RATS Working Group                                           H. Birkholz
Internet-Draft                                                  M. Eckel
Intended status: Standards Track                          Fraunhofer SIT
Expires: December 26, 2020 April 3, 2021                                           E. Voit
                                                             S. Bhandari
                                                               B. Sulzen
                                                                 E. Voit
                                                                   Cisco
                                                                  L. Xia
                                                                  Huawei
                                                               T. Laffey
                                                                     HPE
                                                             G. Fedorkow
                                                                 Juniper
                                                           June 24,
                                                      September 30, 2020

   A YANG Data Model for Challenge-Response-based Remote Attestation
                         Procedures using TPMs
                   draft-ietf-rats-yang-tpm-charra-02
                   draft-ietf-rats-yang-tpm-charra-03

Abstract

   This document defines a YANG RPC and a minimal datastore tree required to
   retrieve attestation evidence about integrity measurements from a composite
   device with one or more roots of trust
   for reporting. following the operational context defined in
   [I-D.ietf-rats-tpm-based-network-device-attest].  Complementary
   measurement logs are also provided by the YANG RPC originating from
   one or more roots of trust of measurement.  The module defined
   requires at least one TPM 1.2 or TPM 2.0 and corresponding Trusted
   Software Stack included in the device components of the composite
   device the YANG server is running on.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 26, 2020. April 3, 2021.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Requirements notation . . . . . . . . . . . . . . . . . .   3
   2.  The YANG Module for Basic Remote Attestation Procedures . . .   3
     2.1.  Tree Diagram  . . . . . . . . . . . . . . . . . . . . . .   3
     2.2.  YANG Modules  . . . . . . . . . . . . . . . . . . . . . .   7   6
       2.2.1.  ietf-tpm-remote-attestation . . . . . . . . . . . . .   7
     2.3.  ietf-asymmetric-algs   6
       2.2.2.  ietf-tcg-algs . . . . . . . . . . . . . . . . . . .  32 .  35
   3.  IANA considerations . . . . . . . . . . . . . . . . . . . . .  42  51
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .  42  51
   5.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  42  52
   6.  Change Log  . . . . . . . . . . . . . . . . . . . . . . . . .  43  52
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  43  53
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .  43  53
     7.2.  Informative References  . . . . . . . . . . . . . . . . .  44  54
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  44  55

1.  Introduction

   This document is based on the terminology defined in the
   [I-D.ietf-rats-architecture] and uses the operational context defined
   in [I-D.ietf-rats-tpm-based-network-device-attest] as well as the
   interaction model and information elements defined in the
   [I-D.birkholz-rats-reference-interaction-model] document.
   [I-D.birkholz-rats-reference-interaction-model].  The currently
   supported hardware security modules (HWM) - sometimes also
   referred to as an embedded secure element (eSE) - is are the Trusted Platform
   Module (TPM) version 1.2 [TPM1.2] and 2.0 [TPM2.0] specified by the Trusted Computing
   Group (TCG).  One ore more TPMs embedded in the components of a
   composite device - sometimes also referred to as an aggregate device
   - are required in order to use the YANG module defined in this
   document.  A TPM is used as a root of trust for reporting (RTR) in
   order to retrieve attestation evidence from a composite device (quote
   primitive operation).  Additionally, it is used as a root of trust
   for storage (RTS) in order to retain shielded secrets and store
   system measurements using a folding hash function (extend primitive
   operation).

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  The YANG Module for Basic Remote Attestation Procedures

   One or more TPMs MUST be embedded in the composite device that is
   providing attestation evidence via the YANG module defined in this
   document.  The ietf-basic-remote-attestation YANG module enables a
   composite device to take on the role of Claimant and Attester in
   accordance with the Remote Attestation Procedures (RATS) architecture
   [I-D.ietf-rats-architecture] and the corresponding challenge-response
   interaction model defined in the
   [I-D.birkholz-rats-reference-interaction-model] document.  A fresh
   nonce with an appropriate amount of entropy MUST be supplied by the
   YANG client in order to enable a proof-of-freshness with respect to
   the attestation evidence provided by the attester running the YANG
   datastore.  The functions of this YANG module are restricted to 0-1
   TPMs per hardware component.

2.1.  Tree Diagram

  module: ietf-tpm-remote-attestation
    +--rw rats-support-structures
       +--rw supported-algos*   identityref compute-nodes!
       |  +--ro compute-nodes* compute-node* [node-id]
       |     +--ro node-id                string
       |     +--ro node-physical-index?   int32 {ietfhw:entity-mib}?
       |     +--ro node-name?             string
       |     +--ro node-location?         string
       +--rw tpms* tpms
       |  +--rw tpm* [tpm-name]
       |     +--rw tpm-name                string
       |     +--ro hardware-based?         boolean
       |     +--ro tpm-physical-index?     int32 {ietfhw:entity-mib}?
       |     +--ro tpm-path?               string
       |     +--ro compute-node            compute-node-ref
       |     +--ro tpm-manufacturer?       string
          +--ro tpm-firmware-version?        string
          +--ro tpm-specification-version
       |     +--rw tpm-firmware-version    identityref
       |     +--rw TPM12-hash-algo?        identityref
       |     +--rw TPM12-pcrs*             pcr
       |     +--rw tpm20-pcr-bank* [TPM20-hash-algo]
       |     |  +--rw TPM20-hash-algo    identityref
       |     |  +--rw pcr-index*         tpm:pcr
       |     +--ro tpm-status?                  string tpm-status              enumeration
       |     +--rw certificates
       |        +--rw certificate* [certificate-name]
       |           +--rw certificate-name            string
       |           +--rw certificate-ref? certificate-keystore-ref?   leafref
       |           +--rw certificate-type?           enumeration
       +--rw attester-supported-algos
          +--rw tpm12-asymmetric-signing*   identityref {taa:TPM12}?
          +--rw tpm12-hash*                 identityref {taa:TPM12}?
          +--rw tpm20-asymmetric-signing*   identityref {taa:TPM20}?
          +--rw tpm20-hash*                 identityref {taa:TPM20}?

    rpcs:
      +---x tpm12-challenge-response-attestation {TPM12}? {taa:TPM12}?
      |  +---w input
      |  |  +---w tpm1-attestation-challenge tpm12-attestation-challenge
      |  |     +---w pcr-index*          pcr
      |  |     +---w nonce-value         binary
      |  |     +---w TPM12_Algo?             identityref
      |  |     +---w (key-identifier)?
      |  |     |  +--:(public-key)
      |  |     |  |  +---w pub-key-id?       binary
      |  |     |  +--:(TSS_UUID)
      |  |     |     +---w TSS_UUID-value
      |  |     |        +---w ulTimeLow?       uint32
      |  |     |        +---w usTimeMid?       uint16
      |  |     |        +---w usTimeHigh?      uint16
      |  |     |        +---w bClockSeqHigh?   uint8
      |  |     |        +---w bClockSeqLow?    uint8
      |  |     |        +---w rgbNode*         uint8
      |  |     +---w add-version?        boolean
      |  |     +---w tpm-name*               string certificate-name*   certificate-name-ref
      |  +--ro output
      |     +--ro tpm12-attestation-response* []
      |        +--ro certificate-name?            string            certificate-name-ref
      |        +--ro up-time?                     uint32
      |        +--ro node-id?                     string
      |        +--ro node-physical-index?         int32
      |        |       {ietfhw:entity-mib}?
      |        +--ro fixed?                       binary
      |        +--ro external-data?               binary
      |        +--ro signature-size?              uint32
      |        +--ro signature?                   binary
      |        +--ro (tpm12-quote)
      |           +--:(tpm12-quote1)
      |           |  +--ro version* []
      |           |  |  +--ro major?       uint8
      |           |  |  +--ro minor?       uint8
      |           |  |  +--ro revMajor? rev-Major?   uint8
      |           |  |  +--ro revMinor? rev-Minor?   uint8
      |           |  +--ro digest-value?          binary
      |           |  +--ro TPM_PCR_COMPOSITE* []
      |           |     +--ro pcr-index*         pcr
      |           |     +--ro value-size?        uint32
      |           |     +--ro tpm12-pcr-value*   binary
      |           +--:(tpm12-quote2)
      |              +--ro tag?                   uint8
      |              +--ro pcr-index*             pcr
      |              +--ro locality-at-release?   uint8
      |              +--ro digest-at-release?     binary
      +---x tpm20-challenge-response-attestation {TPM20}? {taa:TPM20}?
      |  +---w input
      |  |  +---w tpm20-attestation-challenge
      |  |     +---w nonce-value            binary
      |  |     +---w challenge-objects* tpm20-pcr-selection* []
      |  |        +---w pcr-list* [TPM2_Algo]
      |  |     |  +---w TPM2_Algo TPM20-hash-algo?   identityref
      |  |     |  +---w pcr-index*         tpm:pcr
      |  |     +---w TPM2_Algo?          identityref
      |  |        +---w (key-identifier)?
      |  |        |  +--:(public-key)
      |  |        |  |  +---w pub-key-id?   binary
      |  |        |  +--:(uuid)
      |  |        |     +---w uuid-value?   binary
      |  |        +---w tpm-name*           string certificate-name*      certificate-name-ref
      |  +--ro output
      |     +--ro tpm20-attestation-response* []
      |        +--ro certificate-name?           string      certificate-name-ref
      |        +--ro TPMS_QUOTE_INFO        binary
      |        +--ro quote-signature?       binary
      |        +--ro up-time?               uint32
      |        +--ro node-id?               string
      |        +--ro node-physical-index?   int32
      |        | {ietfhw:entity-mib}?
      |        +--ro quote?                      binary
      |        +--ro quote-signature?            binary
      |        +--ro pcr-bank-values* unsigned-pcr-values* []
      |        |           +--ro TPM2_Algo? TPM20-hash-algo?   identityref
      |        |           +--ro pcr-values* [pcr-index]
      |        |              +--ro pcr-index    pcr
      |        |              +--ro pcr-value?   binary
      |        +--ro pcr-digest-algo-in-quote
      |           +--ro TPM2_Algo?   identityref
      +---x basic-trust-establishment
      |  +---w input
      |  |  +---w nonce-value         binary
      |  |  +---w TPM2_Algo?          identityref
      |  |  +---w tpm-name*           string
      |  |  +---w certificate-name?   string
      |  +--ro output
      |     +--ro attestation-certificates* []
      |        +--ro attestation-certificate?   ct:end-entity-cert-cms
      |        +--ro (key-identifier)?
      |           +--:(public-key)
      |           |  +--ro pub-key-id?          binary
      |           +--:(uuid)
      |              +--ro uuid-value?          binary
      +---x log-retrieval
         +---w input
         |  +---w log-selector* []
         |  |  +---w tpm-name*                  string
         |  |  +---w (index-type)?
         |  |  |  +--:(last-entry)
         |  |  |  |  +---w last-entry-value?    binary
         |  |  |  +--:(index)
         |  |  |  |  +---w last-index-number?   uint64
         |  |  |  +--:(timestamp)
         |  |  |     +---w timestamp?           yang:date-and-time
         |  |  +---w log-entry-quantity?        uint16
         |  +---w log-type        identityref
         +--ro output
            +--ro system-event-logs
               +--ro node-data* []
                  +--ro tpm-name?     string
                  +--ro up-time?      uint32
                  +--ro certificate-name?   string
                  +--ro log-result
                     +--ro (attested-event-log-type) (attested_event_log_type)
                        +--:(bios)
                        |  +--ro bios-event-logs
                        |     +--ro bios-event-entry* [event-number]
                        |        +--ro event-number    uint32
                        |        +--ro event-type?     uint32
                        |        +--ro pcr-index?      pcr
                        |        +--ro digest-list* []
                        |        |  +--ro hash-algo?   identityref
                        |        |  +--ro digest*      binary
                        |        +--ro event-size?     uint32
                        |        +--ro event-data*     uint8
                        +--:(ima)
                        |  +--ro ima-event-logs
                        |     +--ro ima-event-entry* [event-number]
                        |        +--ro event-number               uint64
                        |        +--ro ima-template?              string
                        |        +--ro filename-hint?             string
                        |        +--ro filedata-hash?             binary
                        |        +--ro filedata-hash-algorithm?   string
                        |        +--ro template-hash-algorithm?   string
                        |        +--ro template-hash?             binary
                        |        +--ro pcr-index?                 pcr
                        |        +--ro signature?                 binary
                        +--:(netequip_boot)
                           +--ro boot-event-logs
                              +--ro boot-event-entry* [event-number]
                                 +--ro event-number               uint64
                                 +--ro filename-hint?             string
                                 +--ro filedata-hash?             binary
                                 +--ro filedata-hash-algorithm?   string
                                 +--ro file-version?              string
                                 +--ro file-type?                 string
                                 +--ro pcr-index?                 pcr

2.2.  YANG Modules

2.2.1.  ietf-tpm-remote-attestation

   This YANG module imports modules from [RFC6991], [RFC8348],
   [I-D.ietf-netconf-crypto-types], ietf-asymmetric-algs.yang.
   [I-D.ietf-netconf-keystore], ietf-tcg-algs.yang.

2.2.1.1.  Identities

   This module supports the following types of attestation event logs:
   <ima>, <bios>, and <netequip_boot>.

2.2.1.2.  RPCs

   <tpm12-challenge-response-attestation> - Allows a Verifier to request
   a quote of PCRs from a TPM1.2 compliant cryptoprocessor.  When one or
   more <certificate-name> is not provided, all TPM1.2 compliant
   cryptoprocessors will respond.

   <tpm20-challenge-response-attestation> - Allows a Verifier to request
   a quote of PCRs from a TPM2.0 compliant cryptoprocessor.  When one or
   more <certificate-name> is not provided, all TPM2.0 compliant
   cryptoprocessors will respond.

   <log-retrieval> - Allows a Verifier to acquire the evidence which was
   extended into specific PCRs.

2.2.1.3.  Data Nodes

   container <rats-support-structures> - This exists when there are more
   than one TPM for a particular Attester.  This allows each specific
   TPM to identify on which <compute-node> it belongs.

   container <tpms> - Provides configuration and operational details for
   each supported TPM, including the tpm-firmware-version, PCRs which
   may be quoted, certificates which are associated with that TPM, and
   the current operational status.  Of note is the certificates which
   are associated with that TPM.  As a certificate is associated with a
   single Attestation key, knowledge of the certificate allows a
   specific TPM to be identified.

   container <attester-supported-algos> - Identifies which TCG
   algorithms are available for use the Attesting platform.  This allows
   an operator to limit algorithms available for use by RPCs to just a
   desired set from the universe of all allowed by TCG.

2.2.1.4.  YANG Module

<CODE BEGINS> file ietf-tpm-remote-attestation@2020-06-23.yang ietf-tpm-remote-attestation@2020-09-18.yang
module ietf-tpm-remote-attestation {
  namespace "urn:ietf:params:xml:ns:yang:ietf-tpm-remote-attestation";
  prefix "tpm";

  import ietf-yang-types {
    prefix yang;
  }
  import ietf-hardware {
    prefix ietfhw;
  }
  import ietf-crypto-types {
    prefix ct;
  }
  import ietf-keystore {
    prefix ks;
  }
  import ietf-asymmetric-algs ietf-tcg-algs {
    prefix aa; taa;

  }

  organization
   "IETF RATS (Remote ATtestation procedureS) Working Group";

  contact
   "WG Web  : <http://datatracker.ietf.org/wg/rats/>
    WG List : <mailto:rats@ietf.org>
    Author  : Eric Voit <evoit@cisco.com>
    Author  : Henk Birkholz <henk.birkholz@sit.fraunhofer.de>
    Author  : Michael Eckel <michael.eckel@sit.fraunhofer.de>
    Author  : Shwetha Bhandari <shwethab@cisco.com>
    Author  : Bill Sulzen <bsulzen@cisco.com>
    Author  : Eric Voit <evoit@cisco.com>
    Author  : Liang Xia (Frank) <frank.xialiang@huawei.com>
    Author  : Tom Laffey <tom.laffey@hpe.com>
    Author  : Guy Fedorkow <gfedorkow@juniper.net>";

  description
    "A YANG module to enable a TPM 1.2 and TPM 2.0 based
     remote attestation procedure using a challenge-response
     interaction model and the TPM 1.2 and TPM 2.0 Quote
     primitive operations.

     Copyright (c) 2020 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Simplified
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     Redistribution and use in source and binary forms, with or
     without modification, is permitted pursuant to, and subject to
     the license terms contained in, the Simplified BSD License set
     forth in Section 4.c of the IETF Trust's Legal Provisions
     Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC XXXX
     (https://www.rfc-editor.org/info/rfcXXXX); see the RFC
     itself for full legal notices.

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision "2020-06-23" "2020-09-18" {
    description
      "Initial version";
    reference
      "draft-ietf-rats-yang-tpm-charra";
  }

  /*****************/
  /*   Features    */
  /*****************/

  feature TPM12 {
    description
      "This feature indicates that an Attester includes cryptoprocessors
       capable of supporting the TPM 1.2 API.";
  }

  feature TPM20 {
    description
      "This feature indicates that an Attester includes cryptoprocessors
       capable of supporting the TPM 2 API.";

  }

  /*****************/
  /*   Typedefs    */
  /*****************/

  typedef pcr {
    type uint8 {
      range "0..31";
    }
    description
      "Valid index number for a PCR.  At this point 0-31 is viable.";
  }

  typedef compute-node-ref {
    type leafref {
      path "/tpm:rats-support-structures/tpm:compute-nodes/tpm:node-name"; "/tpm:rats-support-structures/tpm:compute-nodes" +
           "/tpm:compute-node/tpm:node-name";
    }
    description
      "This type is used to reference a hardware node.  It is quite
      possible this leafref will eventually point to another YANG
      module's node.";
  }

  /******************/
  /*   Identities   */

  typedef certificate-name-ref {
    type leafref {
      path "/tpm:rats-support-structures/tpm:tpms/tpm:tpm" +
           "/tpm:certificates/tpm:certificate/tpm:certificate-name";
    }
    description
      "A type which allows identification of a TPM based certificate.";
  }

  /******************/
  /*   Identities   */
  /******************/
  identity attested-event-log-type attested_event_log_type {
    description
      "Base identity allowing categorization of the reasons why and
      attested measurement has been taken on an Attester.";
  }

  identity ima {
    base attested-event-log-type; attested_event_log_type;
    description
      "An event type recorded in IMA.";
  }

  identity bios {
    base attested-event-log-type; attested_event_log_type;
    description
      "An event type associated with BIOS/UEFI.";
  }

  identity cryptoprocessor {
    description
      "Base identity identifying a crytoprocessor.";
  }

  identity tpm12 {
    base cryptoprocessor;
    description
      "A cryptoprocessor capable of supporting the TPM 1.2 API.";
  }

  identity tpm20 netequip_boot {
    base cryptoprocessor; attested_event_log_type;
    description
      "A cryptoprocessor capable of supporting the TPM 2.0 API.";
      "An event type associated with Network Equipment Boot.";
  }

  /*****************/
  /*   Groupings   */
  /*****************/

  grouping TPM2_Algo TPM20-asymmetric-signing-algo {
    description
      "The signature scheme that is used to sign the TPM2 Quote
      information response.";
    leaf TPM2_Algo TPM20-asymmetric-signing-algo {
      must "/tpm:rats-support-structures/tpm:attester-supported-algos"
         + "/tpm:tpm20-asymmetric-signing" {
         error-message "Not a platform supported " +
                       "TPM20-asymmetric-signing-algo";
      }
      type identityref {
        base aa:tpm2-asymmetric-algorithm; taa:asymmetric;
      }
      description
        "The signature scheme that is used to sign the TPM TPM2.0
         Quote information response."; response. This must be one of those
         supported by a platform.";
    default taa:TPM_ALG_RSA;
    }
  }
  grouping TPM12_Algo TPM12-asymmetric-signing-algo {
    description
      "The signature scheme that is used to sign the TPM2 TPM12 Quote
      information response.";
    leaf TPM12_Algo TPM12-asymmetric-signing-algo {
      must "/tpm:rats-support-structures/tpm:attester-supported-algos"
         + "/tpm:tpm12-asymmetric-signing" {
         error-message "Not a platform supported " +
                       "TPM12-asymmetric-signing-algo";
      }
      type identityref {
        base aa:tpm12-asymmetric-algorithm; taa:asymmetric;
      }
      description
        "The signature scheme that is used to sign the TPM1.2
         Quote information response."; response. This must be one of those
         supported by a platform.";
    default taa:TPM_ALG_RSA;
    }
  }

  grouping TPM20-hash-algo {
    description
      "The cryptographic algorithm used to hash the TPM2 PCRs.  This
      must be from the list of platform supported options.";
    leaf TPM20-hash-algo {
      must "/tpm:rats-support-structures/tpm:attester-supported-algos"
         + "/tpm:tpm20-hash" {
         error-message "Not a platform supported TPM20-hash-algo";
      }
      type identityref {
        base taa:hash;
      }
      description
        "The hash scheme that is used to hash a TPM1.2 PCR. This
        must be one of those supported by a platform.";
    default taa:TPM_ALG_SHA256;
    }
  }

  grouping TPM12-hash-algo {
    description
      "The cryptographic algorithm used to hash the TPM1.2 PCRs.";
    leaf TPM12-hash-algo {
      must "/tpm:rats-support-structures/tpm:attester-supported-algos"
         + "/tpm:tpm12-hash" {
         error-message "Not a platform supported TPM12-hash-algo";
      }
      type identityref {
        base taa:hash;
      }
      description
        "The hash scheme that is used to hash a TPM1.2 PCR. This
        must be one of those supported by a platform.  This assumes
        that an algorithm other than SHA1 can be supported on some
        TPM1.2 cryptoprocessor variant.";
      default taa:TPM_ALG_SHA1;
    }
  }

  grouping nonce {
    description
      "A nonce to show freshness and counter replays."; to allow the detection
      of replay attacks.";
    leaf nonce-value {
      type binary;
      mandatory true;
      description
        "This nonce SHOULD be generated via a registered
         cryptographic-strength algorithm. In consequence,
         the length of the nonce depends on the hash algorithm
         used. The algorithm used in this case is independent
         from the hash algorithm used to create the hash-value
         in the response of the attestor.";
    }
  }

  grouping tpm12-pcr-selection {
    description
      "A Verifier can request one or more PCR values using its
       individually created Attestation Key Certificate (AC).
       The corresponding selection filter is represented in this
       grouping.
       Requesting a PCR value that is not in scope of the AC used,
       detailed exposure via error msg should be avoided.";
    leaf-list pcr-index {
      /*  the following XPATH must be updated to ensure that only
            selectable PCRs are allowed in the RPC
      must "/tpm:rats-support-structures/tpm:tpms" +
           "/tpm:tpm[tpm-name = current()]" +
           "/tpm:tpm[TPM12-pcrs = current()]" {
        error-message "Acquiring this PCR index is not supported";
      }
      */
      type pcr;
      description
        "The numbers/indexes of the PCRs. At the moment this is limited
        to 32.";
    }
  }

  grouping tpm20-pcr-selection {
    description
      "A Verifier can acquire one or more PCR values, which are hashed
       together in a TPM2B_DIGEST coming from the TPM2.  The selection
       list of desired PCRs and the Hash Algorithm is represented in
       this grouping.";
    list pcr-list tpm20-pcr-selection {
      key "TPM2_Algo";
      unique "TPM20-hash-algo";
      description
        "Specifies the list of PCRs and Hash Algorithms used for the
         latest that can be
        returned within a TPM2B_DIGEST.";
      reference
        "https://www.trustedcomputinggroup.org/wp-content/uploads/
         TPM-Rev-2.0-Part-2-Structures-01.38.pdf  Section 10.9.7";
      uses tpm:TPM2_Algo; TPM20-hash-algo;
      leaf-list pcr-index {
        type tpm:pcr;
        description
          "The numbers of the PCRs that are associated with
           the created key.";
      }
    }
  }

  grouping tpm12-attestation-key-identifier {
    description
      "A selector for a suitable key identifier for a TPM 1.2.";
    choice key-identifier {
      description
        "Identifier for
        /*  the attestation key following XPATH must be updated to use for signing
         attestation evidence.";
      case public-key {
        leaf pub-key-id {
          type binary;
          description
            "The value of the identifier for the public key.";
        }
      }
      case TSS_UUID {
        description
          "Use a YANG agent generated (and maintained) attestation
           key UUID that complies with the TSS_UUID datatype of the TCG
           Software Stack (TSS) Specification, Version 1.10 Golden,
           August 20, 2003.";
        container TSS_UUID-value {
          description
            "A detailed structure ensure that is used to create the
             TPM 1.2 native TSS_UUID as defined only
            selectable PCRs are allowed in the TCG Software
             Stack (TSS) Specification, Version 1.10 Golden,
             August 20, 2003.";
          leaf ulTimeLow {
            type uint32;
            description
              "The low field of the timestamp.";
          }
          leaf usTimeMid {
            type uint16;
            description
              "The middle field of the timestamp.";
          }
          leaf usTimeHigh RPC
        must "/tpm:rats-support-structures/tpm:tpms" +
             "/tpm:tpm[tpm-name = current()]" +
             "/tpm:tpm20-pcr-bank[pcr-index = current()]" {
            type uint16;
            description
              "The high field of the timestamp multiplexed with the
               version number.";
          error-message "Acquiring this PCR index is not supported";
        }
          leaf bClockSeqHigh {
        */
        type uint8; tpm:pcr;
        description
          "The high field numbers of the clock sequence multiplexed PCRs that which are being tracked
          with
               the variant.";
          }
          leaf bClockSeqLow {
            type uint8;
            description
              "The low field of the clock sequence.";
          }
          leaf-list rgbNode {
            type uint8;
            description
              "The spatially unique node identifier.";
          }
        }
      }
    }
  }

  grouping tpm20-attestation-key-identifier {
    description
      "A selector for a suitable key identifier.";
    choice key-identifier {
      description
        "Identifier for the attestation key to use for signing
         attestation evidence.";
      case public-key {
        leaf pub-key-id {
          type binary;
          description
            "The value of the identifier for the public key.";
        }
      }
      case uuid {
        description
          "Use a YANG agent generated (and maintained) attestation
           key UUID.";
        leaf uuid-value {
          type binary;
          description
            "The UUID identifying hash based on the corresponding public key.";
        } TPM20-hash-algo.";
      }
    }
  }

  grouping certificate-name certificate-name-ref {
    description
      "An arbitrary name for the identity
      "Identifies a certificate chain requested."; in a keystore.";
    leaf certificate-name {
      type string; certificate-name-ref;
        description
        "An arbitrary name for the identity
          "Identifies a certificate chain requested."; in a keystore.";
    }
  }

  grouping tpm-name {
    description
      "Path to a
      "A unique TPM on a device.";
    leaf tpm-name {
      type string;
      description
        "Unique system generated name for a TPM on a device.";
    }
  }

  grouping tpm-name-selector {
    description
      "One or more TPM on a device.";
    leaf-list tpm-name {
      type string;
      config false;
      description
        "Name of one or more unique TPMs on a device.  If this object
        exists, a selection should pull only the objects related to
        these TPM(s).  If it does not exist, all qualifying TPMs that
        are 'hardware-based' equals true on the device are selected.";
    }
  }

  grouping compute-node-identifier {
    description
      "In a distributed system with multiple compute nodes
       this is the node identified by name and physical-index.";
    leaf node-id {
       type string;
       description
         "ID of the compute node, such as Board Serial Number.";
    }
    leaf node-physical-index {
      if-feature ietfhw:entity-mib;
      type int32 {
        range "1..2147483647";
      }
      config false;
       description
         "The entPhysicalIndex for the compute node.";
       reference
         "RFC 6933: Entity MIB (Version 4) - entPhysicalIndex";
    }
  }

  grouping tpm12-pcr-info-short {
    description
      "This structure is for defining a digest at release when the only
       information that is necessary is the release configuration.";
    uses tpm12-pcr-selection;
    leaf locality-at-release {
      type uint8;
      description
        "This SHALL be the locality modifier required to release the
         information (TPM 1.2 type TPM_LOCALITY_SELECTION)";
      reference
        "TPM Main Part 2 TPM Structures v1.2 July 2007
        Section 8.6";
    }
    leaf digest-at-release {
      type binary;
      description
        "This SHALL be the digest of the PCR indices and PCR values
         to verify when revealing auth data (TPM 1.2 type
         TPM_COMPOSITE_HASH).";
      reference
        "TPM Main Part 2 TPM Structures v1.2 July 2007
        Section 5.4.1.";
    }
  }

  grouping tpm12-version {
    description
      "This structure provides information relative the version of
      the TPM.";
    list version {
      description
        "This indicates the version of the structure
         (TPM 1.2 type TPM_STRUCT_VER). This MUST be 1.1.0.0.";
      reference
        "TPM Main Part 2 TPM Structures v1.2 July 2007
        Section 5.1.";
      leaf major {
        type uint8;
        description
          "Indicates the major version of the structure.
           MUST be 0x01.";
      }
      leaf minor {
        type uint8;
        description
          "Indicates the minor version of the structure.
           MUST be 0x01.";
      }
      leaf revMajor rev-Major {
        type uint8;
        description
          "Indicates the rev major version of the structure.
           MUST be 0x00.";
      }
      leaf revMinor rev-Minor {
        type uint8;
        description
          "Indicates the rev minor version of the structure.
           MUST be 0x00.";
      }
    }
  }

  grouping tpm12-quote-info-common {
    description
      "These statements are used in bot within both quote variants of the TPM 1.2";
    reference
      "TPM Main Part 2 TPM Structures v1.2 July 2007,
      Section 11.3 & 11.4.";
    leaf fixed {
      type binary;
      description
        "This SHALL always be the string 'QUOT' or 'QUO2'
         (length is 4 bytes).";
    }
    leaf external-data {
      type binary;
      description
        "160 bits of externally supplied data, typically a nonce.";
    }
    leaf signature-size {
      type uint32;
      description
       "The size of TPM 1.2 'signature' value.";
    }
    leaf signature {
      type binary;
      description
        "Signature over SHA-1 hash of tpm12-quote-info2'.";
    }
  }

  grouping tpm12-quote-info {
    description
      "This structure provides the mechanism for the TPM to quote the
       current values of a list of PCRs (as used by the TPM_Quote2
       command).";
    uses tpm12-version;
    leaf digest-value {
      type binary;
      description
        "This SHALL be the result of the composite hash algorithm using
         the current values of the requested PCR indices
         (TPM 1.2 type TPM_COMPOSITE_HASH.)";
    }
  }

  grouping tpm12-quote-info2 {
    description
      "This structure provides the mechanism for the TPM to quote the
       current values of a list of PCRs
       (as used by the TPM_Quote2 command).";
    leaf tag {
      type uint8;
      description
        "This SHALL be TPM_TAG_QUOTE_INFO2.";
    }
    uses tpm12-pcr-info-short;
  }

  grouping tpm12-cap-version-info {
    description
      "TPM returns the current version and revision of the TPM 1.2 .";
    list TPM_PCR_COMPOSITE {
      description
        "The TPM 1.2 TPM_PCRVALUEs for the pcr-indices.";
      reference
        "TPM Main Part 2 TPM Structures v1.2 July 2007, Section 8.2";
      uses tpm12-pcr-selection;
      leaf value-size {
        type uint32;
        description
          "This SHALL be the size of the 'tpm12-pcr-value' field
           (not the number of PCRs).";
      }
      leaf-list tpm12-pcr-value {
        type binary;
        description
          "The list of TPM_PCRVALUEs from each PCR selected in sequence
           of tpm12-pcr-selection.";
      }
      list version-info {
        description
          "An optional output parameter from a TPM 1.2 TPM_Quote2.";
        leaf tag {
          type uint16;  /* This should be converted into an ENUM */
          description
            "The TPM 1.2 version and revision
             (TPM 1.2 type TPM_STRUCTURE_TAG).
             This MUST be TPM_CAP_VERSION_INFO (0x0030)";
        }
        uses tpm12-version;
        leaf spec-level {
          type uint16;
          description
            "A number indicating the level of ordinals supported.";
        }
        leaf errata-rev {
          type uint8;
          description
            "A number indicating the errata version of the
             specification.";
        }
        leaf tpm-vendor-id {
          type binary;
          description
            "The vendor ID unique to each TPM manufacturer.";
        }
        leaf vendor-specific-size {
          type uint16;
          description
            "The size of the vendor-specific area.";
        }
        leaf vendor-specific {
          type binary;
          description
            "Vendor specific information.";
        }
      }
    }
  }

  grouping tpm12-pcr-composite {
    description
      "The actual values of the selected PCRs (a list of TPM_PCRVALUEs
       (binary) and associated metadata for TPM 1.2.";
    list TPM_PCR_COMPOSITE {
      description
        "The TPM 1.2 TPM_PCRVALUEs for the pcr-indices.";
      reference
        "TPM Main Part 2 TPM Structures v1.2 July 2007, Section 8.2";
      uses tpm12-pcr-selection;
      leaf value-size {
        type uint32;
        description
          "This SHALL be the size of the 'tpm12-pcr-value' field
           (not the number of PCRs).";
      }
      leaf-list tpm12-pcr-value {
        type binary;
        description
          "The list of TPM_PCRVALUEs from each PCR selected in sequence
           of tpm12-pcr-selection.";
      }
    }
  }

  grouping node-uptime {
    description
      "Uptime in seconds of the node.";
    leaf up-time {
      type uint32;
      description
        "Uptime in seconds of this node reporting its data";
    }
  }

  grouping tpm12-attestation {
    description
      "Contains an instance of TPM1.2 style signed cryptoprocessor
      measurements.  It is supplemented by unsigned Attester
      information.";
    uses certificate-name;
    uses node-uptime;
    uses compute-node-identifier;
    uses tpm12-quote-info-common;
    choice tpm12-quote {
      mandatory true;
      description
        "Either a tpm12-quote-info or tpm12-quote-info2, depending
         on whether TPM_Quote or TPM_Quote2 was used
         (cf. input field add-verson).";
      case tpm12-quote1 {
        description
          "BIOS/UEFI event logs";
        uses tpm12-quote-info;
        uses tpm12-pcr-composite;
      }
      case tpm12-quote2 {
        description
          "BIOS/UEFI event logs";
        uses tpm12-quote-info2;
      }

    }
  }

  grouping tpm20-attestation {
    description
      "Contains an instance of TPM2 style signed cryptoprocessor
      measurements.  It is supplemented by unsigned Attester
      information.";
    uses certificate-name;
    uses node-uptime;
    uses compute-node-identifier;
    leaf quote TPMS_QUOTE_INFO {
      mandatory true;
      type binary;
      description
        "Quote data returned by TPM Quote, including PCR selection,
        "A hash of the latest PCR digest values (and the hash algorithm used)
        which have been returned from a Verifier for the selected PCRs
        and etc."; Hash Algorithms.";
      reference
        "https://www.trustedcomputinggroup.org/wp-content/uploads/
        TPM-Rev-2.0-Part-2-Structures-01.38.pdf  Section 10.12.1";
    }
    leaf quote-signature {
      type binary;
      description
        "Quote signature returned by TPM Quote."; Quote.  The signature was
        generated using the key associated with the
        certificate-name.";
    }
    uses node-uptime;
    uses compute-node-identifier;
    list pcr-bank-values unsigned-pcr-values {
      /*
      description
        "PCR values in each PCR bank. This often should not be
         necessary for TPM2, as the raw information
         if validated needing
         signature and hash validation will need to be coming from
         the 'quote' leaf       */
      description
        "PCR values in each PCR bank."; leaf";
      uses TPM2_Algo; TPM20-hash-algo;
      list pcr-values {
        key pcr-index;
        description
          "List of one PCR bank.";
        leaf pcr-index {
          type pcr;
          description
            "PCR index number.";
        }
        leaf pcr-value {
          type binary;
          description
            "PCR value.";

        }
      }
    }
    container pcr-digest-algo-in-quote {
      uses TPM2_Algo;
      description
        "The hash algorithm for PCR value digest in Quote output.";
    }
  }

  grouping log-identifier {
    description
      "Identifier for type of log to be retrieved.";
    leaf log-type {
      type identityref {
        base attested-event-log-type; attested_event_log_type;
      }
      mandatory true;
      description
        "The corresponding measurement log type identity.";
    }
  }

  grouping boot-event-log {
    description
      "Defines an event log corresponding to the event that extended
      the PCR";
    leaf event-number {
      type uint32;
      description
        "Unique event number of this event";
    }
    leaf event-type {
        type uint32;
        description
          "log event type";
    }
    leaf pcr-index {
      type pcr;
      description
        "Defines the PCR index that this event extended";
    }
    list digest-list {
      description
        "Hash of event data";
      leaf hash-algo {
        type identityref {
          base aa:asymmetric-algorithm-type; taa:hash;
        }
        description
          "The hash scheme that is used to compress the event data in
          each of the leaf-list digest items.";

      }
      leaf-list digest {
        type binary;
        description
          "The hash of the event data";
      }
    }
    leaf event-size {
      type uint32;
      description
        "Size of the event data";
    }
    leaf-list event-data {
      type uint8;
      description
        "The event data size determined by event-size"; data size determined by event-size";
    }
  }

  grouping bios-event-log {
    description
      "Measurement log created by the BIOS/UEFI.";
    list bios-event-entry {
      key event-number;
        description
          "Ordered list of TCG described event log
           that extended the PCRs in the order they
           were logged";
      uses boot-event-log;
    }
  }

  grouping ima-event {
    description
      "Defines an hash log extend event for IMA measurements";
    leaf event-number {
      type uint64;
      description
        "Unique number for this event for sequencing";
    }
    leaf ima-template {
      type string;
      description
        "Name of the template used for event logs
         for e.g. ima, ima-ng, ima-sig";
    }
    leaf filename-hint {
      type string;
      description
        "File that was measured";
    }
    leaf filedata-hash {
      type binary;
      description
        "Hash of filedata";
    }
    leaf filedata-hash-algorithm {
      type string;
      description
        "Algorithm used for filedata-hash";
    }
    leaf template-hash-algorithm {
      type string;
      description
        "Algorithm used for template-hash";
    }
    leaf template-hash {
      type binary;
      description
        "hash(filedata-hash, filename-hint)";
    }
    leaf pcr-index {
      type pcr;
      description
        "Defines the PCR index that this event extended";
    }
    leaf signature {
      type binary;
      description
        "The file signature";
    }
  }

  grouping bios-event-log ima-event-log {
    description
      "Measurement log created by the BIOS/UEFI."; IMA.";
    list bios-event-entry ima-event-entry {
      key event-number;
      description
      "Ordered list of TCG described ima event logs by event-number";
       uses ima-event;
    }
  }

  grouping netequip-boot-event {
    description
      "Defines an hash log extend event for Network Equipment Boot.";
    leaf event-number {
      type uint64;
      description
        "Unique number for this event for sequencing";
    }
    leaf filename-hint {
      type string;
      description
        "File that extended was measured";
    }
    leaf filedata-hash {
      type binary;
      description
        "Hash of filedata";
    }
    leaf filedata-hash-algorithm {
      type string;
      description
        "Algorithm used for filedata-hash.";
      }
    leaf file-version {
      type string;
      description
        "File version information.";
    }
    leaf file-type {
      type string;
      description
        "Indicating at which boot stage the PCRs in file is loaded,
         such as BIOS, BootLoader, etc.";
    }
    leaf pcr-index {
      type pcr;
      description
        "Defines the order they
           were logged";
      uses boot-event-log; PCR index that this event extended";
    }
  }

  grouping ima-event-log network-equipment-boot-event-log {
    description
      "Measurement log created by Network Equipment Boot.";
    list ima-event-entry boot-event-entry {
      key event-number;
      description
        "Ordered list of ima Network Equipment Boot event logs
         by event-number"; event-number.";
      uses ima-event; netequip-boot-event;

    }
    description
      "Measurement log created by IMA.";
  }

  grouping event-logs {
    description
      "A selector for the log and its type.";
    choice attested-event-log-type attested_event_log_type {
      mandatory true;
      description
        "Event log type determines the event logs content.";
      case bios {
        description
          "BIOS/UEFI event logs";
        container bios-event-logs {
          description
            "This is an index referencing the TCG Algorithm
             Registry based on TPM_ALG_ID.";
            "BIOS/UEFI event logs";
          uses bios-event-log;
        }
      }
      case ima {
        description
          "IMA event logs"; logs.";
        container ima-event-logs {
          description
            "This is an index referencing the TCG Algorithm
             Registry based on TPM_ALG_ID.";
            "IMA event logs.";
          uses ima-event-log;
        }
      }
      case netequip_boot {
        description
          "Network Equipment Boot event logs";
        container boot-event-logs {
          description
            "Network equipment boot event logs.";
          uses network-equipment-boot-event-log;
        }
      }
    }
  }

  /**********************/
  /*   RPC operations   */
  /**********************/

  rpc tpm12-challenge-response-attestation {
    if-feature "TPM12"; "taa:TPM12";
    description
      "This RPC accepts the input for TSS TPM 1.2 commands of the
       managed device. ComponentIndex from the hardware manager YANG
       module to refer made to dedicated TPM in composite devices,
       e.g. smart NICs, is still a TODO."; the
       attesting device.";
    input {
      container tpm1-attestation-challenge tpm12-attestation-challenge {
        description
          "This container includes every information element defined
           in the reference challenge-response interaction model for
           remote attestation. Corresponding values are based on
           TPM 1.2 structure definitions";
        uses tpm12-pcr-selection;
        uses nonce;
        uses TPM12_Algo;
        uses tpm12-attestation-key-identifier;
        leaf add-version {
          type boolean; boolean;
          description
            "Whether or not to include TPM_CAP_VERSION_INFO; if true,
             then TPM_Quote2 must be used to create the response.";
          reference
            "TPM Main Part 2 TPM Structures v1.2 July 2007,
            Section 21.6";
        }
        leaf-list certificate-name {
          must "/tpm:rats-support-structures/tpm:tpms" +
               "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm12']" +
               "/tpm:certificates/" +
               "/tpm:certificate[certificate-name-ref=current()]" {
            error-message "Not an available TPM1.2 AIK certificate.";
          }
          type certificate-name-ref;
          description
            "Whether or not to include TPM_CAP_VERSION_INFO; if true,
             then TPM_Quote2 must be used to create
            "When populated, the response."; RPC will only get a Quote for the
            TPMs associated with these certificate(s).";
        }
        uses tpm-name-selector;
          /* if this scheme is desired, we should define XPATH to limit
           selection to just 'tpm-name' that are '../tpm-specification-version'
           equals 'TPM12' and where '../hardware-based' equals 'true' */
      }
    }
    output {
      list tpm12-attestation-response {
        unique "certificate-name";
        description
          "The binary output of TPM 1.2 TPM_Quote/TPM_Quote2, including
           the PCR selection and other associated attestation evidence
           metadata";
        uses certificate-name-ref {
          description
            "Certificate associated with this tpm12-attestation.";
        }
        uses tpm12-attestation;
      }
    }
  }
  rpc tpm20-challenge-response-attestation {
    if-feature "TPM20"; "taa:TPM20";
    description
      "This RPC accepts the input for TSS TPM 2.0 commands of the
       managed device. ComponentIndex from the hardware manager YANG
       module to refer to dedicated TPM in composite devices,
       e.g. smart NICs, is still a TODO.";
    input {
      container tpm20-attestation-challenge {
        description
          "This container includes every information element defined
           in the reference challenge-response interaction model for
           remote attestation. Corresponding values are based on
           TPM 2.0 structure definitions";
        uses nonce;
        list challenge-objects {
          description
            "Nodes to fetch attestation information, PCR selection
             and AK identifier.";
        uses tpm20-pcr-selection;
          uses TPM2_Algo;
          uses tpm20-attestation-key-identifier;
          uses tpm-name-selector;
          /* if this scheme is desired, we should define XPATH to limit
           selection to just 'tpm-name' that are '../tpm-specification-version'
           equals 'TPM2' and where '../hardware-based' equals 'true' */
        leaf-list certificate-name {
          must "/tpm:rats-support-structures/tpm:tpms" +
               "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm20']" +
               "/tpm:certificates/" +
               "/tpm:certificate[certificate-name-ref=current()]" {
            error-message "Not an available TPM2.0 AIK certificate.";
          }
          type certificate-name-ref;
            description
              "When populated, the RPC will only get a Quote for the
              TPMs associated with the certificates.";
        }
      }
    }
    output {
      list tpm20-attestation-response {
        unique "certificate-name";   /* should have XPATH making this mandatory
                                when there is more than one list entry */
        description
          "The binary output of TPM2b_Quote in one TPM chip of the
           node which identified by node-id. An TPMS_ATTEST structure
           including a length, encapsulated in a signature";
        uses tpm20-attestation;
      }
    }
  }

  rpc basic-trust-establishment {
    description
      "This RPC creates a tpm-resident, non-migratable key to be used
       in TPM_Quote commands, an attestation certificate.";
    input {
      uses nonce;
      uses TPM2_Algo;
      leaf-list tpm-name {
        when "not(../certificate-name)";  /* ensures both are not populated */
        type string;
        description
          "Path to a unique TPM on a device.  If there are no elements in the
          leaf-list, all TPMs which are 'hardware-based' should have keys
          established.";
      }
      uses certificate-name {
        description
          "It is possible to request a new certificate using the old one as a
          reference.";
      }
    }
    output {
      list attestation-certificates {
        description
          "Attestation Certificate data from a TPM identified by the TPM
           name";
        leaf attestation-certificate certificate-name-ref {
          type ct:end-entity-cert-cms;
          description
            "The binary signed certificate chain data for
            "Certificate associated with this identity
             certificate."; tpm20-attestation.";
        }
        uses tpm20-attestation-key-identifier; tpm20-attestation;
      }
    }
  }

  rpc log-retrieval {
    description
      "Logs Entries are either identified via indices or via providing
       the last line received. The number of lines returned can be
       limited. The type of log is a choice that can be augmented.";
    input {
      list log-selector {
        description
          "Selection of log entries to be reported.";
        uses tpm-name-selector;
        choice index-type {
          description
            "Last log entry received, log index number, or timestamp.";
          case last-entry {
            description
              "The last entry of the log already retrieved.";
            leaf last-entry-value {
              type binary;
              description
                "Content of an log event which matches 1:1 with a
                 unique event record contained within the log.  Log
                 entries subsequent to this will be passed to the
                 requester.  Note: if log entry values are not unique,
                 this MUST return an error.";
            }
          }
          case index {
            description
              "Numeric index of the last log entry retrieved, or
               zero.";
            leaf last-index-number {
              type uint64;
              description
                "The last numeric index number of a log entry.
                 Zero means to start at the beginning of the log.
                 Entries subsequent to this will be passed to the
                 requester.";
            }
          }
          case timestamp {
            leaf timestamp {
              type yang:date-and-time;
              description
                "Timestamp from which to start the extraction.  The
                 next log entry subsequent to this timestamp is to
                 be sent.";
            }
            description
              "Timestamp from which to start the extraction.";
          }

        }
        leaf log-entry-quantity {
          type uint16;
          description
            "The number of log entries to be returned. If omitted, it
             means all of them.";
        }
      }
      uses log-identifier;
    }

    output {
      container system-event-logs {
        description
          "The requested data of the measurement event logs";
        list node-data {
          unique "certificate-name"; "tpm-name";
          description
            "Event logs of a node in a distributed system
             identified by the node name";
          uses node-uptime; tpm-name;
          uses certificate-name; node-uptime;
          container log-result {
            description
              "The requested entries of the corresponding log.";
            uses event-logs;
          }
        }
      }
    }
  }

  /**************************************/
  /*   Config & Oper accessible nodes   */
  /**************************************/

  container rats-support-structures {
    description
      "The datastore definition enabling verifiers or relying
       parties to discover the information necessary to use the
       remote attestation RPCs appropriately.";
    leaf-list supported-algos {
      config true;
      type identityref
       remote attestation RPCs appropriately.";
    container compute-nodes {
        base aa:asymmetric-algorithm-type;
      }
      presence
        "Indicates that more than one TPM exists on a device.";
      description
        "Supported algorithms values for an Attester.";
    }
        "Holds the set device subsystems/components in this composite
         device that support TPM operations.";
      list compute-nodes compute-node {
      config false;
        key node-id;
        config false;
        min-elements 2;
        uses compute-node-identifier;
        description
          "A list names of hardware components in this composite device that RATS can be conducted with."; which
          supports TPM operations.";
        leaf node-name {
          type string;
          description
            "Name of the compute node.";
        }
        leaf node-location {
          type string;
          description
            "Location of the compute node, such as slot number.";
        }
      }
    list
    }
    container tpms {
      description
        "Holds the set of TPMs within an Attester.";
      list tpm {
        key tpm-name;
        unique "tpm-path";
          description
           "A list of TPMs in this composite device that RATS
           can be conducted with.";
        uses tpm-name;
        leaf hardware-based {
        config false;
          type boolean;
          config false;
          description
            "Answers the question: is this TPM is a hardware based
            TPM?";
        }
        leaf tpm-physical-index tpm-physical-index {
          if-feature ietfhw:entity-mib;
          type int32 {
            range "1..2147483647";
          }
          config false;
          description
            "The entPhysicalIndex for the TPM.";
          reference
            "RFC 6933: Entity MIB (Version 4) - entPhysicalIndex";
        }
        leaf tpm-path {
          type string;
          config false;
          description
            "Path to a unique TPM on a device.  This can change agross
            reboots.";
        }
        leaf compute-node {
          when "../../../compute-nodes";
          type compute-node-ref;
          config false;
          mandatory true;
          description
            "When there is more that one TPM, this indicates for which
            compute node this TPM services.";
        }
        leaf tpm-manufacturer {
          type string;
          config false;
          description
            "TPM manufacturer name.";
        }
        leaf tpm-firmware-version {
          type identityref {
            base taa:cryptoprocessor;
          }
          mandatory true;
          description
            "Identifies the cryptoprocessor API set supported.  This
            cannot be configured.  However it is referenced via XPATH
            as part of configuration, so is shown as 'rw'
            to eliminate YANG warnings related NMDA.";
        }
        uses TPM12-hash-algo {
          when "tpm-firmware-version = 'taa:tpm12'";
          refine TPM12-hash-algo {
            description
              "The hash algorithm overwrites the default used for PCRs
              on this TPM1.2 compliant cryptoprocessor.";
          }
        }
        leaf-list TPM12-pcrs {
          when "../tpm-firmware-version = 'taa:tpm12'";
          type pcr;
          description
            "The PCRs which may be extracted from this TPM1.2
            compliant cryptoprocessor.";
        }
        list tpm20-pcr-bank {
          when "../tpm-firmware-version = 'taa:tpm20'";
          key "TPM20-hash-algo";
          description
            "Specifies the list of PCRs that may be extracted for
            a specific Hash Algorithm on this TPM2 compliant
            cryptoprocessor.  A bank is a set of PCRs which are
            extended using a particular hash algorithm.";
          reference
            "https://www.trustedcomputinggroup.org/wp-content/uploads/
             TPM-Rev-2.0-Part-2-Structures-01.38.pdf  Section 10.9.7";
          leaf TPM20-hash-algo {
        if-feature ietfhw:entity-mib;
        config false;
            must "/tpm:rats-support-structures"
               + "/tpm:attester-supported-algos"
               + "/tpm:tpm20-hash" {
              error-message "Not a platform supported TPM20-hash-algo";
            }
            type int32 identityref {
          range "1..2147483647";
              base taa:hash;
            }
            description
              "The entPhysicalIndex for the TPM.";
        reference
          "RFC 6933: Entity MIB (Version 4) - entPhysicalIndex"; hash scheme actively being used to hash a
              one or more TPM2.0 PCRs.";
          }
      leaf tpm-path
          leaf-list pcr-index {
            type string;
        config false; tpm:pcr;
            description
          "Path
              "Defines what TPM2 PCRs are available to a unique TPM on a device.  This can change agross reboots."; be extracted.";
          }
        }
        leaf compute-node tpm-status {
        when "../../compute-nodes";
        config false;
        mandatory true;
          type compute-node-ref; enumeration {
            enum operational {
              value 0;
              description
          "When there
                "The TPM currently is more that one TPM, this indicates for which
          compute node this currently running normally and
                is ready to accept and process TPM services.";
      }
      leaf tpm-manufacturer {
        config false;
        type string;
        description
          "TPM manufacturer name."; quotes.";
              reference
                "TPM-Rev-2.0-Part-1-Architecture-01.07-2014-03-13.pdf
                Section 12";
            }
      leaf tpm-firmware-version
            enum non-operational {
        config false;
        type string;
              value 1;
              description
                "TPM firmware version."; is in a state such as startup or shutdown which
                precludes the processing of TPM quotes.";
            }
      leaf tpm-specification-version {
        type identityref {
          base cryptoprocessor;
          }
          config false;
          mandatory true;
          description
          "Identifies the cryptoprocessor API set supported";
      }
      leaf tpm-status {
        type string;
        config false;
        description
            "TPM chip self-test status, normal or abnormal."; status.";
        }
        container certificates {
          description
            "The TPM's certificates, including EK certificates
             and AK certificates.";
          list certificate {
          config true;
            key "certificate-name";
            description
              "Three types of certificates can be accessed via
               this statement, including Initial Attestation
               Key Cert, Local Attestation Key Cert or
               Endorsement Key Cert.";
          uses certificate-name;
            leaf certificate-ref certificate-name {
              type string;
              description
                "An arbitrary name uniquely identifying a certificate
                 associated within key within a TPM.";
            }
            leaf certificate-keystore-ref {
              type leafref {
                path "/ks:keystore/ks:asymmetric-keys/ks:asymmetric-key"
                   + "/ks:certificates/ks:certificate/ks:name";
              }
              description
                "A reference to a specific certificate of an
                 asymmetric key in the Keystore.";
                 /* Note: It is also possible to import a grouping which
                    allows local definition via an imported keystore
                    schema. */
            }
            leaf certificate-type {
              type enumeration {
                enum endorsement-cert {
                  value 0;
                  description
                    "Endorsement Key (EK) Certificate type.";
                }
                enum initial-attestation-cert {
                  value 1;
                  description
                    "Initial Attestation key (IAK) Certificate type.";
                }
                enum local-attestation-cert {
                  value 2;
                  description
                    "Local Attestation Key (LAK) Certificate type.";
                }
              }
              description
                "Type of this certificate";
            }
          }
        }
      }
    }
    container attester-supported-algos {
      description
        "Identifies which TPM algorithms are available for use on an
        attesting platform.";
      leaf-list tpm12-asymmetric-signing {
        if-feature "taa:TPM12";
        when "../../tpm:tpms" +
             "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm12']";
        type identityref {
          base taa:asymmetric;
        }
        description
          "Platform Supported TPM12 asymmetric algorithms.";
      }
      leaf-list tpm12-hash {
        if-feature "taa:TPM12";
        when "../../tpm:tpms" +
             "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm12']";
        type identityref {
          base taa:hash;
        }
        description
          "Platform supported TPM12 hash algorithms.";
      }
      leaf-list tpm20-asymmetric-signing {
        if-feature "taa:TPM20";
        when "../../tpm:tpms" +
             "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm20']";
        type identityref {
          base taa:asymmetric;
        }
        description
          "Platform Supported TPM20 asymmetric algorithms.";
      }
      leaf-list tpm20-hash {
        if-feature "taa:TPM20";
        when "../../tpm:tpms" +
             "/tpm:tpm[tpm:tpm-firmware-version='taa:tpm20']";

        type identityref {
          base taa:hash;
        }
        description
          "Platform supported TPM20 hash algorithms.";
      }
    }
  }
}
<CODE ENDS>
2.3.  ietf-asymmetric-algs

2.2.2.  ietf-tcg-algs

   Cryptographic algorithm types were initially included within -v14
   NETCONF's iana-crypto-types.yang.  Unfortunately all this content
   including the algorithms needed here failed to make the -v15 used
   WGLC.  Therefore  As a modified version result this document has encoded the TCG Algorithm
   definitions of [TCG-Algos], revision 1.32.  By including this draft full
   table as a separate YANG file within this document, it is included here.
   Perhaps someone possible
   for other YANG models to leverage the contents of this model.

2.2.2.1.  Features

   There are two types of features supported <TPM12> and <TPM20>.
   Support for either of these features indicates that a cryptoprocessor
   supporting the corresponding type of TCG API is present on an
   Attester.  Most commonly, only one type of cryptoprocessor will steward be
   available on an Attester.

2.2.2.2.  Identities

   There are three types of identities in this list as model.

   The first are the cryptographic functions supportable by a separate draft. TPM
   algorithm, these include: <asymmetric>, <symmetric>, <hash>,
   <signing>, <anonymous_signing>, <encryption_mode>, <method>, and
   <object_type>.  The definitions of each of these are in Table 2 of
   [TCG-Algos].

   The second are API specifications for tpms: <tpm12> and <tpm2>.

   The third are specific algorithm types.  Each algorithm type defines
   what cryptographic functions may be supported, and on which type of
   API specification.  It is not required that an implementation of a
   specific TPM will support all algorithm types.  The contents of each
   specific algorithm mirrors what is in Table 3 of [TCG-Algos].

2.2.2.3.  YANG Module

<CODE BEGINS> ietf-asymmetric-algs@2020-06-12.yang ietf-tcg-algs@2020-09-18.yang
module ietf-asymmetric-algs ietf-tcg-algs {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-asymmetric-algs"; "urn:ietf:params:xml:ns:yang:ietf-tcg-algs";
  prefix aa; taa;

  organization
    "IETF NETCONF (Network Configuration) RATS Working Group";

  contact
    "WG Web:   <http://datatracker.ietf.org/wg/netconf/>   <http://datatracker.ietf.org/wg/rats/>
     WG List:  <mailto:netconf@ietf.org>  <mailto:rats@ietf.org>
     Author:   Eric Voit <mailto:evoit@cisco.com>
     Author:   Kent Watsen <mailto:kent+ietf@watsen.net>
     Author:   Wang Haiguang <wang.haiguang.shieldlab@huawei.com>"; <mailto:evoit@cisco.com>";

  description
    "This module defines a identities for asymmetric algorithms.

     Copyright (c) 2020 IETF Trust and the persons identified
     as authors of the code. All rights reserved.
     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Simplified
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).
     This version of this YANG module is part of RFC XXXX
     (https://www.rfc-editor.org/info/rfcXXXX); see the RFC
     itself for full legal notices.
     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2020-06-12 2020-09-18 {
    description
      "Initial version";
    reference
      "RFC XXXX: tbd
       initial draft: draft-voit-rats-trusted-path-routing
       concepts from ietf-asymmetric-algs.yang which did not progress to
       WGLC in NETCONF."; tbd";
  }

  /*****************/
  /*   Features    */
  /*****************/
  feature TPM12 {
    description
      "This feature indicates algorithm support for the TPM 1.2 API."; API
      as per TPM-main-1.2-Rev94-part-2, Section 4.8.";
  }

  feature TPM20 {
    description
      "This feature indicates algorithm support for the TPM 2.0 API.";
  }

  feature iana {
    description
      "This feature indicates support for the IANA algorithms defined
      in Registry xxxxx"; API
      as per TPM-Rev-2.0-Part-1-Architecture-01.38 Section 11.4.";
  }

  /*****************/
  /*  Identities   */
  /*****************/

  /*  There needs to be collasping/verification of some of the identity
      types between the various algorithm types listed below */

  identity asymmetric-algorithm-type asymmetric {
    description
      "A TCG recognized asymmetric algorithm with a public and
      private key.";
    reference
      "http://trustedcomputinggroup.org/resource/tcg-algorithm-registry/
      TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity symmetric {
    description
      "A TCG recognized symmetric algorithm with only a private key.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity hash {
    description
      "A TCG recognized hash algorithm that compresses input data to
      a digest value or indicates a method that uses a hash.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity signing {
    description
      "A TCG recognized signing algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity anonymous_signing {
    description
      "A TCG recognized anonymous signing algorithm.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity encryption_mode {
    description
      "Base
      "A TCG recognized encryption mode.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity identityerating various asymmetric key algorithms."; method {
    description
      "A TCG recognized method such as a mask generation function.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity iana-asymmetric-algorithm object_type {
    description
      "A TCG recognized object type.";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 2";
  }

  identity cryptoprocessor {
    base asymmetric-algorithm-type;
    description
      "Base identity identityerating various asymmetric key algorithms."; identifying a crytoprocessor.";
  }

  identity tpm12-asymmetric-algorithm tpm12 {
    if-feature "TPM12";
    base asymmetric-algorithm-type; cryptoprocessor;
    description
      "Base identity identityerating various asymmetric key algorithms.";
      "Supportable by a TPM1.2.";
    reference
      "TPM-Main-Part-2-TPM-Structures_v1.2_rev116_01032011.pdf
      TPM_ALGORITHM_ID values, page 18";
  }

  identity tpm2-asymmetric-algorithm tpm20 {
    if-feature "TPM12";
    base asymmetric-algorithm-type; cryptoprocessor;
    description
      "Base identity identityerating various asymmetric key algorithms.";
      "Supportable by a TPM2.";
    reference
      "TPM-Rev-2.0-Part-2-Structures-01.38.pdf
      The TCG Algorithm Registry ID value. Registry. Table 9";
  }

  identity rsa TPM_ALG_RSA {
    if-feature "TPM12 or TPM20";
    base tpm12;
    base tpm20;
    base tpm12-asymmetric-algorithm; asymmetric;
    base tpm2-asymmetric-algorithm; object_type;
    description
      "RFC 3447 - the RSA
      "RSA algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      RFC 8017. ALG_ID: 0x0001";

  }

  identity rsa1024 TPM_ALG_TDES {
    if-feature "iana"; "TPM12";
    base iana-asymmetric-algorithm; tpm12;
    base rsa; symmetric;
    description
      "The RSA algorithm using a 1024-bit key.";
      "Block cipher with various key sizes (Triple Data Encryption
       Algorithm, commonly called Triple Data Encryption Standard)
       Note: was banned in TPM1.2 v94";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 18033-3. ALG_ID: 0x0003";

  }

  identity rsa2048 TPM_ALG_SHA1 {
    if-feature "iana"; "TPM12 or TPM20";
    base hash;
    base iana-asymmetric-algorithm; tpm12;
    base rsa; tpm20;
    description
      "The RSA
      "SHA1 algorithm using a 2048-bit key."; - Deprecated due to insufficient cryptographic
      protection.  However it is still useful for hash algorithms
      where protection is not required.";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10118-3. ALG_ID: 0x0004";

  }

  identity rsa3072 TPM_ALG_HMAC  {
    if-feature "iana"; "TPM12 or TPM20";
    base tpm12;
    base iana-asymmetric-algorithm; tpm20;
    base rsa; hash;
    base signing;
    description
      "The RSA algorithm using a 3072-bit key.";
      "Hash Message Authentication Code (HMAC) algorithm";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3,
      ISO/IEC 9797-2 and RFC2014. ALG_ID: 0x0005";

  }

  identity rsa4096 TPM_ALG_AES  {
    if-feature "iana"; "TPM12";
    base iana-asymmetric-algorithm; tpm12;
    base rsa; symmetric;
    description
      "The RSA AES algorithm using a 4096-bit key."; with various key sizes";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 18033-3. ALG_ID: 0x0006";

  }

  identity rsa7680 TPM_ALG_MGF1 {
    if-feature "iana"; "TPM20";
    base iana-asymmetric-algorithm; tpm20;
    base rsa; hash;
    base method;
    description
      "The RSA algorithm using a 7680-bit key.";
      "hash-based mask-generation function";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3,
      IEEE Std 1363-2000 and IEEE Std 1363a -2004.
      ALG_ID: 0x0007";

  }

  identity rsa15360 TPM_ALG_KEYEDHASH {
    if-feature "iana"; "TPM20";
    base iana-asymmetric-algorithm; tpm20;
    base rsa; hash;
    base object_type;
    description
      "The RSA
      "An encryption or signing algorithm using a 15360-bit key."; keyed hash.  These
      may use XOR for encryption or an HMAC for signing and may
      also refer to a data object that is neither signing nor
      encrypting.";
    reference
      "RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. . ALG_ID: 0x0008";

    }

  identity secp192r1 TPM_ALG_XOR {
    if-feature "iana"; "TPM12 or TPM20";
    base tpm12;
    base iana-asymmetric-algorithm; tpm20;
    base hash;
    base symmetric;
    description
      "The asymmetric algorithm using a NIST P192 Curve."; XOR encryption algorithm.";
    reference
      "RFC 6090: Fundamental Elliptic Curve Cryptography Algorithms.
       RFC 5480: Elliptic Curve Cryptography Subject Public Key
                 Information.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. ALG_ID: 0x000A";

  }

  identity secp224r1 TPM_ALG_SHA256 {
    if-feature "iana"; "TPM20";
    base tpm20;
    base iana-asymmetric-algorithm; hash;
    description
      "The asymmetric algorithm using a NIST P224 Curve."; SHA 256 algorithm";
    reference
      "RFC 6090: Fundamental Elliptic Curve Cryptography Algorithms.
       RFC 5480: Elliptic Curve Cryptography Subject Public Key
                 Information.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10118-3. ALG_ID: 0x000B";

  }

  identity secp256r1 TPM_ALG_SHA384  {
    if-feature "iana"; "TPM20";
    base tpm20;
    base iana-asymmetric-algorithm; hash;
    description
      "The asymmetric algorithm using a NIST P256 Curve.";
    reference
      "RFC 6090: Fundamental Elliptic Curve Cryptography Algorithms.
       RFC 5480: Elliptic Curve Cryptography Subject Public Key
                 Information."; SHA 384 algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10118-3. ALG_ID: 0x000C";

  }
  identity secp384r1 TPM_ALG_SHA512  {
    if-feature "TPM20";
    base iana-asymmetric-algorithm; tpm20;
    base hash;
    description
      "The asymmetric algorithm using a NIST P384 Curve."; SHA 512 algorithm";
    reference
      "RFC 6090: Fundamental Elliptic Curve Cryptography Algorithms.
       RFC 5480: Elliptic Curve Cryptography Subject Public Key
                 Information.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10118-3. ALG_ID: 0x000D";

  }

  identity secp521r1 TPM_ALG_NULL {
    if-feature "iana"; "TPM20";
    base iana-asymmetric-algorithm; tpm20;
    description
      "The asymmetric algorithm using a NIST P521 Curve.";
      "NULL algorithm";
    reference
      "RFC 6090: Fundamental Elliptic Curve Cryptography Algorithms.
       RFC 5480: Elliptic Curve Cryptography Subject Public Key
                 Information.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. ALG_ID: 0x0010";

  }

  identity x25519 TPM_ALG_SM3_256 {
    if-feature "iana"; "TPM20";
    base tpm20;
    base iana-asymmetric-algorithm; hash;
    description
      "The asymmetric algorithm using a x.25519 Curve."; SM3 hash algorithm.";
    reference
      "RFC 7748: Elliptic Curves for Security.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      GM/T 0004-2012 - SM3_256. ALG_ID: 0x0012";

  }

  identity x448 TPM_ALG_SM4 {
    if-feature "iana"; "TPM20";
    base iana-asymmetric-algorithm; tpm20;
    base symmetric;
    description
      "The asymmetric algorithm using a x.448 Curve.";
      "SM4 symmetric block cipher";
    reference
      "RFC 7748: Elliptic Curves for Security.";
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      GB/T 32907-2016. ALG_ID: 0x0013";

  }

  identity SHA1 TPM_ALG_RSASSA {
    if-feature "TPM20 or TPM12"; "TPM20";
    base tpm20;
    base tpm12-asymmetric-algorithm; asymmetric;
    base tpm2-asymmetric-algorithm; signing;
    description
      "ISO/IEC 10118-3 - SHA1 algorithm";
      "Signature algorithm defined in section 8.2 (RSASSAPKCS1-v1_5)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and RFC 8017.
      ALG_ID: 0x0014";

  }

  identity HMAC TPM_ALG_RSAES {
    if-feature "TPM20 or TPM12"; "TPM20";
    base tpm12-asymmetric-algorithm; tpm20;
    base tpm2-asymmetric-algorithm; asymmetric;
    base encryption_mode;
    description
      "ISO/IEC 9797-2 - Hash Message Authentication Code (HMAC)
      "Signature algorithm
      also RFC2014.
      we need to verify if NMAC implementation isn't different defined in the two."; section 7.2 (RSAES-PKCS1-v1_5)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and RFC 8017
      ALG_ID: 0x0015";

  }

  identity AES TPM_ALG_RSAPSS {
    if-feature "TPM20 or TPM12"; "TPM20";
    base tpm20;
    base tpm2-asymmetric-algorithm; asymmetric;
    base signing;
    description
      "ISO/IEC 18033-3 - the AES algorithm";
      "Padding algorithm defined in section 8.1 (RSASSA PSS)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and RFC 8017.
      ALG_ID: 0x0016";

  }

  identity AES128 TPM_ALG_OAEP {
    if-feature "TPM12"; "TPM20";
    base tpm12-asymmetric-algorithm; tpm20;
    base AES; asymmetric;
    base encryption_mode;
    description
      "ISO/IEC 18033-3 - the AES algorithm, key size 128";
      "Padding algorithm defined in section 7.1 (RSASSA OAEP)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and RFC 8017.
      ALG_ID: 0x0017";

  }

  identity AES192 TPM_ALG_ECDSA {
    if-feature "TPM12"; "TPM20";
    base tpm12-asymmetric-algorithm; tpm20;
    base AES; asymmetric;
    base signing;
    description
      "ISO/IEC 18033-3 - the AES algorithm, key size 192";
      "Signature algorithm using elliptic curve cryptography (ECC)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 14888-3. ALG_ID: 0x0018";

  }

  identity AES256 TPM_ALG_ECDH {
    if-feature "TPM12"; "TPM20";
    base tpm20;
    base tpm12-asymmetric-algorithm; asymmetric;
    base AES; method;
    description
      "ISO/IEC 18033-3 - the AES algorithm, key size 256";
      "Secret sharing using ECC";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-56A and RFC 7748. ALG_ID: 0x0019";

  }

  identity MGF1 TPM_ALG_ECDAA {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base asymmetric;
    base signing;
    base anonymous_signing;
    description
      "IEEE Std 1363a -2004 - hash-based mask-generation function";
      "Elliptic-curve based anonymous signing scheme";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. ALG_ID: 0x001A";

  }

  identity KEYEDHASH TPM_ALG_SM2 {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base asymmetric;
    base signing;
    base encryption_mode;
    base method;
    description
      "TPM2 KEYEDHASH
      "SM2 - depending on context, either an elliptic-curve based,
      signature algorithm, an encryption scheme, or signing algorithm using a keyed hash"; key exchange
      protocol";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      A GM/T 0003.1-2012, GM/T 0003.2-2012, GM/T 0003.3-2012,
      GM/T 0003.5-2012 SM2. ALG_ID: 0x001B";

  }

  identity XOR TPM_ALG_ECSCHNORR {
    if-feature "TPM20 or TPM12"; "TPM20";
    base tpm20;
    base tpm12-asymmetric-algorithm; asymmetric;
    base tpm2-asymmetric-algorithm; signing;
    description
        "TPM2 XOR";
      "Elliptic-curve based Schnorr signature";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. ALG_ID: 0x001C";

  }

  identity SHA256 TPM_ALG_ECMQV {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base asymmetric;
    base method;
    description
      "ISO/IEC 10118-3 - the SHA 256 algorithm";
      "Two-phase elliptic-curve key";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-56A. ALG_ID: 0x001D";

  }

  identity SHA384 TPM_ALG_KDF1_SP800_56A {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base hash;
    base method;
    description
      "ISO/IEC 10118-3 - the SHA 384 algorithm";
      "Concatenation key derivation function";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-56A  (approved alternative1) section 5.8.1.

      ALG_ID: 0x0020";

  }

  identity SHA512 TPM_ALG_KDF2  {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base hash;
    base method;
    description
      "ISO/IEC 10118-3 - the SHA 512 algorithm";
      "Key derivation function";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      IEEE 1363a-2004 KDF2 section 13.2. ALG_ID: 0x0021";

  }

  identity NULL TPM_ALG_KDF1_SP800_108 {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; TPM_ALG_KDF2;
    description
      "TPM2 NULL";
      "A key derivation method";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-108 - Section 5.1 KDF. ALG_ID: 0x0022";

  }

  identity SM3_256 TPM_ALG_ECC {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base asymmetric;
    base object_type;
    description
      "GM/T 0004-2012 - SM3_256";
      "Prime field ECC";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 15946-1. ALG_ID: 0x0023";

  }

  identity SM4 TPM_ALG_SYMCIPHER {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    description
      "GM/T 0004-2012 - SM4
      "Object type for a symmetric block cipher";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      TCG TPM 2.0 library specification. ALG_ID: 0x0025";

  }

  identity RSASSA TPM_ALG_CAMELLIA {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm;
    description
      "RFC 3447 - defined in section 8.2 (RSASSAPKCS1-v1_5)";
  }

  identity RSAES {
    if-feature "TPM20"; tpm20;
    base tpm2-asymmetric-algorithm; symmetric;
    description
      "RFC 3447 - defined in section 7.2 (RSAES-PKCS1-v1_5)";
      "The Camellia algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 18033-3. ALG_ID: 0x0026";

  }

  identity RSAPSS TPM_ALG_SHA3_256  {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base hash;
    description
      "RFC 3447
      "ISO/IEC 10118-3 - defined in section 8.1 (RSASSA PSS)"; the SHA 256 algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST PUB FIPS 202. ALG_ID: 0x0027";

  }

  identity OAEP TPM_ALG_SHA3_384 {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base hash;
    description
      "RFC 3447 - defined in section 7.1 (RSASSA OAEP)";
      "The SHA 384 algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST PUB FIPS 202. ALG_ID: 0x0028";

  }

  identity ECDSA TPM_ALG_SHA3_512 {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base hash;
    description
      "ISO/IEC 14888-3 - elliptic curve cryptography (ECC)";
      "The SHA 512 algorithm";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST PUB FIPS 202. ALG_ID: 0x0029";

  }

  identity ECDH TPM_ALG_CMAC {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    description
      "NIST SP800-56A - secret sharing using ECC";
      "block Cipher-based Message Authentication Code (CMAC)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 9797-1:2011 Algorithm 5. ALG_ID: 0x003F";

  }

  identity ECDAA TPM_ALG_CTR {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base encryption_mode;
    description
      "TPM2 - elliptic-curve based anonymous signing scheme";
      "Counter mode";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10116. ALG_ID: 0x0040";

  }

  identity SM2 TPM_ALG_OFB {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base encryption_mode;
    description
      "A GM/T 0003.1-2012, GM/T 0003.2-2012, GM/T 0003.3-2012,
      GM/T 0003.5-2012   SM2";
      "Output Feedback mode";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10116. ALG_ID: 0x0041";

  }

  identity ECSCHNORR TPM_ALG_CBC {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base encryption_mode;
    description
      "TPM2 - elliptic-curve based Schnorr signature";
      "Cipher Block Chaining mode";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10116. ALG_ID: 0x0042";

  }

  identity ECMQV TPM_ALG_CFB {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base encryption_mode;
    description
      "NIST SP800-56A - two-phase elliptic-curve key";
      "Cipher Feedback mode";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10116. ALG_ID: 0x0043";

  }

  identity KDF1_SP800_56A TPM_ALG_ECB  {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm;
    description
      "NIST SP800-56A - concatenation key derivation function,
      (approved alternative1) section 5.8.1";
  }

  identity KDF2 {
    if-feature "TPM20"; tpm20;
    base tpm2-asymmetric-algorithm; symmetric;
    base encryption_mode;
    description
      "IEEE 1363a-2004 - key derivation function KDF2 section 13.2";
      "Electronic Codebook mode";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      ISO/IEC 10116. ALG_ID: 0x0044";

  }

  identity KDF1_SP800_108 TPM_ALG_CCM  {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    base encryption_mode;
    description
      "NIST SP800-108 - Section 5.1 KDF in Counter Mode";
      "Counter with Cipher Block Chaining-Message Authentication
      Code (CCM)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-38C. ALG_ID: 0x0050";

  }

  identity ECC TPM_ALG_GCM {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    base encryption_mode;
    description
      "ISO/IEC 15946-1 - prime field ECC";
      "Galois/Counter Mode (GCM)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-38D. ALG_ID: 0x0051";

  }

  identity SYMCIPHER TPM_ALG_KW {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    base encryption_mode;
    description
      "TPM2 - object type for a symmetric block cipher";
      "AES Key Wrap (KW)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-38F. ALG_ID: 0x0052";

  }

  identity CAMELLIA TPM_ALG_KWP {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    base encryption_mode;
    description
      "ISO/IEC 18033-3 - the  Camellia algorithm";
      "AES Key Wrap with Padding (KWP)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-38F. ALG_ID: 0x0053";

  }

  identity CTR TPM_ALG_EAX  {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base symmetric;
    base signing;
    base encryption_mode;
    description
      "ISO/IEC 10116 - Counter mode";
      "Authenticated-Encryption Mode";

    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      NIST SP800-38F. ALG_ID: 0x0054";

  }

  identity OFB TPM_ALG_EDDSA {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm; tpm20;
    base asymmetric;
    base signing;
    description
      "ISO/IEC 10116
      "Edwards-curve Digital Signature Algorithm (PureEdDSA)";
    reference
      "TCG_Algorithm_Registry_r1p32_pub Table 3 and
      RFC 8032. ALG_ID: 0x0060";

  }

}
<CODE ENDS>

   Note that not all cryptographic functions are required for use by
   ietf-tpm-remote-attestation.yang.  However the full definition of
   Table 3 of [TCG-Algos] will allow use by additional YANG
   specifications.

3.  IANA considerations

   This document will include requests to IANA:

   To be defined yet.  But keeping up with changes to ietf-tcg-algs.yang
   will be necessary.

4.  Security Considerations

   The YANG module specified in this document defines a schema for data
   that is designed to be accessed via network management protocols such
   as NETCONF [RFC6241] or RESTCONF [RFC8040].  The lowest NETCONF layer
   is the secure transport layer, and the mandatory-to-implement secure
   transport is Secure Shell (SSH) [RFC6242].  The lowest RESTCONF layer
   is HTTPS, and the mandatory-to-implement secure transport is TLS
   [RFC5246].

   There are a number of data nodes defined in this YANG module that are
   writable/creatable/deletable (i.e., config true, which is the
   default).  These data nodes may be considered sensitive or vulnerable
   in some network environments.  Write operations (e.g., edit-config)
   to these data nodes without proper protection can have a negative
   effect on network operations.  These are the subtrees and data nodes
   and their sensitivity/vulnerability:

   Container: </rats-support-structures/attester-supported-algos>

   o  <tpm12-asymmetric-signing>, <tpm12-hash>, <tpm20-asymmetric-
      signing>, and <tpm20-hash> all could be populated with algorithms
      which are not supported by the underlying physical TPM installed
      by the equipment vendor.

   Container: </rats-support-structures/tpms>

   o  <tpm-name> - Output Feedback mode";
  }

  identity CBC {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm;
    description
      "ISO/IEC 10116 Although shown as 'rw', it is system generated

   o  <tpm20-pcr-bank> - Cipher Block Chaining mode";
  }

  identity CFB {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm;
    description
      "ISO/IEC 10116 It is possible to configure PCRs for extraction
      which are not being extended by system software.  This could
      unnecessarily use TPM resources.

   o  <certificates> - Cipher Feedback mode";
  }

  identity ECB {
    if-feature "TPM20";
    base tpm2-asymmetric-algorithm;
    description
      "ISO/IEC 10116 It is possible to provision a certificate which
      does not correspond to a Attestation Identity Key (AIK) within the
      TPM.

   RPC: <tpm12-challenge-response-attestation> - Electronic Codebook mode";
  }

}
<CODE ENDS>

3.  IANA considerations

   This document will include requests Need to IANA:

   To be defined yet.

4.  Security Considerations

   There are always some. verify that the
   certificate is for an active AIK.

   RPC: <tpm20-challenge-response-attestation> - Need to verify that the
   certificate is for an active AIK.

   RPC: <log-retrieval> - Pulling lots of logs can chew up system
   resources.

5.  Acknowledgements

   Not yet.

6.  Change Log

   Changes from version 02 to version 03:

   o  moved to tcg-algs

   o  cleaned up model to eliminate sources of errors

   o  removed key establishment RPC

   o  added lots of XPATH which must all be scrubbed still
   o  Descriptive text added on model contents.

   Changes from version 01 to version 02:

   o  Extracted Crypto-types into a separate YANG file

   o  Mades the algorithms explicit, not strings

   o  Hash Algo as key the selected TPM2 PCRs

   o  PCR numbers are their own type

   o  Eliminated nested keys for node-id plus tpm-name

   o  Eliminated TPM-Name of "ALL"

   o  Added TPM-Path

   Changes from version 00 to version 01:

   o  Addressed author's comments

   o  Extended complementary details about attestation-certificates

   o  Relabeled chunk-size to log-entry-quantity

   o  Relabeled location with compute-node or tpm-name where appropriate

   o  Added a valid entity-mib physical-index to compute-node and tpm-
      name to map it back to hardware inventory

   o  Relabeled name to tpm_name

   o  Removed event-string in last-entry

7.  References

7.1.  Normative References

   [I-D.birkholz-rats-reference-interaction-model]
              Birkholz, H. and M. H., Eckel, M., Newton, C., and L. Chen,
              "Reference Interaction Models for Remote Attestation
              Procedures", draft-birkholz-rats-
              reference-interaction-model-02 draft-birkholz-rats-reference-interaction-
              model-03 (work in progress), January July 2020.

   [I-D.ietf-netconf-crypto-types]

   [I-D.ietf-netconf-keystore]
              Watsen, K., "Common "A YANG Data Types Model for Cryptography",
              draft-ietf-netconf-crypto-types-15 a Keystore", draft-
              ietf-netconf-keystore-20 (work in progress), May August 2020.

   [I-D.ietf-rats-architecture]
              Birkholz, H., Thaler, D., Richardson, M., Smith, N., and
              W. Pan, "Remote Attestation Procedures Architecture",
              draft-ietf-rats-architecture-06 (work in progress),
              September 2020.

   [I-D.ietf-rats-tpm-based-network-device-attest]
              Fedorkow, G., Voit, E., and J. Fitzgerald-McKay, "TPM-
              based Network Device Remote Integrity Verification",
              draft-ietf-rats-tpm-based-network-device-attest-04 (work
              in progress), September 2020.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC6991]  Schoenwaelder, J., Ed., "Common YANG Data Types",
              RFC 6991, DOI 10.17487/RFC6991, July 2013,
              <https://www.rfc-editor.org/info/rfc6991>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8348]  Bierman, A., Bjorklund, M., Dong, J., and D. Romascanu, "A
              YANG Data Model for Hardware Management", RFC 8348,
              DOI 10.17487/RFC8348, March 2018,
              <https://www.rfc-editor.org/info/rfc8348>.

   [TCG-Algos]
              "TCG_Algorithm_Registry_r1p32_pub", n.d.,
              <hhttp://trustedcomputinggroup.org/resource/tcg-algorithm-
              registry/>.

   [TPM1.2]   TCG, ., "TPM 1.2 Main Specification", October 2003,
              <https://trustedcomputinggroup.org/resource/tpm-main-
              specification/>.

   [TPM2.0]   TCG, ., "TPM 2.0 Library Specification", March 2013,
              <https://trustedcomputinggroup.org/resource/tpm-library-
              specification/>.

7.2.  Informative References

   [I-D.ietf-rats-architecture]
              Birkholz, H., Thaler, D., Richardson,

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <https://www.rfc-editor.org/info/rfc5246>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Smith, N., Ed., Schoenwaelder, J., Ed.,
              and
              W. Pan, "Remote Attestation Procedures Architecture",
              draft-ietf-rats-architecture-04 (work in progress), May
              2020. A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6242]  Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <https://www.rfc-editor.org/info/rfc6242>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.

Authors' Addresses

   Henk Birkholz
   Fraunhofer SIT
   Rheinstrasse 75
   Darmstadt  64295
   Germany

   Email: henk.birkholz@sit.fraunhofer.de

   Michael Eckel
   Fraunhofer SIT
   Rheinstrasse 75
   Darmstadt  64295
   Germany

   Email: michael.eckel@sit.fraunhofer.de

   Eric Voit
   Cisco Systems

   Email: evoit@cisco.com

   Shwetha Bhandari
   Cisco Systems

   Email: shwethab@cisco.com
   Bill Sulzen
   Cisco Systems

   Email: bsulzen@cisco.com

   Eric Voit
   Cisco Systems

   Email: evoit@cisco.com

   Liang Xia (Frank)
   Huawei Technologies
   101 Software Avenue, Yuhuatai District
   Nanjing, Jiangsu  210012
   China

   Email: Frank.Xialiang@huawei.com

   Tom Laffey
   Hewlett Packard Enterprise

   Email: tom.laffey@hpe.com

   Guy C. Fedorkow
   Juniper Networks
   10 Technology Park Drive
   Westford, Massachusetts  01886

   Email: gfedorkow@juniper.net