state of the session. "The current state of the session.
The set of possible states excludes the idle state since The set of possible states excludes the idle state since
entries do not exist in this table in the idle state." entries do not exist in this table in the idle state."
::= { pcePcepSessEntry 3 } ::= { pcePcepSessEntry 3 }
pcePcepSessConnectRetry OBJECT-TYPE pcePcepSessConnectRetry OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times that the local PCEP entity has "The number of times that the local PCEP entity has
attempted to establish a TCP connection for this session attempted to establish a TCP connection for this session
without success. The PCEP entity gives up when this without success. The PCEP entity gives up when this
reaches pcePcepEntityConnectMaxRetry." reaches pcePcepEntityConnectMaxRetry."
::= { pcePcepSessEntry 4 } ::= { pcePcepSessEntry 4 }
pcePcepSessLocalID OBJECT-TYPE pcePcepSessLocalID OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the PCEP session ID used by the local PCEP "The value of the PCEP session ID used by the local PCEP
entity in the Open message for this session. entity in the Open message for this session.
If pcePcepSessState is tcpPending then this is the session If pcePcepSessState is tcpPending then this is the session
ID that will be used in the Open message. Otherwise, this ID that will be used in the Open message. Otherwise, this
is the session ID that was sent in the Open message." is the session ID that was sent in the Open message."
::= { pcePcepSessEntry 5 } ::= { pcePcepSessEntry 5 }
pcePcepSessRemoteID OBJECT-TYPE pcePcepSessRemoteID OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the PCEP session ID used by the peer in its "The value of the PCEP session ID used by the peer in its
Open message for this session. Open message for this session.
If pcePcepSessState is tcpPending or openWait then this If pcePcepSessState is tcpPending or openWait then this
field is not used and MUST be set to zero." field is not used and MUST be set to zero."
::= { pcePcepSessEntry 6 } ::= { pcePcepSessEntry 6 }
pcePcepSessKeepaliveTimer OBJECT-TYPE pcePcepSessKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The agreed maximum interval at which the local PCEP entity "The agreed maximum interval at which the local PCEP entity
transmits PCEP messages on this PCEP session. Zero means transmits PCEP messages on this PCEP session. Zero means
that the local PCEP entity never sends Keepalives on this that the local PCEP entity never sends Keepalives on this
session. session.
This field is used if and only if pcePcepSessState is This field is used if and only if pcePcepSessState is
sessionUp. Otherwise, it is not used and MUST be set to sessionUp. Otherwise, it is not used and MUST be set to
zero." zero."
::= { pcePcepSessEntry 7 } ::= { pcePcepSessEntry 7 }
pcePcepSessPeerKeepaliveTimer OBJECT-TYPE pcePcepSessPeerKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The agreed maximum interval at which the peer transmits PCEP "The agreed maximum interval at which the peer transmits PCEP
messages on this PCEP session. Zero means that the peer messages on this PCEP session. Zero means that the peer
never sends Keepalives on this session. never sends Keepalives on this session.
This field is used if and only if pcePcepSessState is This field is used if and only if pcePcepSessState is
sessionUp. Otherwise, it is not used and MUST be set to sessionUp. Otherwise, it is not used and MUST be set to
zero." zero."
::= { pcePcepSessEntry 8 } ::= { pcePcepSessEntry 8 }
pcePcepSessDeadTimer OBJECT-TYPE pcePcepSessDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The DeadTimer interval for this PCEP session." "The DeadTimer interval for this PCEP session."
::= { pcePcepSessEntry 9 } ::= { pcePcepSessEntry 9 }
pcePcepSessPeerDeadTimer OBJECT-TYPE pcePcepSessPeerDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The peer's DeadTimer interval for this PCEP session. "The peer's DeadTimer interval for this PCEP session.
If pcePcepSessState is tcpPending or openWait then this If pcePcepSessState is tcpPending or openWait then this
field is not used and MUST be set to zero." field is not used and MUST be set to zero."
::= { pcePcepSessEntry 10 } ::= { pcePcepSessEntry 10 }
pcePcepSessKAHoldTimeRem OBJECT-TYPE pcePcepSessKAHoldTimeRem OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The keep alive hold time remaining for this session. "The keep alive hold time remaining for this session.
If pcePcepSessState is tcpPending or openWait then this If pcePcepSessState is tcpPending or openWait then this
field is not used and MUST be set to zero." field is not used and MUST be set to zero."
::= { pcePcepSessEntry 11 } ::= { pcePcepSessEntry 11 }
pcePcepSessOverloaded OBJECT-TYPE pcePcepSessOverloaded OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If the local PCEP entity has informed the peer that it is "If the local PCEP entity has informed the peer that it is
currently overloaded, then this is set to true. Otherwise, currently overloaded, then this is set to true. Otherwise,
it is set to false." it is set to false."
::= { pcePcepSessEntry 12 } ::= { pcePcepSessEntry 12 }
pcePcepSessOverloadTime OBJECT-TYPE pcePcepSessOverloadTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval of time that is remaining until the local PCEP "The interval of time that is remaining until the local PCEP
entity will cease to be overloaded on this session. entity will cease to be overloaded on this session.
This field is only used if pcePcepSessOverloaded is set to This field is only used if pcePcepSessOverloaded is set to
true. Otherwise, it is not used and MUST be set to zero." true. Otherwise, it is not used and MUST be set to zero."
::= { pcePcepSessEntry 13 } ::= { pcePcepSessEntry 13 }
pcePcepSessPeerOverloaded OBJECT-TYPE pcePcepSessPeerOverloaded OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If the peer has informed the local PCEP entity that it is "If the peer has informed the local PCEP entity that it is
currently overloaded, then this is set to true. Otherwise, currently overloaded, then this is set to true. Otherwise,
it is set to false." it is set to false."
::= { pcePcepSessEntry 14 } ::= { pcePcepSessEntry 14 }
pcePcepSessPeerOverloadTime OBJECT-TYPE pcePcepSessPeerOverloadTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval of time that is remaining until the peer will "The interval of time that is remaining until the peer will
cease to be overloaded. If it is not known how long the cease to be overloaded. If it is not known how long the
peer will stay in overloaded state, this field is set to peer will stay in overloaded state, this field is set to
zero. zero.
This field is only used if pcePcepSessPeerOverloaded is set This field is only used if pcePcepSessPeerOverloaded is set
to true. Otherwise, it is not used and MUST be set to to true. Otherwise, it is not used and MUST be set to
zero." zero."
::= { pcePcepSessEntry 15 } ::= { pcePcepSessEntry 15 }
pcePcepSessDiscontinuityTime OBJECT-TYPE pcePcepSessDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at the time that the statistics in "The value of sysUpTime at the time that the statistics in
this row were last reset." this row were last reset."
::= { pcePcepSessEntry 16 } ::= { pcePcepSessEntry 16 }
pcePcepSessAvgRspTime OBJECT-TYPE pcePcepSessAvgRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The average response time for this peer on this session. "The average response time for this peer on this session.
If an average response time has not been calculated for this If an average response time has not been calculated for this
peer then this object has the value zero." peer then this object has the value zero."
::= { pcePcepSessEntry 17 } ::= { pcePcepSessEntry 17 }
pcePcepSessLWMRspTime OBJECT-TYPE pcePcepSessLWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The smallest (low-water mark) response time seen from this "The smallest (low-water mark) response time seen from this
peer on this session. peer on this session.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero." object has the value zero."
::= { pcePcepSessEntry 18 } ::= { pcePcepSessEntry 18 }
pcePcepSessHWMRspTime OBJECT-TYPE pcePcepSessHWMRspTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The greatest (high-water mark) response time seen from this "The greatest (high-water mark) response time seen from this
peer on this session. peer on this session.
If no responses have been received from this peer then this If no responses have been received from this peer then this
object has the value zero." object has the value zero."
::= { pcePcepSessEntry 19 } ::= { pcePcepSessEntry 19 }
pcePcepSessNumPCReqSent OBJECT-TYPE pcePcepSessNumPCReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages sent on this session." "The number of PCReq messages sent on this session."
::= { pcePcepSessEntry 20 } ::= { pcePcepSessEntry 20 }
pcePcepSessNumPCReqRcvd OBJECT-TYPE pcePcepSessNumPCReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCReq messages received on this session." "The number of PCReq messages received on this session."
::= { pcePcepSessEntry 21 } ::= { pcePcepSessEntry 21 }
pcePcepSessNumPCRepSent OBJECT-TYPE pcePcepSessNumPCRepSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages sent on this session." "The number of PCRep messages sent on this session."
::= { pcePcepSessEntry 22 } ::= { pcePcepSessEntry 22 }
pcePcepSessNumPCRepRcvd OBJECT-TYPE pcePcepSessNumPCRepRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCRep messages received on this session." "The number of PCRep messages received on this session."
::= { pcePcepSessEntry 23 } ::= { pcePcepSessEntry 23 }
pcePcepSessNumPCErrSent OBJECT-TYPE pcePcepSessNumPCErrSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages sent on this session." "The number of PCErr messages sent on this session."
::= { pcePcepSessEntry 24 } ::= { pcePcepSessEntry 24 }
pcePcepSessNumPCErrRcvd OBJECT-TYPE pcePcepSessNumPCErrRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCErr messages received on this session." "The number of PCErr messages received on this session."
::= { pcePcepSessEntry 25 } ::= { pcePcepSessEntry 25 }
pcePcepSessNumPCNtfSent OBJECT-TYPE pcePcepSessNumPCNtfSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages sent on this session." "The number of PCNtf messages sent on this session."
::= { pcePcepSessEntry 26 } ::= { pcePcepSessEntry 26 }
pcePcepSessNumPCNtfRcvd OBJECT-TYPE pcePcepSessNumPCNtfRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of PCNtf messages received on this session." "The number of PCNtf messages received on this session."
::= { pcePcepSessEntry 27 } ::= { pcePcepSessEntry 27 }
pcePcepSessNumKeepaliveSent OBJECT-TYPE pcePcepSessNumKeepaliveSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages sent on this session." "The number of Keepalive messages sent on this session."
::= { pcePcepSessEntry 28 } ::= { pcePcepSessEntry 28 }
pcePcepSessNumKeepaliveRcvd OBJECT-TYPE pcePcepSessNumKeepaliveRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Keepalive messages received on this session." "The number of Keepalive messages received on this session."
::= { pcePcepSessEntry 29 } ::= { pcePcepSessEntry 29 }
pcePcepSessNumUnknownRcvd OBJECT-TYPE pcePcepSessNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown messages received on this session." "The number of unknown messages received on this session."
::= { pcePcepSessEntry 30 } ::= { pcePcepSessEntry 30 }
pcePcepSessNumCorruptRcvd OBJECT-TYPE pcePcepSessNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of corrupted PCEP message received on this "The number of corrupted PCEP message received on this
session." session."
::= { pcePcepSessEntry 31 } ::= { pcePcepSessEntry 31 }
pcePcepSessNumReqSent OBJECT-TYPE pcePcepSessNumReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session. A request "The number of requests sent on this session. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqSent because This might be greater than pcePcepSessNumPCReqSent because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepSessEntry 32 } ::= { pcePcepSessEntry 32 }
pcePcepSessNumSvecSent OBJECT-TYPE pcePcepSessNumSvecSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects sent on this session in PCReq "The number of SVEC objects sent on this session in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepSessEntry 33 } ::= { pcePcepSessEntry 33 }
pcePcepSessNumSvecReqSent OBJECT-TYPE pcePcepSessNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that appeared in "The number of requests sent on this session that appeared in
one or more SVEC objects." one or more SVEC objects."
::= { pcePcepSessEntry 34 } ::= { pcePcepSessEntry 34 }
pcePcepSessNumReqSentPendRep OBJECT-TYPE pcePcepSessNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been sent on this session "The number of requests that have been sent on this session
for which a response is still pending." for which a response is still pending."
::= { pcePcepSessEntry 35 } ::= { pcePcepSessEntry 35 }
pcePcepSessNumReqSentEroRcvd OBJECT-TYPE pcePcepSessNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of successful responses received on this session. "The number of successful responses received on this session.
A response corresponds 1:1 with an RP object in a PCRep A response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an message. A successful response is a response for which an
ERO was successfully computed." ERO was successfully computed."
::= { pcePcepSessEntry 36 } ::= { pcePcepSessEntry 36 }
pcePcepSessNumReqSentNoPathRcvd OBJECT-TYPE pcePcepSessNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unsuccessful responses received on this "The number of unsuccessful responses received on this
session. A response corresponds 1:1 with an RP object in a session. A response corresponds 1:1 with an RP object in a
PCRep message. An unsuccessful response is a response with PCRep message. An unsuccessful response is a response with
a NO-PATH object." a NO-PATH object."
::= { pcePcepSessEntry 37 } ::= { pcePcepSessEntry 37 }
pcePcepSessNumReqSentCancelRcvd OBJECT-TYPE pcePcepSessNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were "The number of requests sent on this session that were
cancelled by the peer with a PCNtf message. cancelled by the peer with a PCNtf message.
This might be different than pcePcepSessNumPCNtfRcvd because This might be different than pcePcepSessNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 38 } ::= { pcePcepSessEntry 38 }
pcePcepSessNumReqSentErrorRcvd OBJECT-TYPE pcePcepSessNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were "The number of requests sent on this session that were
rejected by the peer with a PCErr message. rejected by the peer with a PCErr message.
This might be different than pcePcepSessNumPCErrRcvd because This might be different than pcePcepSessNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 39 } ::= { pcePcepSessEntry 39 }
pcePcepSessNumReqSentTimeout OBJECT-TYPE pcePcepSessNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that have been "The number of requests sent on this session that have been
sent to a peer and have been abandoned because the peer has sent to a peer and have been abandoned because the peer has
taken too long to respond to them." taken too long to respond to them."
::= { pcePcepSessEntry 40 } ::= { pcePcepSessEntry 40 }
pcePcepSessNumReqSentCancelSent OBJECT-TYPE pcePcepSessNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests sent on this session that were sent "The number of requests sent on this session that were sent
to the peer and explicitly canceled by the local PCEP to the peer and explicitly canceled by the local PCEP
entity sending a PCNtf." entity sending a PCNtf."
::= { pcePcepSessEntry 41 } ::= { pcePcepSessEntry 41 }
pcePcepSessNumReqRcvd OBJECT-TYPE pcePcepSessNumReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session. A request "The number of requests received on this session. A request
corresponds 1:1 with an RP object in a PCReq message. corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqRcvd because This might be greater than pcePcepSessNumPCReqRcvd because
multiple requests can be batched into a single PCReq multiple requests can be batched into a single PCReq
message." message."
::= { pcePcepSessEntry 42 } ::= { pcePcepSessEntry 42 }
pcePcepSessNumSvecRcvd OBJECT-TYPE pcePcepSessNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of SVEC objects received on this session in PCReq "The number of SVEC objects received on this session in PCReq
messages. An SVEC object represents a set of synchronized messages. An SVEC object represents a set of synchronized
requests." requests."
::= { pcePcepSessEntry 43 } ::= { pcePcepSessEntry 43 }
pcePcepSessNumSvecReqRcvd OBJECT-TYPE pcePcepSessNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that "The number of requests received on this session that
appeared in one or more SVEC objects." appeared in one or more SVEC objects."
::= { pcePcepSessEntry 44 } ::= { pcePcepSessEntry 44 }
pcePcepSessNumReqRcvdPendRep OBJECT-TYPE pcePcepSessNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that have been received on this "The number of requests that have been received on this
session for which a response is still pending." session for which a response is still pending."
::= { pcePcepSessEntry 45 } ::= { pcePcepSessEntry 45 }
pcePcepSessNumReqRcvdEroSent OBJECT-TYPE pcePcepSessNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of successful responses sent on this session. A "The number of successful responses sent on this session. A
response corresponds 1:1 with an RP object in a PCRep response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an message. A successful response is a response for which an
ERO was successfully computed." ERO was successfully computed."
::= { pcePcepSessEntry 46 } ::= { pcePcepSessEntry 46 }
pcePcepSessNumReqRcvdNoPathSent OBJECT-TYPE pcePcepSessNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unsuccessful responses sent on this session. "The number of unsuccessful responses sent on this session.
A response corresponds 1:1 with an RP object in a PCRep A response corresponds 1:1 with an RP object in a PCRep
message. An unsuccessful response is a response with a message. An unsuccessful response is a response with a
NO-PATH object." NO-PATH object."
::= { pcePcepSessEntry 47 } ::= { pcePcepSessEntry 47 }
pcePcepSessNumReqRcvdCancelSent OBJECT-TYPE pcePcepSessNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that were "The number of requests received on this session that were
cancelled by the local PCEP entity sending a PCNtf message. cancelled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepSessNumPCNtfSent because This might be different than pcePcepSessNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests." single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 48 } ::= { pcePcepSessEntry 48 }
pcePcepSessNumReqRcvdErrorSent OBJECT-TYPE pcePcepSessNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests received on this session that were "The number of requests received on this session that were
rejected by the local PCEP entity sending a PCErr message. rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepSessNumPCErrSent because This might be different than pcePcepSessNumPCErrSent because
not all PCErr messages are used to reject requests, and a not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests." single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 49 } ::= { pcePcepSessEntry 49 }
pcePcepSessNumReqRcvdCancelRcvd OBJECT-TYPE pcePcepSessNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of requests that were received on this session "The number of requests that were received on this session
and explicitly canceled by the peer sending a PCNtf." and explicitly canceled by the peer sending a PCNtf."
::= { pcePcepSessEntry 50 } ::= { pcePcepSessEntry 50 }
pcePcepSessNumRepRcvdUnknown OBJECT-TYPE pcePcepSessNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of responses to unknown requests received on this "The number of responses to unknown requests received on this
session. A response to an unknown request is a response session. A response to an unknown request is a response
whose RP object does not contain the request ID of any whose RP object does not contain the request ID of any
request that is currently outstanding on the session." request that is currently outstanding on the session."
::= { pcePcepSessEntry 51 } ::= { pcePcepSessEntry 51 }
pcePcepSessNumReqRcvdUnknown OBJECT-TYPE pcePcepSessNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unknown requests that have been received on "The number of unknown requests that have been received on
this session. An unknown request is a request whose RP this session. An unknown request is a request whose RP
object contains a request ID of zero." object contains a request ID of zero."
::= { pcePcepSessEntry 52 } ::= { pcePcepSessEntry 52 }
--- ---
--- Notifications Configuration --- Notifications Configuration
--- ---
pcePcepNotificationsMaxRate OBJECT-TYPE pcePcepNotificationsMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable indicates the maximum number of "This variable indicates the maximum number of
notifications issued per second. If events occur notifications issued per second. If events occur
more rapidly, the implementation may simply fail to more rapidly, the implementation may simply fail to
emit these notifications during that period, or may emit these notifications during that period, or may
queue them until an appropriate time. A value of 0 queue them until an appropriate time. A value of 0
means no notifications are emitted and all should be means no notifications are emitted and all should be
discarded (that is, not queued)." discarded (that is, not queued)."
::= { pcePcepObjects 4 } ::= { pcePcepObjects 4 }
--- ---
--- Notifications --- Notifications
--- ---
pcePcepSessUp NOTIFICATION-TYPE pcePcepSessUp NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessState, pcePcepSessState,
pcePcepSessStateLastChange pcePcepSessStateLastChange
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the value of "This notification is sent when the value of
'pcePcepSessState' enters the 'sessionUp' state." 'pcePcepSessState' enters the 'sessionUp' state."
::= { pcePcepNotifications 1 } ::= { pcePcepNotifications 1 }
pcePcepSessDown NOTIFICATION-TYPE pcePcepSessDown NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessState, pcePcepSessState,
pcePcepSessStateLastChange pcePcepSessStateLastChange
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the value of "This notification is sent when the value of
'pcePcepSessState' leaves the 'sessionUp' state." 'pcePcepSessState' leaves the 'sessionUp' state."
::= { pcePcepNotifications 2 } ::= { pcePcepNotifications 2 }
pcePcepSessLocalOverload NOTIFICATION-TYPE pcePcepSessLocalOverload NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessOverloaded, pcePcepSessOverloaded,
pcePcepSessOverloadTime pcePcepSessOverloadTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the local PCEP entity enters "This notification is sent when the local PCEP entity enters
overload state for a peer." overload state for a peer."
::= { pcePcepNotifications 3 } ::= { pcePcepNotifications 3 }
pcePcepSessLocalOverloadClear NOTIFICATION-TYPE pcePcepSessLocalOverloadClear NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessOverloaded pcePcepSessOverloaded
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when the local PCEP entity leaves "This notification is sent when the local PCEP entity leaves
overload state for a peer." overload state for a peer."
::= { pcePcepNotifications 4 } ::= { pcePcepNotifications 4 }
pcePcepSessPeerOverload NOTIFICATION-TYPE pcePcepSessPeerOverload NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessPeerOverloaded, pcePcepSessPeerOverloaded,
pcePcepSessPeerOverloadTime pcePcepSessPeerOverloadTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when a peer enters overload "This notification is sent when a peer enters overload
state." state."
::= { pcePcepNotifications 5 } ::= { pcePcepNotifications 5 }
pcePcepSessPeerOverloadClear NOTIFICATION-TYPE pcePcepSessPeerOverloadClear NOTIFICATION-TYPE
OBJECTS { OBJECTS {
pcePcepSessPeerOverloaded pcePcepSessPeerOverloaded
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification is sent when a peer leaves overload "This notification is sent when a peer leaves overload
state." state."
::= { pcePcepNotifications 6 } ::= { pcePcepNotifications 6 }
-- --
-- Module Conformance Statement -- Module Conformance Statement
-- --
pcePcepCompliances pcePcepCompliances
OBJECT IDENTIFIER ::= { pcePcepConformance 1 } OBJECT IDENTIFIER ::= { pcePcepConformance 1 }
pcePcepGroups pcePcepGroups
OBJECT IDENTIFIER ::= { pcePcepConformance 2 } OBJECT IDENTIFIER ::= { pcePcepConformance 2 }
-- --
-- Read-Only Compliance -- Read-Only Compliance
-- --
pcePcepModuleReadOnlyCompliance MODULE-COMPLIANCE pcePcepModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Module is implemented with support for read-only. In "The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing other words, only monitoring is available by implementing
this MODULE-COMPLIANCE." this MODULE-COMPLIANCE."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
pcePcepGeneralGroup, pcePcepGeneralGroup,
pcePcepNotificationsGroup pcePcepNotificationsGroup
} }
OBJECT pcePcepEntityAddrType OBJECT pcePcepEntityAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required." is required."
OBJECT pcePcepPeerAddrType OBJECT pcePcepPeerAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required." is required."
::= { pcePcepCompliances 1 } ::= { pcePcepCompliances 1 }
-- units of conformance -- units of conformance
pcePcepGeneralGroup OBJECT-GROUP pcePcepGeneralGroup OBJECT-GROUP
OBJECTS { pcePcepEntityAdminStatus, OBJECTS { pcePcepEntityAdminStatus,
pcePcepEntityOperStatus, pcePcepEntityOperStatus,
pcePcepEntityAddrType, pcePcepEntityAddrType,
pcePcepEntityAddr, pcePcepEntityAddr,
pcePcepEntityConnectTimer, pcePcepEntityConnectTimer,
pcePcepEntityConnectMaxRetry, pcePcepEntityConnectMaxRetry,
pcePcepEntityInitBackoffTimer, pcePcepEntityInitBackoffTimer,
pcePcepEntityMaxBackoffTimer, pcePcepEntityMaxBackoffTimer,
pcePcepEntityOpenWaitTimer, pcePcepEntityOpenWaitTimer,
pcePcepEntityKeepWaitTimer, pcePcepEntityKeepWaitTimer,
pcePcepEntityKeepAliveTimer, pcePcepEntityKeepAliveTimer,
pcePcepEntityDeadTimer, pcePcepEntityDeadTimer,
pcePcepEntityAllowNegotiation, pcePcepEntityAllowNegotiation,
pcePcepEntityMaxKeepAliveTimer, pcePcepEntityMaxKeepAliveTimer,
pcePcepEntityMaxDeadTimer, pcePcepEntityMaxDeadTimer,
pcePcepEntityMinKeepAliveTimer, pcePcepEntityMinKeepAliveTimer,
pcePcepEntityMinDeadTimer, pcePcepEntityMinDeadTimer,
pcePcepEntitySyncTimer, pcePcepEntitySyncTimer,
pcePcepEntityRequestTimer, pcePcepEntityRequestTimer,
pcePcepEntityMaxSessions, pcePcepEntityMaxSessions,
pcePcepEntityMaxUnknownReqs, pcePcepEntityMaxUnknownReqs,
pcePcepEntityMaxUnknownMsgs, pcePcepEntityMaxUnknownMsgs,
pcePcepPeerRole, pcePcepPeerRole,
pcePcepPeerDiscontinuityTime, pcePcepPeerDiscontinuityTime,
pcePcepPeerInitiateSession, pcePcepPeerInitiateSession,
pcePcepPeerSessionExists, pcePcepPeerSessionExists,
pcePcepPeerNumSessSetupOK, pcePcepPeerNumSessSetupOK,
pcePcepPeerNumSessSetupFail, pcePcepPeerNumSessSetupFail,
pcePcepPeerSessionUpTime, pcePcepPeerSessionUpTime,
pcePcepPeerSessionFailTime, pcePcepPeerSessionFailTime,
pcePcepPeerSessionFailUpTime, pcePcepPeerSessionFailUpTime,
pcePcepPeerAvgRspTime, pcePcepPeerAvgRspTime,
pcePcepPeerLWMRspTime, pcePcepPeerLWMRspTime,
pcePcepPeerHWMRspTime, pcePcepPeerHWMRspTime,
pcePcepPeerNumPCReqSent, pcePcepPeerNumPCReqSent,
pcePcepPeerNumPCReqRcvd, pcePcepPeerNumPCReqRcvd,
pcePcepPeerNumPCRepSent, pcePcepPeerNumPCRepSent,
pcePcepPeerNumPCRepRcvd, pcePcepPeerNumPCRepRcvd,
pcePcepPeerNumPCErrSent, pcePcepPeerNumPCErrSent,
pcePcepPeerNumPCErrRcvd, pcePcepPeerNumPCErrRcvd,
pcePcepPeerNumPCNtfSent, pcePcepPeerNumPCNtfSent,
pcePcepPeerNumPCNtfRcvd, pcePcepPeerNumPCNtfRcvd,
pcePcepPeerNumKeepaliveSent, pcePcepPeerNumKeepaliveSent,
pcePcepPeerNumKeepaliveRcvd, pcePcepPeerNumKeepaliveRcvd,
pcePcepPeerNumUnknownRcvd, pcePcepPeerNumUnknownRcvd,
pcePcepPeerNumCorruptRcvd, pcePcepPeerNumCorruptRcvd,
pcePcepPeerNumReqSent, pcePcepPeerNumReqSent,
pcePcepPeerNumSvecSent, pcePcepPeerNumSvecSent,
pcePcepPeerNumSvecReqSent, pcePcepPeerNumSvecReqSent,
pcePcepPeerNumReqSentPendRep, pcePcepPeerNumReqSentPendRep,
pcePcepPeerNumReqSentEroRcvd, pcePcepPeerNumReqSentEroRcvd,
pcePcepPeerNumReqSentNoPathRcvd, pcePcepPeerNumReqSentNoPathRcvd,
pcePcepPeerNumReqSentCancelRcvd, pcePcepPeerNumReqSentCancelRcvd,
pcePcepPeerNumReqSentErrorRcvd, pcePcepPeerNumReqSentErrorRcvd,
pcePcepPeerNumReqSentTimeout, pcePcepPeerNumReqSentTimeout,
pcePcepPeerNumReqSentCancelSent, pcePcepPeerNumReqSentCancelSent,
pcePcepPeerNumReqSentClosed, pcePcepPeerNumReqSentClosed,
pcePcepPeerNumReqRcvd, pcePcepPeerNumReqRcvd,
pcePcepPeerNumSvecRcvd, pcePcepPeerNumSvecRcvd,
pcePcepPeerNumSvecReqRcvd, pcePcepPeerNumSvecReqRcvd,
pcePcepPeerNumReqRcvdPendRep, pcePcepPeerNumReqRcvdPendRep,
pcePcepPeerNumReqRcvdEroSent, pcePcepPeerNumReqRcvdEroSent,
pcePcepPeerNumReqRcvdNoPathSent, pcePcepPeerNumReqRcvdNoPathSent,
pcePcepPeerNumReqRcvdCancelSent, pcePcepPeerNumReqRcvdCancelSent,
pcePcepPeerNumReqRcvdErrorSent, pcePcepPeerNumReqRcvdErrorSent,
pcePcepPeerNumReqRcvdCancelRcvd, pcePcepPeerNumReqRcvdCancelRcvd,
pcePcepPeerNumReqRcvdClosed, pcePcepPeerNumReqRcvdClosed,
pcePcepPeerNumRepRcvdUnknown, pcePcepPeerNumRepRcvdUnknown,
pcePcepPeerNumReqRcvdUnknown, pcePcepPeerNumReqRcvdUnknown,
pcePcepSessStateLastChange, pcePcepSessStateLastChange,
pcePcepSessState, pcePcepSessState,
pcePcepSessConnectRetry, pcePcepSessConnectRetry,
pcePcepSessLocalID, pcePcepSessLocalID,
pcePcepSessRemoteID, pcePcepSessRemoteID,
pcePcepSessKeepaliveTimer, pcePcepSessKeepaliveTimer,
pcePcepSessPeerKeepaliveTimer, pcePcepSessPeerKeepaliveTimer,
pcePcepSessDeadTimer, pcePcepSessDeadTimer,
pcePcepSessPeerDeadTimer, pcePcepSessPeerDeadTimer,
pcePcepSessKAHoldTimeRem, pcePcepSessKAHoldTimeRem,
pcePcepSessOverloaded, pcePcepSessOverloaded,
pcePcepSessOverloadTime, pcePcepSessOverloadTime,
pcePcepSessPeerOverloaded, pcePcepSessPeerOverloaded,
pcePcepSessPeerOverloadTime, pcePcepSessPeerOverloadTime,
pcePcepSessDiscontinuityTime, pcePcepSessDiscontinuityTime,
pcePcepSessAvgRspTime, pcePcepSessAvgRspTime,
pcePcepSessLWMRspTime, pcePcepSessLWMRspTime,
pcePcepSessHWMRspTime, pcePcepSessHWMRspTime,
pcePcepSessNumPCReqSent, pcePcepSessNumPCReqSent,
pcePcepSessNumPCReqRcvd, pcePcepSessNumPCReqRcvd,
pcePcepSessNumPCRepSent, pcePcepSessNumPCRepSent,
pcePcepSessNumPCRepRcvd, pcePcepSessNumPCRepRcvd,
pcePcepSessNumPCErrSent, pcePcepSessNumPCErrSent,
pcePcepSessNumPCErrRcvd, pcePcepSessNumPCErrRcvd,
pcePcepSessNumPCNtfSent, pcePcepSessNumPCNtfSent,
pcePcepSessNumPCNtfRcvd, pcePcepSessNumPCNtfRcvd,
pcePcepSessNumKeepaliveSent, pcePcepSessNumKeepaliveSent,
pcePcepSessNumKeepaliveRcvd, pcePcepSessNumKeepaliveRcvd,
pcePcepSessNumUnknownRcvd, pcePcepSessNumUnknownRcvd,
pcePcepSessNumCorruptRcvd, pcePcepSessNumCorruptRcvd,
pcePcepSessNumReqSent, pcePcepSessNumReqSent,
pcePcepSessNumSvecSent, pcePcepSessNumSvecSent,
pcePcepSessNumSvecReqSent, pcePcepSessNumSvecReqSent,
pcePcepSessNumReqSentPendRep, pcePcepSessNumReqSentPendRep,
pcePcepSessNumReqSentEroRcvd, pcePcepSessNumReqSentEroRcvd,
pcePcepSessNumReqSentNoPathRcvd, pcePcepSessNumReqSentNoPathRcvd,
pcePcepSessNumReqSentCancelRcvd, pcePcepSessNumReqSentCancelRcvd,
pcePcepSessNumReqSentErrorRcvd, pcePcepSessNumReqSentErrorRcvd,
pcePcepSessNumReqSentTimeout, pcePcepSessNumReqSentTimeout,
pcePcepSessNumReqSentCancelSent, pcePcepSessNumReqSentCancelSent,
pcePcepSessNumReqRcvd, pcePcepSessNumReqRcvd,
pcePcepSessNumSvecRcvd, pcePcepSessNumSvecRcvd,
pcePcepSessNumSvecReqRcvd, pcePcepSessNumSvecReqRcvd,
pcePcepSessNumReqRcvdPendRep, pcePcepSessNumReqRcvdPendRep,
pcePcepSessNumReqRcvdEroSent, pcePcepSessNumReqRcvdEroSent,
pcePcepSessNumReqRcvdNoPathSent, pcePcepSessNumReqRcvdNoPathSent,
pcePcepSessNumReqRcvdCancelSent, pcePcepSessNumReqRcvdCancelSent,
pcePcepSessNumReqRcvdErrorSent, pcePcepSessNumReqRcvdErrorSent,
pcePcepSessNumReqRcvdCancelRcvd, pcePcepSessNumReqRcvdCancelRcvd,
pcePcepSessNumRepRcvdUnknown, pcePcepSessNumRepRcvdUnknown,
pcePcepSessNumReqRcvdUnknown, pcePcepSessNumReqRcvdUnknown,
pcePcepNotificationsMaxRate pcePcepNotificationsMaxRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects that apply to all PCEP MIB module implementations." "Objects that apply to all PCEP MIB module implementations."
::= { pcePcepGroups 1 } ::= { pcePcepGroups 1 }
pcePcepNotificationsGroup NOTIFICATION-GROUP pcePcepNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { pcePcepSessUp, NOTIFICATIONS { pcePcepSessUp,
pcePcepSessDown, pcePcepSessDown,
pcePcepSessLocalOverload, pcePcepSessLocalOverload,
pcePcepSessLocalOverloadClear, pcePcepSessLocalOverloadClear,
pcePcepSessPeerOverload, pcePcepSessPeerOverload,
pcePcepSessPeerOverloadClear pcePcepSessPeerOverloadClear
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The notifications for a PCEP MIB module implementation." "The notifications for a PCEP MIB module implementation."
::= { pcePcepGroups 2 } ::= { pcePcepGroups 2 }
END END
5. Security Considerations 5. Security Considerations
The readable objects in the PCE-PCEP-MIB module (i.e., those with The pcePcepNotificationsMaxRate object defined in this MIB module has
MAX-ACCESS other than not-accessible) may be considered sensitive in a MAX-ACCESS clause of read-write. Such objects may be considered
some environments since, collectively, they provide information about sensitive or vulnerable in some network environments. The support
the amount and frequency of path computation requests and responses for SET operations in a non-secure environment without proper
within the network and can reveal some aspects of their protection can have a negative effect on network operations. In
configuration. particular, pcePcepNotificationsMaxRate may be used improperly to
stop notifications being issued, or to permit a flood of
notifications to be sent to the management agent at a high rate.
In such environments it is important to control also GET and NOTIFY The readable objects in this MIB module (i.e., objects with a MAX-
access to these objects and possibly even to encrypt their values ACCESS other than not-accessible) may be considered sensitive or
when sending them over the network via SNMP. vulnerable in some network environments since, collectively, they
provide information about the amount and frequency of path
computation requests and responses within the network and can reveal
some aspects of its configuration. It is thus important to control
even GET and/or NOTIFY access to these objects and possibly to even
encrypt the values of these objects when sending them over the
network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec), Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is there is no control as to who on the secure network is allowed to
allowed to access and GET/SET (read/change/create/delete) the objects access and GET/SET (read/change/create/delete) the objects in this
in this MIB module. MIB module.
Implementations MUST provide the security features described by the Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), including full support for SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM) authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM) MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH [RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353]. [RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
skipping to change at page 51, line 29 skipping to change at page 51, line 29
module as read at PCE2 and PCCb. module as read at PCE2 and PCCb.
PCE1---PCE2 PCE3 PCE1---PCE2 PCE3
| / | / | | / | / |
| / | / | | / | / |
PCCa/ PCCb PCCc PCCa/ PCCb PCCc
The IP addresses of the PCE speakers in this diagram are given in the The IP addresses of the PCE speakers in this diagram are given in the
following table. following table.
+------+-------------+ +------+-------------+
| PCE1 | 1.1.1.1 | | PCE1 | 1.1.1.1 |
+------+-------------+ +------+-------------+
| PCE2 | 2.2.2.2 | | PCE2 | 2.2.2.2 |
+------+-------------+ +------+-------------+
| PCE3 | 3.3.3.3 | | PCE3 | 3.3.3.3 |
+------+-------------+ +------+-------------+
| PCCa | 11.11.11.11 | | PCCa | 11.11.11.11 |
+------+-------------+ +------+-------------+
| PCCb | 22.22.22.22 | | PCCb | 22.22.22.22 |
+------+-------------+ +------+-------------+
| PCCc | 33.33.33.33 | | PCCc | 33.33.33.33 |
+------+-------------+ +------+-------------+
In this example, the PCEP session between PCCb and PCE3 is currently In this example, the PCEP session between PCCb and PCE3 is currently
down. down.
B.1. Contents of PCEP MIB module at PCE2 B.1. Contents of PCEP MIB module at PCE2
At PCE2, there is a single local PCEP entity which has three peers At PCE2, there is a single local PCEP entity which has three peers
(PCCa, PCCb and PCE1). There is a session active to all of these (PCCa, PCCb and PCE1). There is a session active to all of these
peers. peers.
 End of changes. 233 change blocks. 
1775 lines changed or deleted 1783 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/